Walking stick photo

[sixshot]

Here's the photo's of the walking stick's I promised in my Muley with the 45 Thread. Both of these are about 15 years old & are 60" long. I use to get them from Boyds Gunstocks but they no longer offer them. Had 3 at one time but finally broke one dragging out an elk. You can see the original leather cord in the newer looking one compared to the longer cord I put in my old one which I'll replace today. These should be pretty easy to make if you have a wood lathe.

https://i.imgur.com/1CVwbCth.jpg
https://i.imgur.com/qFkp34jh.jpg

Dick

[redhawk0]

Very nice. A friend of mine used to make them from a straight section of Bittersweet vine, stripped the bark and lets them dry (weighted hanging upright to keep them straight) Then he carved them to final shape. The pattern on your sticks reminds me of some of the work he used to do.

redhawk

[MT Gianni]

Thanks, it has given me some ideas.

[smoked turkey]

Thanks from me also. I do have a wood lathe. I haven't turned anything on it in a long time. It is an old Craftsman that has a separate extension base that I can spread out to get the 5' if I need to. I just never extended it out that far before. I have lots of western red cedar trees here (a million would be a conservative guess!). My thinking is that one of those could be selected to make one of these walking sticks. I commented on the original post of the Muley 45 hunt. In it I asked what the approximate diameter of the top of the stick is. Seems like an ideal size for both strength and weight considerations.
Thanks again and I look forward to another hunting story. They are great.

[trapper9260]

I had make my walking stick from the shoot of a maple stump.it have a curve in it so it helps me to walk better. But like the ones in the photos.Thank you for posting.

[sixshot]

Guys, these work great if you are hunting in the west where you are spending most of the day on a side hill, they don't work as well on flat ground. I'm talking about using them as a shooting support. They are a bit long for flat type ground but on a side hill they work great, if you are planning on building one you might consider building an add on that threads on to the top so you can change lengths, just a thought.
When I went to Africa I used 3, 5/8" wooden dowels about 30" long & tied them together with a leather thong at the top about 5" down. Then I could spead them out & stick my handgun in the forks & shoot. On the bottom I had 3 rubber "feet" & it worked great, I never would have got my Blue Wildebeest without that set of shooting sticks! They were short enough to fit right in my aluminum gun box. I still use them. Best way is to place 2 of the legs just inside of your legs when sitting with the 3rd leg toward you some what, try it. I can send a photo.
Here is a photo of a cow elk I shot at 168 yds a few years ago with my old model Ruger 45 using my walking stick as a rest. I had it stuck in the deep snow at an angle across my left thigh & my left wrist through the leather thong, I was rock solid & she was out in the open & I had a great sight picture. My buddy shot her with the range finder & whispered 168 yds. I held some front sight & hit her through both lungs, blood went everywhere & she ran about 30 yds down hill & dropped. I also have a photo of the lungs but no need to show it.

http://i84.photobucket.com/albums/k3/6shot_01/100_1054-10.jpg (http://s84.photobucket.com/user/6shot_01/media/100_1054-10.jpg.html)

Dick

[pworley1]

Nice work.

[NyFirefighter357]

Nice shooting. I know guys that couldn't make that shot with a heat seeking missile.

[sixshot]

Making that shot doesn't make me a great shooter, what made that possible was that perfect background, the sight picture was amazing & I practice all the time.
But, put her in the brush at half that distance & I would pass on the shot, just too risky. With iron sights it's all about sight picture & I had a great one with that all white background. It looked like I could reach out & touch her.

Dick

[winelover]

I have the mate to the second one in the photo. Don't know why Boyd's discontinued them.

Winelover

[redhawk0]

Beautiful animal...nice shooting....It must be nice to have the meat in the freezer too. But the best part...is the memory.

congrats

redhawk

[Ramjet-SS]

Walking sticks this inspires me I have two pieces of 1.5" lodge pole pine from Idaho some 10 years ago time to get to work on these and turn them into a walking stick.

[lightman]

Walking sticks are cool! And yours look great! I'm going to get a custom one someday but for now mine is a grubbing hoe handle. It works! Nice shot on the Elk too!

[Ole Joe Clarke]

I'm gonna buy one at the Fiddler's Convention in October, seems like the guy sells them in cedar and oak. I've been threatening to for years.

Have a blessed day,

Leon

[Uncle Grinch]

Nice walking stick there!

I have made quite a few also. My grandkids like them when we visit the state parks. The gift shops carry little badges that attach to their sticks. Most of mine are made from crepe myrtle limbs that often have a knot where they were trimmed and grew back. Crepe myrtle appears to be a very hard wood after it drys. I’ve tried various types of tips, from rubber to a short section of copper pipe fitted to the tip and pinned.

[Silvercreek Farmer]

Making that shot doesn't make me a great shooter, what made that possible was that perfect background, the sight picture was amazing & I practice all the time.
But, put her in the brush at half that distance & I would pass on the shot, just too risky. With iron sights it's all about sight picture & I had a great one with that all white background. It looked like I could reach out & touch her.

Dick

How true!

[RonT]

OK, since you started it.... Osage Orange, tip cast with JB Weld and Copper wire.
Cheers,
R
https://s33.postimg.cc/57eqly9x7/WS_1.jpg (https://postimg.cc/image/57eqly9x7/)
https://s33.postimg.cc/ynuco23cb/WS_2.jpg (https://postimg.cc/image/ynuco23cb/)

[clintsfolly]

Ok I have to have one now! Am taking off for a few weeks but when I get back I will get started. Think I still have a Ash log out back that I can Reave a few billets out of. This will get the grain going as long as possible. Turn them in the chair makers lathe with Rounders. If I am making one might as well make a batch!

[sixshot]

Also, if you're going to use them for shooting like I do & you're on flat ground then make a second hole for a second loop a little less than half way down. That way you can sit down & it will be just right for getting your left wrist through the sling & having a solid shooting rest, works great.

Dick

[clintsfolly]

Ok if I put it on the right hand as I am left handed? About how big is the dia at the top and bottom?

[Tripplebeards]

Boyd's needs to bring them back along with the ruger carbine stocks!

[woodbutcher]

:-D Wow.Those are very nice.Used to be a older Gentleman that my family knew that made all kinds of canes and walking sticks.Some were just display works of art,and others were actual working models.
Good luck.Have fun.Be safe.
Leo

[Texas by God]

Mein alpenstock made from a Mesquite limb banded at the tip with copper. The little nub is for pushing down fence wire. It's amazingly strong for its slenderness; I've whacked a cow or two with it when they wouldn't moove.https://uploads.tapatalk-cdn.com/20180904/ec80a4063186020f7573d98ec9225c4e.jpg

Sent from my SAMSUNG-SM-G930A using Tapatalk

[TCLouis]

Mine are typically Cedar or Hickory.
Osage Orange would make a good one.

Hmmm Wonder how long it would take to get it dried out. Guess I will be looking up for appropriate sized limb.
Surely it will be dry enough by spring.

[MT Gianni]

Walking sticks this inspires me I have two pieces of 1.5" lodge pole pine from Idaho some 10 years ago time to get to work on these and turn them into a walking stick.

Lodgepole isn't the strongest wood around. If it were me I would rub some kind of epoxy finish across it when you have it close.

[Wayne Smith]

Guys, take a look at the cane supplies Treeline.com has. I've used their ends for years.