Who Makes....?

[enfieldphile]

Who makes a LONG Cast boolit mold (.314) for the .303 British?

Seems like the leade is very long on thses guns. If you get a boolit pressed into the rifling, all that's left in the case neck is the gas check! :confused:

Thanks in advance guys....

:castmine:

[Bent Ramrod]

The Lyman 314299 (used to be 311299) at 202 gr or so is probably what you are looking for. It's mostly nose, with only a small groove-diameter part to go in the shell.

[shooter93]

Try the mold maker in Australia...CBE I think it is. He has a number for 303 and just introduced a new one. His mold are very well made and shipping one here isn't bad at all.

[sav300]

CBE =www.castbulletengineering.bigpondhosting.com/ Hope that works.CBE has some good 303 boolit moulds.

[Maven]

CBE/Jim Allison is THE man to see for .303 and other oversized molds. Excellent workmanship and reasonable prices.

[JeffinNZ]

Maven is a very astute man (even though he passed through Christchurch NZ and never told me..........:-D[smilie=1:

Try this CBE. 316 240. 238gr in WW. Shoots like you would not believe. My No4 MkII at 50m with the first test load. There is 3 shots in that group.

http://img.photobucket.com/albums/v505/JeffinNZ/Shooting%20stuff/IMG_0111.jpg