Fat 9MM Makarov Boolits

[brewer12345]

I am about to start loading for my Mak and I have some jacketed projectiles to experiment with, but ultimately I would like to buy a mold and shoot cast. I have slugged the barrel and it came out at .3655-.366", so commercial cast at .365 probably won't work for me. Does anyone have some Mak boolits that are .367" or a little fatter that they would be willing to part with? Unsized/lubed would be fine if that is what you have. I can trade boolits (35 Rem, 30 caliber rifle, most any flavor of .358, etc.) or of course can make with the cash.

[brewer12345]

Grmps obliged me with some nice powder coated boolits. All set!

[poppy42]

Haven’t mic-ed them but I’ve put about 6000+ cast from the Lee 95 grn mold with no leading! As dropped. My Polish P64 requires them to be sized to .363 to feed properly. My Bulgarian Mak also shoots the .373 sized cast with no problems. I shoot a lot of Makarov feel free to pm me if you want to talk

[Outpost75]

Tom at Accurate also has several molds suitable for the 9x18 MAK.