PDA

View Full Version : grips needed



toot
06-21-2018, 12:16 PM
i was shooting my COLT MOD 1911 A-1 and both grips broke where the top screws hold them on. i tried to glue them, no luck. does any one have two of them either wood or the Bakelite ones, any condition? if so please let me know, thank you.

jcren
06-21-2018, 02:19 PM
I only have a set of stock RIA black rubber take-offs, but https://www.altamontco.com/pistol-grips/1911-government/classic/ has some very nice basic rosewood starting at $35.

Jake McCracken
06-21-2018, 07:33 PM
I have a pair of stock Taurus ones somewhere. They are checkered black plastic. If I can locate them they are yours. Free...

The key is "if I can find them". I will look this weekend.

Sent from my SM-G960U using Tapatalk

skeettx
06-21-2018, 08:18 PM
Pachmayer rubber grips OK??

P.S. Well George must have been here :)
I looked for them and they are GONE
Mike

toot
06-21-2018, 11:15 PM
skeettx, yes he has a way of doing those things. thank's toot.

toot
06-22-2018, 07:38 AM
i want to thank all who responded to my need. this is a great site and even a greater bunch of guys.

Jake McCracken
06-22-2018, 10:49 AM
I have a pair of stock Taurus ones somewhere. They are checkered black plastic. If I can locate them they are yours. Free...

The key is "if I can find them". I will look this weekend.

Sent from my SM-G960U using TapatalkOk. Bad news... I searched everywhere when I got home from work this morning and I can not seem to find them. Not suprising since last I saw them was 10yrs ago or so. Sorry if I got your hopes up.

If I do come across them I'll PM ya.

Sent from my SM-G960U using Tapatalk

BrassMagnet
06-22-2018, 11:13 AM
That darn George probably snatched a set for you already, but if he loses your address I probably can find a set.

EMC45
06-22-2018, 11:17 AM
I also have a set of all black "plastic" ones.

Der Gebirgsjager
06-22-2018, 02:14 PM
I don't read a completed offer/acceptance here. If you still need a pair PM me your mailing address and I'll get a set out to you. I probably have a couple of dozen sets put away in a box, and at present there's a set of smooth wooden grips off an RIA 1911 lying on my workbench that haven't made it into the box yet.

skeettx
06-22-2018, 02:59 PM
Yeee Hawww
Fine gesture :)
Mike

toot
06-22-2018, 03:28 PM
hey guys i am all set. i can't be-leave the response to my request. this is the best bunch of friends any one could want. than's.

Bazoo
06-23-2018, 12:26 AM
I sure could use a decent set of grips for my springfield. My grips didnt break, but the checkering is worn off in a few spots cause I been carrying it for 6 years straight.

skeettx
06-23-2018, 08:21 AM
O3 or O3A3 :) ???