Clark
05-20-2018, 12:34 AM
220722
I have been beating it up and modifying it [adding struts, knobs, and clamping feet for the bench vise to grab], and when the rear foam pads wore out, P3 sent me two pair for free.
First class product and first class service taking years of daily punishment.
What I did to damage the foam was turning barrelled actions in the vise side ways, clamping down, and then applying force. The sharp underbelly of some actions cut into the foam.
Here is the guy, but I got mine from Amazon
http://www.ctkprecision.com/p3-ultimate-gun-vise.aspx
I have been beating it up and modifying it [adding struts, knobs, and clamping feet for the bench vise to grab], and when the rear foam pads wore out, P3 sent me two pair for free.
First class product and first class service taking years of daily punishment.
What I did to damage the foam was turning barrelled actions in the vise side ways, clamping down, and then applying force. The sharp underbelly of some actions cut into the foam.
Here is the guy, but I got mine from Amazon
http://www.ctkprecision.com/p3-ultimate-gun-vise.aspx