Looking for bullet mold...

[connortn]

I've kind of been looking for a bullet mold for a "38 caliber 145gr Lead Semi Wad Cutter with Hollow Point". Don't know if it's permissible to post a link here but GT Bullets sells a bullet that is what I'm looking for in a mold. You can type in the description above in Google and it should show up as the first or second site. I've looked around for a mold that produces this bullet but so far have not been successful. If anyone has some leads, I would appreciate it.

Tks...

[tazman]

NOE makes a similar mold but it doesn't have the second crimp groove. 360-152-SWC-V5 is the name. The following link is for a two cavity mold. Molds with more cavities are available.
http://noebulletmolds.com/NV/product_info.php?cPath=35_318&products_id=192&osCsid=b3lj07evu1342m928v6kimle06

[RED BEAR]

it was my understanding most mold makers will not copy someone else's bullet. if you find one that will i would appreciate leting me know who i would love to have one for the original 38 hydra shok. it was 130 gr semi wad cutter with the hydra shok hollow point. good hunting.

[Adam20]

Email the mold makers, they will copy anything
They have all cloned the rcbs and Lyman stuff why have ethics now

You can send a sample bullet and have mold cut from the custom makers

[skeettx]

This it??

http://www.gtbullets.com/index.php?main_page=product_info&cPath=3&products_id=10&zenid=tidpnjnlka0hq118m972t7n3b6

This mold?
http://www.hensleygibbs.com/Design135.htm

And the Lyman 358156 could be hollowpointed

http://www.castpics.net/subsite2/ByCaliber/Bare%20Bottomed%20358156HP.pdf

Mike

[Rcmaveric]

Email the mold makers, they will copy anything
They have all cloned the rcbs and Lyman stuff why have ethics now

You can send a sample bullet and have mold cut from the custom makers

Thanks.... made me laugh and just spit tea out of my nose and all over my reloading bench.