PDA

View Full Version : 44 Special/44 Mag Wadcutter design based on the H&g 50 cherry



Wasalmonslayer
04-30-2018, 12:27 AM
Hello Gentleman take look at this design and let me know your thoughts please.
It seems as thou most of the interest is for HP this will be a different cherry.

The cherries to cut hb and hp are different the bullets are orientated in the mold either nose up for HB or nose down for HP

If HB gains enough interest we will run another buy for that. Miha already has a cherry for that one.
235853235854

Let’s set this one up as a hollow point design for now unless interest shifts a lot.

- 4 cavity HP with all the pins Brass
- 4 Cavity Solid Brass or 6 Cavity Aluminum with Lee style Sprue plate
- Spec your size .430 or .432 or .434
- Hi Tek is an option
- Handles can be added for 20 euro's normally 23 euro's
- DHL shipping is an option for this please attach your zip code for record keeping.

- Standard Pricing applies and group buy discount also applies.

- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

- 6 Cavity solid Brass 95 Euro's (80,75 with discount)
- 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)


4 Cavity Hp Brass List -

1) shutupandjump at yahoo dot com - 4 Cavity .434
2) sorgatz aT ameritech d0T net - .432 4-cav Brass HP (zip code 48442)
3) goodalloy maybe?
4) stubach maybe?
5) georgerkahn kahngr at potsdam dot edu - 4 Cavity HP .432 with handles
6) rd232d aT yahoo d0T com - 4 Cavity HP .432 and handles (zip code 98007)
7) vfluckey at midco dot net - 4-cav HP .432 (zip 57110) with DHL
8)


4 Cavity Brass / 6 Cavity Aluminum Solid -

1) max at yvmarine dot com - 6 Cavity Aluminum .432 zip (98903)
2) nueces maybe 2?
3) panshovel at live dot com -4 Cavity brass .430
4) jstahlconstruction at yahoo dot com - 4 Cavity Brass .432
5) mjcrookston at msn dot com - 4 Cavity Brass .432 (84095)
6) northcaster44 at outlook dot com - 4 Cavity Brass .432
7) mjones23ATnebDOTrrDOTcom - 4 Cavity Brass .432
8) BULLS underscore EYE underscore 264 AT hotmail DOT com - 6 Cavity Aluminum .432 (78665)

4 Cavity HP Hi Tek -

1)
2)
3)
4)
5)

4 Cavity Brass / 6 Cavity Aluminum Solid Hi Te

1)
2)
3)
4)
5)

Beagle333
04-30-2018, 01:11 AM
If it was an HP, I'd be in. It wouldn't need 4 different pins, just one thin HP pin. [smilie=s:
There's just something about an HP wadcutter that I like.

GoodAlloy
04-30-2018, 08:44 AM
If it was an HP, I'd be in. It wouldn't need 4 different pins, just one thin HP pin. [smilie=s:
There's just something about an HP wadcutter that I like.

I will 2nd that motion

Wasalmonslayer
04-30-2018, 08:53 AM
Nothing is set in stone we could switch it from hollow base to hollow point if you like.
Let me see about getting it drawn that way.

Thank you for the input guys

Nueces
04-30-2018, 11:58 AM
I'm interested in a 6 cavity solid. Maybe two of 'em.

StuBach
04-30-2018, 11:42 PM
Id be in for a 4 cavity hollow base.

Have an original HG 50 as well as Mihas HB clone and love them both so excited to try in 44.

Wasalmonslayer
05-01-2018, 12:33 AM
I just added the revised version with a hollow point.
The hollow point will require a new cherry for cutting the cavity his current hg 50 cherry is for base first in the cavity.
Maybe we could run this one in a hp version for 38/357 too :grin:

Thanks to lakehouse for the drawing work :drinks:

Wasalmonslayer
05-04-2018, 09:26 AM
So have you guys thought about this any more??

I see that Duke just threw up a hand full of wadcutter buys so this one may die now....

Please let me know your thoughts.

Thank you :)

Lakehouse2012
05-04-2018, 07:27 PM
I am in for an HP in 4cav!
So have you guys thought about this any more??

I see that Duke just threw up a hand full of wadcutter buys so this one may die now....

Please let me know your thoughts.

Thank you :)

I'm in for a 4-cav Brass HP

Wasalmonslayer
05-06-2018, 11:13 PM
Give me your emails guys and we will get it Rollin here and move it to active once we reach enough interest.

Thank You!

