PDA

View Full Version : WTS: Contender barrels and handgun scopes


obssd1958
09-09-2018, 11:37 AM
The last two barrels - #4 and #5 - will only be available until I take them to the local gun show this weekend. Speak up now, if you want either!!!

I have 5 Contender barrels, and 5 handgun scopes for sale. Prices do not
include shipping, but flat rate box usually works the best. First "I'll take
it" wins! Please follow up with a PM to work out the details.
USPS money order, PayPal +3% or Paypal family option.

All barrels are in excellent condition, with sharp clean rifling. The only marks being the normal rubs from the frame.
Without further ado...

1. 6 1/2" .45 ACP barrel. Barely used. Blued, with standard sights and TCA Logo. This was
a special collectible offering from the Thompson Center Association.
Add it to your collection for $225! Sold to Preacher Jim and shipped


2. 10" 32-20 Winchester, $175 (500 brass available to the purchaser for additional cost) Sold to Dpmsman and shipped

3. 10" .357 Maximum, $175 (300 brass available to the purchaser for additional cost) Sold to Mr_Sheesh and shipped

4. 10" 7mm TCU, $150 (325 fireformed brass available to the purchaser for additional cost)

5. 10" 30-30 Winchester, with scope mount and rings. One of the scope mounting holes has been drilled and tapped larger to fix a formerly stripped hole. $175

6. 2x-7x Burris handgun scope, like new with box $175SPF to jem102

7. 5x Burris handgun scope, with adjustable objective $125 Sold to Dpmsman and shipped

8. 7x Burris handgun scope, with adjustable objective $150SPF to wdr2

9. 7x Burris handgun scope, with adjustable objective $150SPF to jem102

10. 1.5x-4x Tasco $40SPF to jem102

Thanks for looking!!

Don
226842
226843
226844
226845
mattw
09-09-2018, 12:29 PM
Can you reach the rifling with a bullet in #4 and not have the bullet fall out? Really like the idea of the TCU cabliber, but they cut the chambers so long that one could not get the right length. Still have dies and brass, but might be interested.
Dpmsman
09-09-2018, 12:42 PM
I’ll take the 32-20 Winchester barrel and the 5x Burris
50target
09-09-2018, 01:06 PM
Please put me back up to Dpmsman in case he can't consummate on the 32-20 barrel.
Bob
obssd1958
09-09-2018, 03:16 PM
Can you reach the rifling with a bullet in #4 and not have the bullet fall out? Really like the idea of the TCU cabliber, but they cut the chambers so long that one could not get the right length. Still have dies and brass, but might be interested.

Matt,
I'm not sure that I understand the question, but the RCBS 145gr silhouette or Saeco 145gr. bullet, seated out to 2.465, is the max length in this barrel, without hitting the lands. Both have all of the lube grooves still in the case at that length.

226885
obssd1958
09-10-2018, 09:33 AM
Back to the top - don't miss out!!
Preacher Jim
09-10-2018, 10:01 AM
I will take #1 it will be later before I can PM I am doing a funeral today.
funds sent.
mattw
09-10-2018, 10:20 AM
Matt,
I'm not sure that I understand the question, but the RCBS 145gr silhouette or Saeco 145gr. bullet, seated out to 2.465, is the max length in this barrel, without hitting the lands. Both have all of the lube grooves still in the case at that length.

226885

I have had 6mm and 7mm TCU factory barrels that I could not really set the bullets out far enough to reach the rifling. It was purely TC QC issues. Someday, I would love a good carbine barrel in either of the calibers. But, a 41 mag or 357 mag carbine barrel is on the top of my list.

That 45 acp barrel would be fun. I had the 6.5" 9mm TCA barrel for awhile and traded it for a 10mm at one point.
SSGOldfart
09-10-2018, 08:03 PM
I'll take the 45cal barrel,I'm inbound.
obssd1958
09-12-2018, 09:56 AM
List has been updated.
Still some wonderful barrels and great handgun scopes available!!
obssd1958
09-14-2018, 10:14 AM
I won't have internet connectivity starting mid day, the 15th, until the 23rd. Feel free to still reply to this post, but know that I won't see it for a week!
Thanks!!
obssd1958
09-23-2018, 04:18 PM
Back up to the top!!

[smilie=s::2_high5::cast_boolits::Luvcastboolits:[smilie=w:
obssd1958
09-24-2018, 10:59 AM
Re: 7mm TCU barrel ---

In addition to the brass, I also have a Bonanza neck sizing die and 2 complete FL die sets for the 7mm TCU, that we could negotiate on for a package deal. PM me for pictures or details!!
obssd1958
09-27-2018, 08:21 AM
I still have these two barrels for sale, and they will only be available until I take them to the local gun show, this weekend!!

4. 10" 7mm TCU, $150 (325 fireformed brass available to the purchaser for additional cost)

5. 10" 30-30 Winchester, with scope mount and rings. One of the scope mounting holes has been drilled and tapped larger to fix a formerly stripped hole. $175