Slippery 9MM boolit loads

[Jimlakeside]

I use Vihtavuori N320 (fast burning) and N340 (Medium burning) powders. N320 has the same burn rate as W231 or Alliant Red Dot and N340 has the same burn rate as Accurate No. 5 and Alliant Herco.

Any one loading the Slippery 9MM in any of these powders and if so what is you load data. Thanks.

Jim

[deltaenterprizes]

What is a "Slippery 9MM"? You need to give a bullet construction and bullet weight.

Be very careful about seating depth, make sure they are a maximun overall length.
The 9MM works at pressures at over 30,000 psi and a seating depth of as little as .030 can cause a significant pressure rise to dangerous levels,don't ask me how I know!

[cohutt]

What is a "Slippery 9MM"? You need to give a bullet construction and bullet weight.

Be very careful about seating depth, make sure they are a maximun overall length.
The 9MM works at pressures at over 30,000 psi and a seating depth of as little as .030 can cause a significant pressure rise to dangerous levels,don't ask me how I know!



Slippery 9mm (http://castboolits.gunloads.com/showthread.php?t=20249)

:coffee:

[hedgehorn]

I like it!

[38-55]

Jim,
I'm loading mine over 4.5 of unique if that helps out any.. My high power loves em'. The ruger isn't as happy with it or I'm just not shooting it well.. MMA did a good job o this one !
Calvin
Ps mine weigh in right at 136 gn, spg lube, sized to .356 from .360-.359