Beagle333
05-06-2018, 11:44 PM
I'm in for a 4 cav brass HP mold in .434 please.

shutupandjump at yahoo dot com

Lakehouse2012
05-06-2018, 11:50 PM
(Lakehouse2012) - sorgatz aT ameritech d0T net - .432 4-cav Brass HP (zip code 48178)

Wasalmonslayer
05-07-2018, 03:38 PM
Got you guys down keep em rolling. Also please attach your zip code.

Thank You!

Lakehouse2012
06-12-2018, 10:18 PM
WaSlayer, you've got me on the hitek, I would like the LG version please. Consider this a bump as well :)

Wasalmonslayer
06-12-2018, 11:33 PM
WaSlayer, you've got me on the hitek, I would like the LG version please. Consider this a bump as well :)


Got you fixed up buddy!
Sorry about that....

Wasalmonslayer
06-12-2018, 11:37 PM
We have 6-7 interested this is close to active.

Keep em Rollin please I would love to have this one go live :)

Wasalmonslayer
06-25-2018, 01:48 AM
Bumpski

georgerkahn
06-25-2018, 07:45 PM
I'll be privileged to purchase:
One 4 cavity HP with all the pins Brass
georgerkahn kahngr at potsdam dot edu

Wasalmonslayer
06-26-2018, 12:07 AM
I'll be privileged to purchase:
One 4 cavity HP with all the pins Brass
georgerkahn kahngr at potsdam dot edu

Got you added my friend

Thank you!

Wasalmonslayer
06-28-2018, 03:43 PM
May I bump mine up to .434 please. I would like to make this one very soft and it'll drop smaller.
Thanks!

Got you fixed up.

Thanks!

Hardcast416taylor
06-30-2018, 11:13 AM
Just a question for those of us in the crowd, but what is the cost of a 4 cavity solid base and solid nose. I`m afraid that I don`t carry any Euro`s in my wallet.Robert

Wasalmonslayer
06-30-2018, 03:22 PM
Just a question for those of us in the crowd, but what is the cost of a 4 cavity solid base and solid nose. I`m afraid that I don`t carry any Euro`s in my wallet.Robert



At the current exchange rate it’s about $100

Wasalmonslayer
07-09-2018, 01:08 AM
Sunday bump :)

Wasalmonslayer
07-18-2018, 09:56 AM
Midweek bump

StuBach
07-18-2018, 05:58 PM
Any update on the HB version buy? Id be game for that one if it comes up.

Wasalmonslayer
07-18-2018, 10:06 PM
Any update on the HB version buy? I’d be game for that one if it comes up.


This one was a hollow base in the beginning the popular vote changed it to a hollow point design...

If guy want me to start a hollow base version please state it here.
If we get 5 guys I will open a hollow base version of this design.

Thanks!
Wasalmonslayer

Mr_Sheesh
07-21-2018, 01:10 AM
rd232d aT yahoo d0T com - .430 4-cav Brass HP w/pins and handles (zip code 98007)

Wasalmonslayer
07-21-2018, 09:30 AM
Got you added sir

Thank you!

Getting closer to active just need a handful more people

Mr_Sheesh
07-21-2018, 05:10 PM
Thank you for doing the Honcho work :)

weik
07-27-2018, 09:28 AM
I may be interested in a 4 cav solid .430

Wasalmonslayer
07-28-2018, 02:49 PM
I may be interested in a 4 cav solid .430

Email addy so I can put you on the list if you want one.

Thanks

Wasalmonslayer
08-25-2018, 07:17 PM
Bump :)

weik
08-28-2018, 09:40 AM
bumped

Wasalmonslayer
09-21-2018, 08:17 AM
Friday bump

hicard
01-09-2019, 12:35 PM
Both attachments come up as invalid so I am unable to see the mold.

thraxx
01-09-2019, 01:06 PM
I'd like one of these.

vfluckey at midco dot net - .432 4-cav HP (zip 57110) with DHL

Any idea what these will weigh?

brass410
01-09-2019, 02:06 PM
cant see pics says invalid attachment

Mr_Sheesh
01-10-2019, 12:56 AM
Going to change mine a bit -

rd232d aT yahoo d0T com - 4 Cavity HP .432 and handles (zip code 98007)

Thanks!

thraxx
02-12-2019, 10:32 AM
I'd like one of these.

vfluckey at midco dot net - .432 4-cav HP (zip 57110) with DHL

Any idea what these will weigh?

*nudge*

Wasalmonslayer
02-12-2019, 11:25 AM
I'd like one of these.

vfluckey at midco dot net - .432 4-cav HP (zip 57110) with DHL

Any idea what these will weigh?

Got you fixed up

Thank you!

