PDA

View Full Version : ACTIVE: MP Mold -.453 225gr WNFP with HP option



Lakehouse2012
04-21-2018, 08:37 PM
LAST CALL - 09SEPT2019

After coordinating working with @Goodalloy we have a new design off of 452484 w/GC, see thread link below for history.
http://castboolits.gunloads.com/showthread.php?357651-Any-interest-in-a-lyman-452484-stlye

- Casting at .453 or .455 (You choose)
- Flat base or Gas Check (You choose)
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handles (NOT included but you can add for an +$20)
- Sample of sprue lube is included (15ml)
- HP offering (Pins are Penta, Large, small and blanks)

Lube groove w/GC casts 237gr with WW
Hollow Point w/GC casts 225gr with WW
Smooth side casts 242gr with WW

Click image for larger version.

218907

Prices are with shipping included, below.

- 2 Cavity Hollow Point Brass - Price will be determined by Miha at time it's shipped
- 4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
- 4 Cavity Solid Brass - 95 Euro's (80,75 Euros with discount)
- 6 Cavity solid Aluminum - 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

2 cavity Lube Groove HP (Brass mold) with (Gas Check or Flat base) (state size .453 or .455)
1) (NYBushBro) 2-cav .455 NLG, HP with all pins - mopedmedic AT hotmail DOT com
2) (sukivel) - 2 cav FB .453 brass HP with all pins - inkgardener at gmaildotcom
3)
4)
5)
6)

4 cavity Lube Groove HP (Brass mold) with (Gas Check or Flat base) (state size .453 or .455)
1) Amadaus 101 at out look dot com - 4 cavity HP, GC, .453", all pins, reg lube groove.
2) (evoevil) - evoevil .... AT ....AOL....dot ....com - 4 cavity HP, FB, .455", all pins
3) thadd3220 at yahoo d0t com - 4 cavity with lube groove HP Plain Base all pins .453 +handles
4) (davek8s) - Davidcates408(at)gmail(dot)com - 4-cav HP, NLG, FB .453", regular lube groove
5) (rogerpjr) - 4 cav, HP, lube groove, FB, .453, + Handles - rpetrella39 at msn dot com
6) (nueces) - mhkilgore at mac dot com, 4 cavity lube groove brass HP GC, 0.453
7) (tradebear55) - 4 cavity HP GC .455 - bluewrench 75 at g mail dot com - Zip 26034 - DHL
8) (thraxx) - vfluckey at midco dot net - brass 4 cavity lube groove HP, plain base, .453
9) (Lakehouse2012) - .453 HP with lube groove, FB - sorgatz At ameritech d0t net. (Honcho mold)
10) (rcn11thacr) - 4 cav, NLG HP, Flat base (.455) +Handles - Redoldspot at gmail dot com
11) (buickbob) - 4 cav brass GC .453, all pins mold handle - rrw052048 At yahoo d0t com
12) (jdfoxinc) - .453, HP, flat base, lube groove - jdfoxinc at aol dot com
13) (prettyface) - 4 cav lube groove HP, plain base, .453 - pettypace at g mail d0t c0m:
14) (sfcairborne) - 4 cav, HP all pins Lube grove .453, PB - Mywhittyoneatyahoodotcom
15) (reddhawkk) 4 cavity HP brass plain, base with lube grooves, .453 dia. w/all pins. eagle-rainATcoxDOTnet
16) (Boomsticks Firearms) - 4-cav, HP, LG, PB .455 - boomsticksfirearms at lowcountry dot com
17) (boomstraw) - 4 cav HP, Plain Base, .453", all pins, reg lube groove - ALBRooMS at coMCasT doT neT
18) (AnthonyB) - 4-cav HP, plain base with all pins - Anthony B (no space) at verizon dot net.
19) (harley45) - 4 cav, GC, HP, .453 - Eric at whitetigerleatherworks dot com
20) (tja6435) - 4 cavity HP, FB, .453” - Zip 81252 - ramsbooty at gmaildotcom
21) HankAz) - 4 cavity Lube Groove, HP, FB .453 all pins + Handles - Onefingerhank(at)gmail(dot)com
22) (Rockzilla) - 4 cav Lube Groove, HP, FB, .453 - krantzent (at) googlemail (dot) com
23) (Multra) - 4 cav, .453, Lube Groove, HP (Brass mold) with (Flat base) - Multra @ gmail
24) (FLYCUTTER) - 4 cavity brass hp. plain base lube grooves .453 dia. w/all pins - rUNDERSCOREkarkATattdotNET
25) (Ltdshooter) - 4 cav HP, GC, .453", all pins, regular lube groove -elarsdvc at gmail dot com
26) (ranger391xt) - 4 cav, HP, Flat base (.453) - ranger391xt at gmail dot com
27) (Old School Big Bore) 4-cav, HP ,FB all pins +handles - cctxsniper AT yahoo DOT com
28) (critterkillr) - 4-cav, HP, FB, .453 dia w/all pins. - krslates at live dot com
29) (fdrywkr) - 4-cav HP, FB, .453 dia, grooves, all pins +handles - patrnmkr at lhtot dot com
30) (StuBach) - 4-cav lube groove HP, NGL, .453 - Tryandstopthisox at gmail dot com
31) (Cord) - 4 Cav .453 HP, GC, with Lube Groove all pins - denbay58 at twc dot com
32) (Capt.Red.44) - 4-cav, PB, HP, all pins, .453 +handles - Capt.tipton at g male, zip 32059
33) (redriverhunter) - 4 cav brass HP, GC, .453", all pins, reg lube groove - jklm98315 at yahoo dot com
34) (Cowhide) - 4-cav, lube grove HP GC .455" all pins - +handles - mdsleatherworks4u at gmail dot com - zip code 63640
35) (Armorguy63) - 4 cavity brass HP, PB, .453", all pins, MP handles, smooth - kshafer1 at gmail dot com
36)
37)
38)



