ACTIVE?: Mihec .432/.434 Full Wadcutter PB/ GC 260gr -Cramer HP and Solid

[bluejay75]

Mihec .432/.434 Full Wadcutter PB ONLY 260gr -Cramer HP and Solid

Click to expand. 44 will run and close, then the 358, 45 and lastly...the 41.

222897

222878


This buy is now closed. Please check your orders and be patient while waiting for invoices to be sent. He has had the cherry to cut this for a month or two. The wait will be pins and assembly.


This one will remain in Group Buy Discussions until we hit 12 commitments. We need 25 to put it into last call.

This one is currently being designed! When complete…it will be as pictured in and ready for self defense, close range hunting/ finishing game, small game and target applications This is a Boolit design is the go to Boolit will function well for 44 Special/ Magnum and 444 Marlin Single Shots. If youre expecting good function in a Levergun…this is not the Boolit. This is for max diameter for 44 caliber.
Weights are lubed and gas checked, ready to load. 260 gr. solid, 245-255 gr. hollow point.

Would be available in 2 and 4 Cavity Cramer HP, 4-cav Solid Brass, or 6-cav Solid Aluminum. (Choose PB ONLY)

Small, Large and Blank Hollow Point Pins available. Im going to ask for a shallow penta for this one.

It needs 10 buyers to commit to this thread before it goes active, and 20 buyers gets Miha cutting molds. Once the cherry is cut...It cuts all 4.

Features:

- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Weights, ready to load:

Solid 245 gr PB 215-235 HP


Diameters:
.432 or .434

Prices are without shipping. Shipping rates vary.
- 2 Cavity Hollow Point Brass - 95 Euro's (80,75 Euros with discount)????? NEED TO CONFIRM
- 4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
- 4 Cavity solid Brass 95 Euro's (80,75 Euros with discount)
- 6 Cavity solid Aluminum 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your info in the following way: (user name) (disguised email) (type of mold) (zip code)

2 cavity HP (PB)
1)mjones23atnebdotrrdotcom- -HP- 0.432- 2 cavity PB
2)jtcarm at charter dot net- -HP- 0.432- 2 cavity PB
3)HHWADKINSIII at aol dot com-HP- 0.432- 2 cavity PB- 31721
4)dan eschner AT gmail DOT com -HP- 0.432- 2 cavity PB
5)kahngr at potsdam dot edu -HP- 0.432- 2 cavity PB+ SET OF HANDLES zip is 13676
6)figelskiatyahoodotcom- -HP- 0.432- 2 cavity PB
7)Rocpyro at gmail dot com -HP- 0.432- 2 cavity PB
8)
9)
10)

4 cavity HP (PB)
1)petander (attic) gmail dot com- -HP- 0.432- 4 cavity PB-NLG- NO LUBE GROOVES- with handles
2)webb (a) teamWebb (d) net - 0.434- 4 cavity PB
3) j _ Bownes at yahoo dot com-HP- 0.434- 4 cavity PB
4)vfluckey at midco dot net -HP- 0.432- 4 cavity PB 57110- DHL
5)JoeGravelle at hotmail dot com-HP- 0.432- 2 cavity PB
6)rwhyte at wi dot rr dot com-HP- 0.432- 4 cavity PB-53120
7)william dot kinderknecht at gmail dot com-HP- 0.432- 4 cavity PB+ SET OF HANDLES
8)gspatton at gttransmissions dot com-HP- 0.434- 4 cavity PB
9)gamsek AT iCloud DOT com -HP- 0.432- 4 cavity PB
10)krflff2atdejazzddotcom -HP- 0.432- 2 cavity PB
11)reddhawkk eagle-rainATcoxDOTnet-HP- 0.432- 2 cavity PB- 06096
12)evoevil...at...aol...dot ...com zip -HP- 0.432- 4 cavity PB- 20705
13)twgrubb3 at Gmail dot com-HP- 0.432- 4 cavity PB- with handles
14)mjcrookstonatmsndotcom-HP- 0.432- 4 cavity PB- with handles
15)pdevers at aol dott com-HP- 0.434- 4 cavity PB- with handles
16)boo-haaa athot maildotcom-HP- 0.434- 4 cavity PB-
17)
18)
19)
20)


4 cavity Solid, Brass mold with (PB)
1) redhawk357magATgmail.com- SOLID- 0.432- 4 cavity PB
2)
3)
4)
5)
6)

6 cavity Solid, Aluminum mold with (PB)
1) boo-haaa athot maildotcom - SOLID- 0.434- 6 cavity PB
2)
3)
4)
5)
6)

[Beagle333]

I think my Pug would enjoy this one.....