Wasalmonslayer
02-12-2019, 11:25 AM
cant see pics says invalid attachment

Not sure what happened to the pics???
I will try and get that sorted out!

Wasalmonslayer
02-12-2019, 11:27 AM
Going to change mine a bit -

rd232d aT yahoo d0T com - 4 Cavity HP .432 and handles (zip code 98007)

Thanks!

Got you fixed up!

ddixie884
02-16-2019, 03:35 AM
Great looking design.......

Dpmsman
02-19-2019, 12:50 AM
I would like a 4 cavity HB. jstahlconstruction at yahoo dot com
Thanks

Wasalmonslayer
02-20-2019, 09:57 AM
I would like a 4 cavity HB. jstahlconstruction at yahoo dot com
Thanks

This one is being ran as hollow point or solid form.
Do either of those styles interest you??

We would have to run another group buy for hollow base as the bullet sets in the mold upside down so the pins sliding pins could give you a hb instead of a hp.
That means different cherry, pins.

georgerkahn
02-20-2019, 11:25 AM
Seeing this group buy on top, I elected to see what I had ordered, noting I was remiss in stating preferred cavity size. As my plan will be to cast, load, and shoot in .44 S&W Special revolvers, I believe 0.430" may be best? If so, kindly amend my order (Post #18) with this size -- or if, perhaps (say, 0.432") another will work better -- please feel free to change to that, too.
Thanks.
geo

Dpmsman
02-21-2019, 12:15 AM
I would be happy with a solid. Thanks

Wasalmonslayer
02-21-2019, 12:48 AM
I would be happy with a solid. Thanks

What diameter?

Dpmsman
02-21-2019, 05:38 PM
.432 please. Thanks

Wasalmonslayer
02-21-2019, 11:22 PM
.432 please. Thanks

Gotcha fixed up
Thank You!

Wasalmonslayer
03-30-2019, 09:31 AM
Bump for saturday

Lakehouse2012
03-31-2019, 08:33 PM
Bump for saturday

This one needs another bump! This wadcutter will be perfect for range-days! Get your 44mag out of the closet and load up some light rounds for fun, rather than the normally painful 240gr rounds... :)

ldmcrook
04-01-2019, 12:59 PM
I would like: solid, 4 cav brass, 0.432

mjcrookston at msn dot com

ldmcrook
04-01-2019, 01:00 PM
My zip code is 84095. Thanks.

Wasalmonslayer
04-02-2019, 12:23 AM
Got you added sir
Thank you!

N1c0l4s
08-11-2019, 04:57 PM
how many more to get into production?

Wasalmonslayer
08-12-2019, 09:11 AM
how many more to get into production?

Per Miha’s request it’s take 100 hollow point pins to make a run and or 20 solid mold purchases with a new design.
Sooooo this one is a little while off.
We can brake out solid buys from hollow point if there is enough interest.

Lakehouse2012
08-12-2019, 09:14 AM
Im game for that, make mine a solid please

Sent from my SM-G920V using Tapatalk

N1c0l4s
08-13-2019, 05:51 AM
I am surprise that no more people asking for it!!

This is the closer boolit desing that i found from the old lee 208gn button nose wadcutter...

Meaby its need to be promote somewhere else hehe!!

I live in canada, can i be in for these group buy too??

Lakehouse2012
08-13-2019, 08:55 AM
I am surprise that no more people asking for it!!

This is the closer boolit desing that i found from the old lee 208gn button nose wadcutter...

Meaby its need to be promote somewhere else hehe!!

I live in canada, can i be in for these group buy too??Of course you can get in on the Group Buys. [emoji16]

Sent from my SM-G920V using Tapatalk

SSGOldfart
08-13-2019, 09:06 AM
If it was an HP, I'd be in. It wouldn't need 4 different pins, just one thin HP pin. [smilie=s:
There's just something about an HP wadcutter that I like.

Yep same here. One could flip it over and have a hollow base,I 'm guessing could use a larger pin for a bigger hollow base of wanted,(most of us have lots of pins from other molds)

N1c0l4s
08-14-2019, 06:17 AM
well im in for a solid base 4 cav brass at .432
northcaster44 at outlook dot com
J9X 3C9 Canada

Wasalmonslayer
08-17-2019, 05:46 PM
I am surprise that no more people asking for it!!

This is the closer boolit desing that i found from the old lee 208gn button nose wadcutter...

Meaby its need to be promote somewhere else hehe!!

I live in canada, can i be in for these group buy too??