4 cavity Smooth side HP (Brass mold) with (Flat base only) (state size .453 or .455)
1) (agamon) - asuero at bk dot ru - 4 cavity HP, NLG, FB, .453", all pins
2) (autodidact) - jbpaul at suddenlink dot net - 4 cavity, NLG, HP, FB, .453, zip 71111
3) (jmort) - 4 cav (NLG) HP, FB, .453 - All Pins - middle earth sales and service at g mail dot com
4) (jmort) - 4 cav (NLG) HP, FB, .453 - All Pins - middle earth sales and service at g mail dot com
5) (papahashbrown) 4 cav NLG, HP, Flat base (.453) - p a p a h a s h b r o w n (at) g m a i l (dot) c o m
6) (Drew P) - 4 cav HP, no lube groove, .453 - tipstuck at yahoo dot commm
7) (RT4406) - 4 cav, NLG, HP (Brass mold), .453", all pin - RT4406 at a o l dot com
8) (rcn11thacr) - 4 cav, Smooth side, HP, Flat base (.455) - Redoldspot at gmail dot com
9) (AZBrian) - 4 cav HP w/all pins, NLG, FB/PB, .453", + handles - brian dot dinse at yahoo dot com
10) (justindad) - 4-cav, HP all pins, NLG, .453 DIA +handles - justindad (at) protonmail (dot) com
11) (starbits) - 4-cav, HP with all pins, NLG, .453 DIA, +handles - katy2kary at yahoo dot com
12)
13)
14)
15)
16)

4 cavity Solid (Brass mold) with (Gas Check or Flat base) (state size .453 or .455)
1) (misterzr) - keith(dot)kohlruss(at)gmail(dot)com - 4 cavity brass solid with no lube grooves (smooth side).453
2) (jughead76) - 4 cav brass solid, GC .453 lube groves - Jay72145 at gmail dot com
3)
4)
5)
6)
7)

6 cavity Lube Groove Aluminum, (Gas Check of Flat base) (state size .453 or .455)
1) Amadaus 101 at out look dot com - 6 cavity solid, GC, .453", regular lube groove
2) (NuJudge) - 6-cav, plain base, regular grooves, .455" +handles - dingell (the number 4)judge(at)yahoo.com
3) (nueces) - mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.453
4) (nueces) - mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.455
5)
6) (cainttype) - 6 cav alum, GC - drctml AT yahoo DOT com
7)