4-Cav, HP, PB, .434 please.
shutupandjump at yahoo dot com

[Plan_IX]

I'm in 4 cav, plain base, all pins .434 dia
webb (a) teamWebb (d) net

[bluejay75]

I'm in 4 can, pb hp pins

Need your disguised email and diameter.

[tradbear55]

I'm in for a 4 cav, HP, GC, .432 all pins.
blewrench 75 at g mail dot com

[bluejay75]

Lets discuss pin Options.....I want a shallow Penta for this one. Imagine the normal sized penta pin cropped off to a flat in the center. Will still expand but not break apart. Oreo has made a similar pin in the past.

Your thoughts.

[bluejay75]

I'm in for a 4 cav, HP, GC, .432 all pins.
blewrench 75 at g mail dot com

BLUEwrench??? Correct?

[tradbear55]

Sorry, correct. bluewrench.

[tradbear55]

I like the idea of a shallow penta. Would rather have expansion and more weight than have it break apart.

[bluejay75]

Taken care of gents. 45.2.1 agreed to do this design so we will have some flexibility in the finished product.

I vote for 250 grains as a PB Solid. Should get it down to 235 with the biggest hollow point. Anyone else?

[bluejay75]

Official drawing. This should be THE self defense boolit of choice!

If someone can figure out how to make the photo bigger please post.

[tradbear55]

Must bow out, only in if its available in a gc design. Thanks.

[bluejay75]

I understand. Thanks.

[bluejay75]

Im going to ask him to make the mid size pin the shallow penta and narrow the HP to leave a little more meat on the Boolit and a little more weight What does the group think?

[thraxx]

I'm going to bite on this one.

thraxx - vfluckey at midco dot net - 4 cav. HP, .423 - 57110

[Jtarm]

Is there any history behind this design, i.e. does anyone know how stable the boolit would be?

[bluejay75]

Is there any history behind this design, i.e. does anyone know how stable the boolit would be?

I shoot this boolit in an NOE design and in bought boolits from a member here (MAtts Bullets...great Boolits BTW).

It is stable with a full charge of 231@1400 FPS from a carbine and ragged hole accurate out to 50 yards. Still looking like a group at 75 yards and barely holding to a paper plate at 100. For the purpose of close in SPLATTTTT!!!!! it suits the purpose well. All pistol self defense ranges and varminting camp range from a rifle.

[thraxx]

I'd like to add the DHL shipping to my order. thanks!

[thraxx]

bump.

because I'd really like to see this one made!

[thraxx]

bump again.

[bluejay75]

Thraxx... these are all cut from the same cherry. I’m going to try to run the 358 FWC and see if I can get 25. Then I will come back and grab this one. Next week.

[thraxx]

Thraxx... these are all cut from the same cherry. I’m going to try to run the 358 FWC and see if I can get 25. Then I will come back and grab this one. Next week.

ok, I didn't know those were all from the same cherry. I just didn't want this one to fade out. I'm interested in the .45, too.

[Law.man]

I'll play...4 cav HP .432 AND a set of handles. I like the idea of shallow penta pin.

worgen(dot)wiki(at)gmail(dot)com

[Law.man]

Come on guys, let's show some love for this bad boy!

[bluejay75]

My NOE version turned a yearling does head to mush...FYI. @1400 FPS

[Beagle333]

Run it, run it! [smilie=s:

[phaessler]

Going broke with all this fun stuff....Thank you

pdhaessler618 at gmail dot com - 2 Cavity HP Brass

[phaessler]

Is this a dead buy?

[thraxx]

I hope not. I know Mr. Bluejay was talking about taking a break from honcho-ing on another buy, so I dont know what will happen to this one.

Hopefully he stops by and lets us know.

[phaessler]

I would assume its all done....

[bluejay75]

I thought this one would go the distance....you just never know sometimes.

[Jtarm]

Ok, put me down for a 2-cavity HP brass .432.

jtcarm at charter dot net.

BTW, make that the small HP.