Welcome aboard and tell all your friends :)

Wasalmonslayer
08-17-2019, 05:49 PM
Yep same here. One could flip it over and have a hollow base,I 'm guessing could use a larger pin for a bigger hollow base of wanted,(most of us have lots of pins from other molds)

Mold is machined differently you cannot do hollow point and hollow base in the same buy with this design.
You could do that with a dual end wadcutter with different pins.

bowfin
08-26-2019, 05:39 PM
4 Cavity Brass HP .430"

mjones23ATnebDOTrrDOTcom

Wasalmonslayer
09-04-2019, 04:12 PM
4 Cavity Brass HP .430"

mjones23ATnebDOTrrDOTcom

You are added

Thank You!

Dpmsman
09-19-2019, 11:04 PM
Still hoping this one makes it.

N1c0l4s
09-22-2019, 05:16 AM
Still hoping this one makes it.

i am hoping too... i love the lee version so much but... my old mold getting tired and i had work on it soooo much to keep it fonctional!!
A new one will be so welcome..

Wasalmonslayer
09-29-2019, 11:07 AM
We will keep it alive till it happens.
May take a while but it will be worth it.

Lakehouse2012
09-29-2019, 11:25 AM
We will keep it alive till it happens.
May take a while but it will be worth it.Max, will you update my zip code to 48442 please

Sent from my SM-G920V using Tapatalk

Wasalmonslayer
09-29-2019, 03:20 PM
Max, will you update my zip code to 48442 please

Sent from my SM-G920V using Tapatalk

Done deal buddy!

Wasalmonslayer
12-10-2019, 12:03 PM
Bumpski

bowfin
12-11-2019, 03:09 PM
I apologize for this, but could I change my order from .430" to .432"?
mjones23atnebdotrrdotcom

252799

Wasalmonslayer
12-16-2019, 01:09 AM
I apologize for this, but could I change my order from .430" to .432"?
mjones23atnebdotrrdotcom

252799

All fixed up!

Sunday bump

Wasalmonslayer
02-22-2020, 03:47 PM
Bump it up

Wasalmonslayer
05-08-2020, 09:05 AM
Bumpity

Wasalmonslayer
08-05-2020, 08:44 PM
Bumpski

KVO
08-06-2020, 11:16 PM
I'm in for a 6 cavity aluminum solid 0.432" diameter. Zip 78665. BULLS underscore EYE underscore 264 AT hotmail DOT com

Wasalmonslayer
08-11-2020, 02:32 PM
I'm in for a 6 cavity aluminum solid 0.432" diameter. Zip 78665. BULLS underscore EYE underscore 264 AT hotmail DOT com

You are added.

Thank you!

ddixie884
08-25-2020, 04:22 PM
Very interesting............

Wasalmonslayer
10-24-2020, 01:57 PM
Bump it up :)

Wasalmonslayer
03-24-2021, 12:21 AM
Bumpski

Olevern
04-19-2021, 06:59 PM
I'd like a .430" solid brass lube groove, plz.
Olevern
midimizeatwildbluedotnet
16923

Wasalmonslayer
04-27-2021, 03:31 PM
List moving down the page.

4 Cavity Hp Brass List -

1) shutupandjump at yahoo dot com - 4 Cavity .434
2) sorgatz aT ameritech d0T net - .432 4-cav Brass HP (zip code 48442)
3) goodalloy maybe?
4) stubach maybe?
5) georgerkahn kahngr at potsdam dot edu - 4 Cavity HP .432 with handles
6) rd232d aT yahoo d0T com - 4 Cavity HP .432 and handles (zip code 98007)
7) vfluckey at midco dot net - 4-cav HP .432 (zip 57110) with DHL
8)


4 Cavity Brass / 6 Cavity Aluminum Solid -

1) max at yvmarine dot com - 6 Cavity Aluminum .432 zip (98903)
2) nueces maybe 2?
3) panshovel at live dot com -4 Cavity brass .430
4) jstahlconstruction at yahoo dot com - 4 Cavity Brass .432
5) mjcrookston at msn dot com - 4 Cavity Brass .432 (84095)
6) northcaster44 at outlook dot com - 4 Cavity Brass .432
7) mjones23ATnebDOTrrDOTcom - 4 Cavity Brass .432
8) BULLS underscore EYE underscore 264 AT hotmail DOT com - 6 Cavity Aluminum .432 (78665)
9) midimizeatwildbluedotnet - 4 Cav Brass .430
10)
11)

4 Cavity HP Hi Tek -

1)
2)
3)
4)
5)

4 Cavity Brass / 6 Cavity Aluminum Solid Hi Te

1)
2)
3)
4)
5)[/QUOTE]