6 cavity Smooth Side Aluminum, (Flat base only) (state size .453 or .455)
1) (Johns87) - 6 cav, NLG, alum, FB .453 +handles - johns87 at comcast dot net
2) (brazdek) - 6 cav alum, NLG .453. - bzajdek atttttt hotmailll dotttt commm
3)
4)
5)
6)
7)

GoodAlloy
04-21-2018, 10:31 PM
Please puy me down for;
4 cavity HP, GC, .453", all pins, reg lube groove.

GoodAlloy
04-21-2018, 10:34 PM
I will also take ;
6 cavity solid, GC, .453", regular lube groove.

evoevil
04-21-2018, 10:42 PM
4 cavity HP, GC, .453", all pins
evoevil .... AT ....AOL....dot ....com

Lakehouse2012
04-22-2018, 12:16 AM
Thanks Sir, I pulled your email from another post, make sure I have it correct please.


Please puy me down for;
4 cavity HP, GC, .453", all pins, reg lube groove.


I will also take ;
6 cavity solid, GC, .453", regular lube groove.

Lakehouse2012
04-22-2018, 12:19 AM
Evo- I put you under lube grove, is that correct?


4 cavity HP, GC, .453", all pins
evoevil .... AT ....AOL....dot ....com

Lakehouse2012
05-03-2018, 08:22 PM
Mid-week bump...

Sent from my SM-G950U using Tapatalk

evoevil
05-10-2018, 08:09 AM
Evo- I put you under lube grove, is that correct?

yes, thanks

bronte454
05-10-2018, 06:03 PM
I would be interested in a 4 cavity with lube groove HP Plain Base all pins .453 . Email is thadd3220 at yahoo dot com . Going to use this for 1911 ACP does anyone foresee any kind of issues with this fitting that I may be missing ? Thank you for any information concerning this application.

Lakehouse2012
05-10-2018, 10:48 PM
Hi Bronte454, 45 ACP is the targeted chamber for this one, it follows the nose profile within 10% of all the RN copper ammo. This will be a good runner!

I've got you on the list, thanks!


I would be interested in a 4 cavity with lube groove HP Plain Base all pins .453 . Email is thadd3220 at yahoo dot com . Going to use this for 1911 ACP does anyone foresee any kind of issues with this fitting that I may be missing ? Thank you for any information concerning this application.

hicard
05-19-2018, 09:46 AM
I'll sign up for a 4 cavity HP, GC, .453", all pins, reg lube groove. hicard21atoutlookdotcom

Lakehouse2012
05-19-2018, 09:52 AM
I'll sign up for a 4 cavity HP, GC, .453", all pins, reg lube groove. hicard21atoutlookdotcom

Thanks Hicard, I've added you to the list!

bronte454
07-29-2018, 01:42 AM
Did this one die on the vine ? Somebody surely shoots a 45 and is in need

jdfoxinc
07-29-2018, 11:42 AM
jdfoxinc at aol dot com six cavity Al flat base lube groove all pins .453.

jmort
07-29-2018, 11:51 AM
4 cavity smooth side .453
middle earth sales and service at g mail dot com

Lakehouse2012
07-29-2018, 09:07 PM
jdfoxinc at aol dot com six cavity Al flat base lube groove all pins .453.Thanks Sir, I've got you down

Sent from my SM-G950U using Tapatalk

Lakehouse2012
07-29-2018, 09:09 PM
4 cavity smooth side .453
middle earth sales and service at g mail dot comMort- do you want the solid or HP?

Sent from my SM-G950U using Tapatalk

thraxx
07-31-2018, 11:37 AM
would this really need a GC at 45ACP speeds?

FLYCUTTER
08-29-2018, 01:03 PM
Put me down for a 4 cavity hp. brass mold, plain base with lube grooves, .453 dia. w/all pins. RunderscoreKARKatATTdotNET
Thanks Lakehouse for running this group buy.