[bowfin]

Please put me down for a 2 cavity Hollow Point Brass mold

mjones23atnebdotrrdotcom.

[thraxx]

There's 3 names missing from the list... we just need a few more.

[RedHawk357Mag]

Four cavity, brass, PB, .432" SOLID.
redhawk357magATgmail.com
Thank you.

Sent from my XT1650 using Tapatalk

[bluejay75]

Just a few more and this one goes live. Great thing is it only takes one cherry to cut all calibers.

[thraxx]

Just a few more and this one goes live. Great thing is it only takes one cherry to cut all calibers.

How do I get the .454 version as well?

[Jtarm]

Cmon, 2 more and we move up to the big leagues.

[bluejay75]

MIHEC says this can run at 20 total because they are all off the same Cherry. This is now active.

[Law.man]

Please change mine to 4cav solid .432, no handles (worgen(dot)wiki(at)gmail(dot)com).

Thanks!

[mart]

Shoot, you better count me in for a 4 cavity HP mold. If my wife knew how much I've spent on MP molds over the last several years she'd have a cow. Of course I'll have to get one in each of the calibers as they become available. It never ends.

marty dot weatherup at yahoo dot com

[Law.man]

Hello Bulejay, I hate to be that guy, but can you scratch me off this one (for now) please? Something has come up and the cash is needed elsewhere...I don't wanna commit to something unless I know I got the money safely set aside.

[ohnomrbillk]

4 cavity HP (PB)
william dot kinderknecht at gmail dot com-HP- 0.432- 4 cavity PB+ SET OF HANDLES

[bluejay75]

4 cavity HP (PB)
william dot kinderknecht at gmail dot com-HP- 0.432- 4 cavity PB+ SET OF HANDLES

Got you down Mr. K.

We are inching closer to finishing this one. Miha agreed to run it at 20. Im sure the HP pins for the 44 and 45 will be the same so I will ask him to order for both sizes. Look at this like an Ogival Wadcutter that bore rides. Should be a good one.

[Dr-Greg]

Vote to re-instate 45.2.1 ? What happened to him?

[phaessler]

bluejay75, please edit my email to " haesslerpd618 AT gmail DOT com" thank you very much.

[gtgeorge]

gspatton at gttransmissions dot com-HP- 0.434- 4 cavity PB

[Gamsek]

Gamsek

gamsek AT iCloud DOT com

4cavity brass PB HP, .432”

[dkf]

krflff2atdejazzddotcom -HP- 0.432- 2 cavity PB

[midnight]

I'm in for a: four cavity HP PB all pins, .432 rwhyte at wi dot rr dot com

My handle here is midnight. The instructions say zip code so even though no one else has given one, here it is: 53120.

[alamogunr]

Put me down for one 2 Cavity Hollow Point Brass. I'm assuming that I will be able to cast solid also.

alamogunr AT charter DOT net

[mart]

better drop me off this on. I'm getting packed up to move and found 44 molds I haven't even used yet. Need to use the ones I've got. Thanks. marty dot weatherup AT yahoo dot com

[JoeG52]

Put me down for one: 4 cavity HP PB all pins .432 JoeGravelle at hotmail dot com

[phaessler]

Please remove me from this buy.

haesslerpd618 AT gmail DOT com

Thank you

[reddhawkk]

reddhawkk eagle-rainATcoxDOTnet HP 2-cavity 0.432 06096

[JoeG52]

Please change this to 2 cavity instead of 4.
5)JoeGravelle at hotmail dot com-HP- 0.432- 4 cavity PB

[bluejay75]

Please change this to 2 cavity instead of 4.
5)JoeGravelle at hotmail dot com-HP- 0.432- 4 cavity PB

DOne sir...

[big bore nut]

I'll take a 2 cavity H P .434 dia if available. Big Bore Nut greggoryashley at yahoo dot com

[JoeG52]

There has to be at least 20 more boolit casters that need this mold !

[evoevil]

4 cavity HP PB all pins .432 evoevil...at...aol...dot ...com zip 20705

[oldhenry]

I'm in: oldhenry, HHWADKINSIII at aol dot com, 2 cav. brass HP, PB, .432 preferred, all pins (shallow penta), 31721

Thanks,
Henry

[glockky]

twgrubb3@ Gmail dot com . 4 cavity HP .432” all pins with handles

[bluejay75]

Good choice. Got you added.

