Want 44 Wadcutter

[Drm50]

Looking to buy or trade for 100 unsized Lyman/Ideal #429352 245gr Wadcutters. I have #429348 173gr mold and want to try heavier bullet in S&W m24 & m29. I might
be interested in similar bullet from other mold makers. Not interested in bullets from
Lee molds. Only those with well defined and square edged grease grooves.

[bobthenailer]

I have the Saeco #944- 200 gr wc already lubed & sized @430 dia .
If you want raw bullets I would have to cast some as I L&S right after casting a batch

[Drm50]

I want them raw. Would buy a hundred or trade you out of some when you cast some up. Have
several 38-41-44-45 pistol bullets and 25/20 Hp , 32/20 FN raw. I never lube and size till ready
to load.

[Lee S. Forsberg]

I cast H&G 107B that is 185gr wadcutter 44 cal. PB.

[Ohio Rusty]

I have the Lee 208 grain wadcutter mould. I could cast you some to try.

Ohio Rusty ><>

[BK7saum]

I have the MP 44 HBWC mold. Supposed to cast 213gr as HB and 248gr as solid.

I dont have any cast at the moment, but if you want to try some at a later date let me know.

[Hardcast416taylor]

I have the Saeco #420 mold that drops roughly a 200 gr. WC and an old LEE 208 gr. WC nicknamed `the flying trashcan`. Both shoot very well from my Rugers and S&W M 29 using 50/50 alloy.Robert