Lakehouse2012
08-29-2018, 01:34 PM
Put me down for a 4 cavity hp. brass mold, plain base with lube grooves, .453 dia. w/all pins. RunderscoreKARKatATTdotNET
Thanks Lakehouse for running this group buy.

I've got you on there, Thank you!

Lakehouse2012
08-29-2018, 01:36 PM
would this really need a GS at 45ACP speeds?

Hi Thraxx- you are right, it wouldnt be needed for ACP, but this might be useful on 45 LC and there are other cals that could use it.

jdfoxinc
08-30-2018, 10:44 PM
Lakehouse please review my first post. Al 6 cavity.

Lakehouse2012
08-30-2018, 10:48 PM
Lakehouse please review my first post. Al 6 cavity.

Thanks for the correction JD, I think I've fixed you up.

agamon
10-05-2018, 01:03 PM
I'll sign up for a 4 cavity Smooth side HP (Brass mold), .453", all pins, no lube groove. I hope it will fit to my Mark23. asuero at bk dot ru

Thanks!

Nueces
10-05-2018, 01:20 PM
I'm in for three moulds:

mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.453

mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.455

mhkilgore at mac dot com, 4 cavity lube groove brass HP GC, 0.453

Lakehouse2012
10-06-2018, 12:28 AM
I'll sign up for a 4 cavity Smooth side HP (Brass mold), .453", all pins, no lube groove. I hope it will fit to my Mark23. asuero at bk dot ru

Thanks!

Thanks agamon, I've got you signed up!

Lakehouse2012
10-06-2018, 12:32 AM
I'm in for three moulds:

mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.453

mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.455

mhkilgore at mac dot com, 4 cavity lube groove brass HP GC, 0.453

Thank you Nueces! Your order turns this one into "active"!!!

Lakehouse2012
10-17-2018, 11:19 PM
Wednesday evening bump...

thraxx
10-25-2018, 03:39 PM
one please.

(thraxx) - vfluckey at midco dot net - brass 4 cavity lube groove HP, plain base, .453

Lakehouse2012
10-27-2018, 11:51 PM
Tnkaks, i have you updated


Sent from my SM-G920V using Tapatalk

thraxx
10-27-2018, 11:54 PM
woops, you have me down on the solid list, I wanted the HP mold. thanks!

jmort
10-28-2018, 03:02 PM
6 cavity Smooth Side Aluminum .453
middle earth sales and service at g mail dot com

wrench
10-28-2018, 06:47 PM
I'm in on this one...
4 cavity with lube groove HP Plain Base all pins .453"
sam3040 at comcast dot net

Lakehouse2012
10-29-2018, 01:28 AM
6 cavity Smooth Side Aluminum .453
middle earth sales and service at g mail dot com

Thanks Sir, I've got you on the list!

Lakehouse2012
10-29-2018, 01:32 AM
I'm in on this one...
4 cavity with lube groove HP Plain Base all pins .453"
sam3040 at comcast dot com

Thanks Wrench, I've added you. We are making good progress on this one!

thraxx
10-31-2018, 12:04 AM
woops, you have me down on the solid list, I wanted the HP mold. thanks!

Lakehouse, I think you missed this post. ;)

Lakehouse2012
10-31-2018, 05:42 AM
Lakehouse, I think you missed this post. ;)

Sorry thraxx, I did miss that, and now I've fixed it.

Thanks Sir

misterzr
11-02-2018, 11:40 AM
Please put me down for a 4 cavity brass solid with no lube grooves (smooth side).453

keith(dot)kohlruss(at)gmail(dot)com

Lakehouse2012
11-03-2018, 12:00 AM
Please put me down for a 4 cavity brass solid with no lube grooves (smooth side).453

keith(dot)kohlruss(at)gmail(dot)com

I've got you on the list, Thankyou!

misterzr
11-04-2018, 08:42 PM
Lakehouse, looks like you have me down for hollow point, I was after smooth side solid (no hp)

Lakehouse2012
11-04-2018, 11:04 PM
Lakehouse, looks like you have me down for hollow point, I was after smooth side solid (no hp)

Thanks for catching that! I've moved you to the solid, smooth side.

wrench
11-24-2018, 08:38 PM
Hey lakehouse, sorry for the extra work, my email is sam 3040 at comcast dot net
I mistakenly typed .com

Lakehouse2012
11-24-2018, 11:09 PM
no problem, I've got you updated.


