PDA

View Full Version : wtb .432 44 hunting bullet



Outback32
05-17-2018, 01:55 AM
I'm wanting to reload some deer and hog boolits. I won't shoot enough to buy a mold. I'd like to buy 100 boolits I'm new to lead so I'm not sure what I need. if you have a bullet you like that works I'd be interested. if it helps il be shooting these in a ruger sbh. thanks

Walks
05-18-2018, 12:25 PM
I'm wanting to reload some deer and hog boolits. I won't shoot enough to buy a mold. I'd like to buy 100 boolits I'm new to lead so I'm not sure what I need. if you have a bullet you like that works I'd be interested. if it helps il be shooting these in a ruger sbh. thanks

Good Morning,

I can supply some .44 bullets. I have :
RCBS .44-240 SWC
LYMAN .44-245 SWC
LYMAN . 44-240 FP
LEE .44-310 FP Gas Check
N.O.E .44-240 RNFP

Will be glad to send you some in a small Priority mail box, I want to do it that way so as to protect them from damage during shipping. Will $10.00 including shipping be ok ? Depending on what you choose it make take 10 days before I can mail them out as I don't have all of them cast up at this time. I would favor the LYMAN 44-240 FP myself. Do you want them sized .429 or .430 ?

Rog

dh2
05-20-2018, 02:20 PM
you said .432 are you wanting to shoot them out of a 44 mag or 444Marlin? if you are looking for the 444Marlin PM me

Outback32
05-21-2018, 01:56 PM
44mag super blackhawk hunter

OFFSHORE
09-30-2018, 06:42 AM
44mag super blackhawk hunter

I have the same revolver and I have found a good boolit/load for mine. . .Accurate Mold 43-270G. I know this post is several months old, but if you're still in need let me know.

Lee S. Forsberg
10-01-2018, 02:42 AM
I have 44 bullets from 166 to 340 gr. What would you like?

buckwheatpaul
10-01-2018, 07:23 AM
I'm wanting to reload some deer and hog boolits. I won't shoot enough to buy a mold. I'd like to buy 100 boolits I'm new to lead so I'm not sure what I need. if you have a bullet you like that works I'd be interested. if it helps il be shooting these in a ruger sbh. thanks

Been buying 200gr rf from CASTING MACHINE.... They are sized .432 and coated....they shoot great with 10 gr. of Unique.......

tja6435
10-01-2018, 09:45 AM
I may have some .432-350-LFN bullets from a LBT mold I had commissioned, it has 2 crimp grooves and came in around 370gr with my alloy. They'll fit in my Redhawk and Super Blackhawk, the Blackhawk needs the bullet seated to the top crimp groove. Alliant 300-MP gives me an accurate load, but I'll be trying 296 when I get my reloading gear setup again, probably next spring.

RED BEAR
10-01-2018, 10:59 AM
where do you get a 432 sizing die for rcbs lubamatic?

phaessler
10-02-2018, 02:04 PM
where do you get a 432 sizing die for rcbs lubamatic?

https://www.buffaloarms.com/432-custom-bullet-sizing-die-for-lyman-rcbs-lubrisizers-bac432