[oldhenry]

I notice that I'm not on the list. Please check post #61 & get me added.

Thanks,
Henry

[alamogunr]

Please remove me from the 2 Cavity HP PB list:
3)alamogunr AT charter DOT net -HP- 0.432- 2 cavity PB

I've got too many irons in the fire.

[bluejay75]

I notice that I'm not on the list. Please check post #61 & get me added.

Thanks,
Henry

Sorry sir. As soon as I can get to a computer I got you fixed up.

[ldmcrook]

I "need" one!
ldmcrook
mjcrookstonatmsndotcom
4 cav 0.432 with all pins and handles
Thanks!

[bluejay75]

Checking to see if its time to close this one. Thanks for all the support Gents!!!

[JoeG52]

Is this ready for production?

[bluejay75]

We are where we need to be. Just waiting for the nod to close. Trying to let the 300 BO late adds get cut and shipped.

[georgerkahn]

I will be privileged to purchase/be added to list of:
kahngr at potsdam dot edu (1) HP 2-cavity brass HP .432 with (1) set of handles; zip is 13676
georgerkahn

[bluejay75]

I will be privileged to purchase/be added to list of:
kahngr at potsdam dot edu (1) HP 2-cavity brass HP .432 with (1) set of handles; zip is 13676
georgerkahn

Let me get off the road and I will gladly add you.

[Petander]

Hello,

would NLG be possible?

If so,I'm in for a four cav brass mold.

Thank you.

[bluejay75]

Hello,

would NLG be possible?

If so,I'm in for a four cav brass mold.

Thank you.

Email please?

[tomme boy]

Don't you think you need to tell everyone that SHIPPING IS NOT INCLUDED! And they will be charged an extra $17.50 or more to the price?

[glockky]

Don't you think you need to tell everyone that SHIPPING IS NOT INCLUDED! And they will be charged an extra $17.50 or more to the price?

I agree 100% we are getting raped on shipping.

[alamogunr]

I agree 100% we are getting raped on shipping.

Can't have it both ways. First we waited without knowing where our mold was and not knowing when and if it would be delivered. Now we know these things and pay the going rate for information and warm fuzzy feelings.

Some would suggest that we have the option to choose shipping method. That would put a greater burden on Miha to keep another variable straight.

In many years of participating in GB's, I've only lost two molds in shipping. These were the same mold in a GB for a Lee mold. Back then Lee sent all molds to the Honcho and he took responsibility for packing and shipping. Knowing the effort that took meant that most of us were very understanding of problems that arose.

[tomme boy]

The problem is he will NOT address the shipping charge. It CLEARLY states shipping is included in the prices. So he has already factored in the amount of shipping for that price that was given. Now he is charging extra for shipping without addressing the cost in the first price. THAT IS FRAUD! The honcho needs to change the price in the terms of all the GB's that are going on.

[bluejay75]

The problem is he will NOT address the shipping charge. It CLEARLY states shipping is included in the prices. So he has already factored in the amount of shipping for that price that was given. Now he is charging extra for shipping without addressing the cost in the first price. THAT IS FRAUD! The honcho needs to change the price in the terms of all the GB's that are going on.

No problem changing it. Some group buys are older than others. When GB started it was correct. Thanks for pointing out the change in shipping.

But if you don’t want the mold due to this you are free not to participate.

[dkf]

Please remove me from this buy. Post #49 Thank You

[bpatterson84]

Repeat post.

[bpatterson84]

I’d like to get in on this one.

rocpyro at gmail, 432 pb 2 hole HP with handles. Zip 76116.

[ddixie884]

I would vote to ri-instate the man but this is not a democracy.........................

