View Full Version : Mould Recommendation
WALLNUTT
06-22-2018, 07:06 PM
Mould recommendation for 45 Colt lever action(Rossi)?
pworley1
06-22-2018, 07:09 PM
The lyman 454190 works good in mine.
marlin39a
06-22-2018, 07:20 PM
454190 does work, but has no crimp groove. Find the OAL, and use a Lee FCD to crimp into the boolet
sghart3578
06-22-2018, 07:38 PM
Mine loves the Lee 452-255 as cast, no sizing. My mold drops them right at .453-.454". I tumble lube them with 1 light coat of BLL.
With the slow twist rate you would think that you would have to push them really hard. But when I was working out my loads I got a pleasant surprise.
The same load of 8.5 gr of Unique that I use in my Vaquero and my Blackhawk is deadly accurate in the Rossi. I have never chrono'ed them out of the Rossi but my guess would be 1100-1200 fps.
And one more that surprised me. I have loaded 8-8.5 gr of Unique as a standard load for a long time. But I have a load that is even more accurate though not by much.
The same Lee 255 gr bullet over 7.5 gr of Bullseye. What a great combo.
Best of luck,
Steve in N CA
Jeff Michel
06-23-2018, 06:22 AM
I second the Lee 452-255. If your hunting deer, the NOE 280 grain WFN is tough to beat as well.
Silver Jack Hammer
06-27-2018, 08:28 AM
454190 is not recommended for tubular magazines. I cast a lot of 454190 for revolvers.
John Boy
06-27-2018, 11:32 AM
Ideal 454190 or Accurate 4X clone of 45410, 255gr RNFP
222760
Is the regular standard .45 Colt's. (PB, 255 - TP is 190)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.