WTB Measure drop tube for Belding and Mull

[whtsmoke]

Looking for a measure for the Belding and Mull measure, I can find them but everyone wants an arm and leg for them or I can make one. If you have one you arent using and would like to help a poor soul out let me know, Thanks.

[cbashooter]

Many of the brass powder measures for black powder guns will slide up in that and work just as The Originals do. You might want to go that route

[whtsmoke]

That was another thought.

[Buzzard II]

Belding and Mull is in Pennsylvania. I don't have their phone number but Google it. I bought 2 awhile back and they were reasonable. Good luck.
Bob

[whtsmoke]

Thanks Bob i sent them an email just yesterday.

[jbutts6785]

I bought one of these a while back. It works fine with my B&M measure.

http://montanavintagearms.com/product/reloading/micrometer-scale/

[mazo kid]

A Tedd Cash powder measure works fine and is inexpensive.

[floydboy]

I made a bunch out of old rifle brass. I think 45-70 fit the best. You can drill out the primer pocket, thread it and with a fine thread screw make an adjustable measure.

[38splpete]

I have an extra. It has a simple sliding plunger with a lock screw. You can have it for $10 plus shipping. I would think just a padded envelope would be abouttwo or three bucks.

[whtsmoke]

thanks for your offer 38splpete, neighbor was over and he said well lets go to his house and fire his metal lathe up, he mad one in no time at all. I don't know why I didn't think of him in the first place.

[whtsmoke]

Please close thread problem solved
Thank You.