[Beagle333]

Turn it out. I'm in. Lets do this thing. :D

[JPD]

If possible, please put me down for:

4cavity brass PB HP, .434 with handles

pdevers at aol dott com

[georgerkahn]

Turn it out. I'm in. Lets do this thing. :D

As Beagle333 suggested -- it will shortly be a full year since this awesome mould design was listed here! Not a "clone" or copy of someone else's design, this looks like a boolit which will be a winner on many levels. OP/Honcho indicated twenty-five need be on the production list, and there were 20, with :) JPD adding a "want" this morning bringing number to 21! ONLY four more are needed?
I reckoned a 'bump' may hopefully help get to requisite minimum, while frankly cannot believe it was not attained but a very few days after listing.
geo

[JoeG52]

As Beagle333 suggested -- it will shortly be a full year since this awesome mould design was listed here! Not a "clone" or copy of someone else's design, this looks like a boolit which will be a winner on many levels. OP/Honcho indicated twenty-five need be on the production list, and there were 20, with :) JPD adding a "want" this morning bringing number to 21! ONLY four more are needed?
I reckoned a 'bump' may hopefully help get to requisite minimum, while frankly cannot believe it was not attained but a very few days after listing.
geo

I don't see the request from post #82 in the list. That would make it 22. Maybe only three more needed?

[Markopolo]

i will climb in....

figelskiatyahoodotcom

432 2 cav HP brass all pins.....

thanks Bluejay

[evoevil]

Any movement on this one

[bushog]

Please add me for:

One 4 cavity HP, .434

and

One 6 cavity PB, .434

Bushog
boo-haaa athot maildotcom
87544

Thanks!

[JoeG52]

That should make it 25, let's get it done!

[bluejay75]

Yes sir.

[bpatterson84]

I’m still not on the list. 2 cavity, 432, HP, PB.
Rocpyro at gmail. This one looks awesome!!!

[bpatterson84]

Would really like to see this mold become reality! I was just thinking the other day about the combination of this boolit and the Smith and Wesson model 69, the short version, the 2.75 one, would make quite a self defense pair. I know there's a huge backlog, and I don't mind waiting for these fine molds, just don't want to see this one fall off!

[oldhenry]

If my math is correct:
20 on the list
- 1 requested to be removed (still on list)
+5 requested to be on list, but not listed
----------
24
We need 1 more

[DanInCt]

daninct - dan eschner AT gmail DOT com - HP- 0.432- 2 cavity + pins PB - 06791

I pm'd too incase you needed on the thread

[bluejay75]

I will clean up this buy and request it be closed in the AM. This one cherry cuts all other diameters. Thanks guys.

[DanInCt]

any news on this guy?

[Petander]

Did this one ever happen?

I'd love one of these.

[DanInCt]

Did this one ever happen?

I'd love one of these.

I havent heard anything

[bluejay75]

Got an email out to Miha. Will let you know when I know. Please be patient.

[DanInCt]

Got an email out to Miha. Will let you know when I know. Please be patient.

Did you get me on this buy? The list doesn't reflect it. Just wanted to make sure i get in on this.
Thanks

[oldhenry]

I count 20 on list & DanInCt isn't on list. That means 4 others aren't on it either.

[bluejay75]

Buy is closed...but you can still place orders.

[Petander]

Buy is closed...but you can still place orders.

Great!

- 4 Cavity Hollow Point Brass PB.432", NLG if possible. Plus MP handles.

petander (attic) gmail donut com.


Thank you very much

EDIT added PB

[midnight]

Just to keep this thread active. It closed on 11-11-20 so we are just waiting on Miha.

Bob

[big bore nut]

Please take me off the list.

[JoeG52]

Keeping it active. Any news?

[bluejay75]

Keeping it active. Any news?

As with all manufacturers in the shooting Industry he is flooded at the moment. I appreciate your patience here. As you have seen. No GB orders have been filled by any manufacturer in months. They are barely keeping up with the new flood of casters.

[harm]

Been waiting on this one to close and the .38 and .45 options on the group buy to come available.. manufacturers all have their hands full. Any chance the next group buys could be started while we wait?

[bluejay75]

Been waiting on this one to close and the .38 and .45 options on the group buy to come available.. manufacturers all have their hands full. Any chance the next group buys could be started while we wait?

Excellent point. I’m waiting for this rush to clear before posting new. But based on your comment I will build them and put them into discussion.

[bluejay75]

Since these are being slow to cut. I asked that this one be moved back to active.

[bpatterson84]

I sure am excited to hopefully see this one. Not sure if the email is case sensitive, but on the 2 cavity list, Rocpyro should be rocpyro. Thank you!

[harm]

Still looking forward to this. Darn those supply chain snags.

[midnight]

Bluejay : please remove me from this buy. I have reached an age where I am beginning to sell my vast accumulation of molds so I don't need to be buying more. rwhyte at wi dot rr dot com

Bob