Hey lakehouse, sorry for the extra work, my email is sam 3040 at comcast dot net
I mistakenly typed .com

Boomsticks Firearms
12-10-2018, 01:49 PM
Is this still open

Lakehouse2012
12-10-2018, 11:21 PM
Is this still open

Sure is.

big bore nut
12-22-2018, 12:14 AM
Put me down for a 4 cavity brass HP w/lube grooves .455 dia. w/all pins plain base greggoryashley at yahoo dot com

Lakehouse2012
12-23-2018, 07:20 AM
Put me down for a 4 cavity brass HP w/lube grooves .455 dia. w/all pins plain base greggoryashley at yahoo dot comIve got you on the list, this one is pickup up some steam!

Sent from my SM-G920V using Tapatalk

wrench
01-01-2019, 04:05 PM
Lakehouse I'm sorry but I've got to drop out of this one. #7 on the list.
Thank you.

Lakehouse2012
01-02-2019, 11:05 PM
Lakehouse I'm sorry but I've got to drop out of this one. #7 on the list.
Thank you.

No problem wrench, I'll pull you off the list.

autodidact
01-04-2019, 10:40 AM
Please include me for the following:

(autodidact) - jbpaul at suddenlink dot net - brass 4 cavity, NO LUBE GROOVE, HP, plain base, .453, zip 71111

Thanks,
JB

Lakehouse2012
01-04-2019, 11:28 PM
Please include me for the following:

(autodidact) - jbpaul at suddenlink dot net - brass 4 cavity, NO LUBE GROOVE, HP, plain base, .453, zip 71111

Thanks,
JB

Thanks JB, I've got you on the list!

jmort
01-11-2019, 12:41 AM
Would like to change it up
Want
4 cavity Smooth side (NLG) HP (Brass mold) with (Flat base only) (state size .453)
All Pins

middle earth sales and service at g mail dot com

I am currently #1 on the 6 cavity smooth solid at bottom of list.

Thank you

Lakehouse2012
01-13-2019, 12:48 AM
Would like to change it up
Want
4 cavity Smooth side (NLG) HP (Brass mold) with (Flat base only) (state size .453)
All Pins

middle earth sales and service at g mail dot com

I am currently #1 on the 6 cavity smooth solid at bottom of list.

Thank youI've got you modified on the list. Thanks!

Sent from my SM-G920V using Tapatalk

tradbear55
01-15-2019, 02:59 PM
I'd like a 4 cavity HP GC .455
bluewrench 75 at g mail dot com
Zip 26034
Thank you.

Lakehouse2012
01-15-2019, 05:16 PM
I've added you into the list!

Thanks,


I'd like a 4 cavity HP GC .455
bluewrench 75 at g mail dot com
Zip 26034
Thank you.

Buickbob
01-19-2019, 10:33 PM
Please include me for the 4 cavity brass GC .453 with lube groove, all pins and mold handle. rrw052048@yahoo.com

After coordinating working with @Goodalloy we have a new design off of 452484 w/GC, see thread link below for history.
http://castboolits.gunloads.com/showthread.php?357651-Any-interest-in-a-lyman-452484-stlye

- Casting at .453 or .455 (You choose)
- Flat base or Gas Check (You choose)
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handles (NOT included but you can add for an +$20)
- Sample of sprue lube is included (15ml)
- HP offering (Pins are Penta, Large, small and blanks)

Lube groove w/GC casts 237gr with WW
Hollow Point w/GC casts 225gr with WW
Smooth side casts 242gr with WW

Click image for larger version.

218907

Prices are with shipping included, below.

