unertl scope blocks

[porthos]

does anyone have a "selection" of scope blocks? i need a unique size to mount a unertl 20x BV on a 52B winchester. block needs to be 2.00 in or longer and 5/16 high. Steve Earle products dosen't do custom work any longer. neither "Champion" co carries them. worst case is that i fabricate one out of two blocks tig welded together.

[country gent]

You might want to include / add hole spacing for the block.

When I was working I made a few of these. Easiest way is to make them upside down. A piece of flat stock. mill the base and dovetail, drill the holes cut off block . in drill press cut counter bores then bolt to flat stock and finish top to fit in mill. Break edges and blue or case harden.