canuck4570
08-18-2018, 09:48 AM
my bullet are size .460 and when loaded the outside diameter of the case is .483
according to specs I am at maximum and the case don't feed they jam about 3/4 inches left to go in.
does that mean I have a tight chamber or I have neck thickening ( is it possible on straight case?
if so is the outside neck turning is recommended or inside neck chamfering
the thickness of the wall are .0013 to 0015 depending on the case
according to specs I am at maximum and the case don't feed they jam about 3/4 inches left to go in.
does that mean I have a tight chamber or I have neck thickening ( is it possible on straight case?
if so is the outside neck turning is recommended or inside neck chamfering
the thickness of the wall are .0013 to 0015 depending on the case