- 4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
- 4 Cavity Solid Brass - 95 Euro's (80,75 Euros with discount)
- 6 Cavity solid Aluminum - 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

4 cavity Lube Groove HP (Brass mold) with (Gas Check or Flat base) (state size .453 or .455)
1) Amadaus 101 at out look dot com - 4 cavity HP, GC, .453", all pins, reg lube groove.
2) evoevil .... AT ....AOL....dot ....com - 4 cavity HP, GC, .453", all pins
3) thadd3220 at yahoo d0t com - 4 cavity with lube groove HP Plain Base all pins .453
4) hicard21atoutlookdotcom - 4 cavity HP, GC, .453" lube groove, all pins
5) (flycutter) - RunderscoreKARKatATTdotNET - 4 cavity hp. brass mold, plain base with lube grooves, .453 dia. w/all pins
6) (nueces) - mhkilgore at mac dot com, 4 cavity lube groove brass HP GC, 0.453
7) (tradebear55) - 4 cavity HP GC .455 - bluewrench 75 at g mail dot com - Zip 26034
8) (thraxx) - vfluckey at midco dot net - brass 4 cavity lube groove HP, plain base, .453
9) (Lakehouse2012) sorgatz At ameritech d0t net - .455 HP with lube groove, FB. (Honcho mold)
10) (big bore nut) - 4 cavity brass HP w/lube grooves .455 dia. w/all pins plain base greggoryashley at yahoo dot com
11)
12)
13)
14)

4 cavity Smooth side HP (Brass mold) with (Flat base only) (state size .453 or .455)
1) (agamon) - asuero at bk dot ru - 4 cavity HP, NLG, FB, .453", all pins
2) (autodidact) - jbpaul at suddenlink dot net - 4 cavity, NLG, HP, FB, .453, zip 71111
3) (jmort) - 4 cav (NLG) HP, FB, .453 - All Pins - middle earth sales and service at g mail dot com
4)
5)
6)
7)

4 cavity Solid (Brass mold) with (Gas Check or Flat base) (state size .453 or .455)
1) (misterzr) - keith(dot)kohlruss(at)gmail(dot)com - 4 cavity brass solid with no lube grooves (smooth side).453
2)
3)
4)
5)
6)
7)

6 cavity Lube Groove Aluminum, (Gas Check of Flat base) (state size .453 or .455)
1) Amadaus 101 at out look dot com - 6 cavity solid, GC, .453", regular lube groove
2) (jdfoxinc) - jdfoxinc at aol dot com, .453, 6-cav flat base, lube groove
3) (nueces) - mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.453
4) (nueces) - mhkilgore at mac dot com, 6 cavity lube groove aluminum, flat base 0.455
5)
6)
7)

6 cavity Smooth Side Aluminum, (Flat base only) (state size .453 or .455)
1)
2)
3)
4)
5)
6)
7)

Lakehouse2012
01-19-2019, 11:11 PM
Welcome to the group BuickBob! I've added you into the GB. Note that I disguised your email in post #1, it helps to avoid spammers.

Stay warm tonight! :)


Please include me for the 4 cavity brass GC .453 with lube groove, all pins and mold handle. *email disguised*

jdfoxinc
01-20-2019, 05:39 PM
Lake house. I just wanted to be sure I am getting the hollow point mold.

I guess that makes me need a brass mold, not aluminum.

Lakehouse2012
01-21-2019, 11:01 AM
Hi JD,
I've moved you into the 4-cav HP brass lube groove version. Please check it and make sure this is what you want.


Lake house. I just wanted to be sure I am getting the hollow point mold.

I guess that makes me need a brass mold, not aluminum.

jdfoxinc
01-23-2019, 07:40 PM
That is correct. Too bad he won't make Al molds in HP.

tradbear55
02-07-2019, 03:58 PM
Bump it

jmort
02-20-2019, 10:30 AM
Let's add one more
Please
Thank You
(jmort) - 4 cav (NLG) HP, FB, .453 - All Pins - middle earth sales and service at g mail dot com

Lakehouse2012
02-20-2019, 05:24 PM
Thanks Sir, I've added this 2nd mold of yours.

We only need 9 more HP molds to put this into last call and start getting the cherry cut. It's getting close!!


