Tom W.
05-24-2018, 11:02 AM
I have an old s/c Lee mold that I bought in the late '70s. It has pins that hold the blocks to the handles, and when it gets good and hot, the pins try to escape. They haven't fallen out all of the way yet, but it sure is annoying, and pushing them back in and tapping with a punch only helps for a short while. I thought about threading the holes and putting in bolts, but wondered if the same thing would happen, the blocks get hot and the bolts working themselves out. I also thought about punching the holes a bit to close them up a bit, but wondered if I might damage the mold itself doing that.[smilie=1: I know it's just a cheap Lee, but it has served me well....and is an accurate boolit.
Sorry. I made this post in molds, Please delete this one.
Tom
Sorry. I made this post in molds, Please delete this one.
Tom