Fixxah
09-28-2008, 05:06 PM
:confused:My bullets all seem to have lube above the area that sits in the finished case. Is this something that needs to be cleaned off due to increased pressure in barrel or am I good to go.
About 90% of my sized .45 comes out of Star that way and I can't seem to figure out whether my heater needs to be adjusted along with pressure screw on tube. Every 50 or so rounds I need to clear lube from seating/crimp die on my LNL.
I took pix but as of yet I can't find them in my PC. I'll try to get them again later.
John
About 90% of my sized .45 comes out of Star that way and I can't seem to figure out whether my heater needs to be adjusted along with pressure screw on tube. Every 50 or so rounds I need to clear lube from seating/crimp die on my LNL.
I took pix but as of yet I can't find them in my PC. I'll try to get them again later.
John