Let's add one more
Please
Thank You
(jmort) - 4 cav (NLG) HP, FB, .453 - All Pins - middle earth sales and service at g mail dot com

davek8s
03-20-2019, 11:50 PM
Davidcates408(at)gmail(dot)com

6 cavity solid, GC, .453", regular lube groove


Sent from my iPhone using Tapatalk

rototerrier
03-21-2019, 05:26 PM
P d a n 2 9 9 3 at g m a i l

2 x .453 6 cavity alum smooth side flat base.

Lakehouse2012
03-21-2019, 09:04 PM
Thanks Guys, I've got you both added to the list!


Davidcates408(at)gmail(dot)com

6 cavity solid, GC, .453", regular lube groove


Sent from my iPhone using Tapatalk


P d a n 2 9 9 3 at g m a i l

2 x .453 6 cavity alum smooth side flat base.

rototerrier
03-22-2019, 06:05 AM
Any chance the 6 cavity can be a bevel base?

Lakehouse2012
03-22-2019, 01:11 PM
Unfortunately not... The process of making a NLG out of a grooved cherry, means that Miha has to run a secondary tool into each cavity to remove the grooves from the bottom of the mold. That process also takes off the chamfer which is creating the bevel at the bottom. Sorry.... :(


Any chance the 6 cavity can be a bevel base?

rototerrier
03-22-2019, 07:23 PM
Unfortunately not... The process of making a NLG out of a grooved cherry, means that Miha has to run a secondary tool into each cavity to remove the grooves from the bottom of the mold. That process also takes off the chamfer which is creating the bevel at the bottom. Sorry.... :(

Totally understand. Just wanted to check. Thanks for the quick and thorough response.

Just received my new handles today from the handle group buy, now I need some new molds for them!

evoevil
03-27-2019, 06:27 AM
Can you change mine to a NON GC, and make it 455. If enough people don't do a 455 453 will be ok, but I would rather size it down . Thanks Chuck evoevil

Lakehouse2012
03-27-2019, 08:52 AM
Got you all fixed up evo, those are good choices, .002 is nothing to sized down to. Covers your bases for any bore size you might have.


Can you change mine to a NON GC, and make it 455. If enough people don't do a 455 453 will be ok, but I would rather size it down . Thanks Chuck evoevil

Lakehouse2012
03-27-2019, 08:54 AM
9 more HP orders and this one goes into Last Call, who else is looking to feed a 45?....

ScatterBrain
04-22-2019, 01:09 AM
9 more HP orders and this one goes into Last Call, who else is looking to feed a 45?....Will this work for 44 mag and what's is the expected cost sorry getting in late

Sent from my SM-N960U using Tapatalk

Lakehouse2012
04-22-2019, 08:10 AM
I wouldn't suggest using this boolit for 44 mag. 44 bullets are .429 - .432. This is larger at .453 you would have to size do 10 tho, thats a lot.


Will this work for 44 mag and what's is the expected cost sorry getting in late

Sent from my SM-N960U using Tapatalk

Lakehouse2012
05-20-2019, 12:02 AM
Sunday Bump- this one needs 4 more HP buyers and its into last call. Miha is going to solve his pin problem soon, so they will flow in a normal time frame.

papahashbrown
05-20-2019, 10:10 PM
I've got a Kimber Tactical Custom 1911 - anyone see any issues with this bullet feeding in this pistol?

- Paul

Lakehouse2012
05-20-2019, 11:21 PM
Paul, this boolit will run fine in the 1911 series. I'm not familar with the Kimber Tactical Custom, but its a solid bet that it will run this round!


I've got a Kimber Tactical Custom 1911 - anyone see any issues with this bullet feeding in this pistol?

- Paul

papahashbrown
05-21-2019, 08:53 AM
Please put me down for 1 of the 4 cavity Smooth side HP (Brass mold) with (Flat base only) (.453).

p a p a h a s h b r o w n (at) g m a i l (dot) c o m


Paul, this boolit will run fine in the 1911 series. I'm not familar with the Kimber Tactical Custom, but its a solid bet that it will run this round!

Lakehouse2012
05-21-2019, 10:12 AM
Please put me down for 1 of the 4 cavity Smooth side HP (Brass mold) with (Flat base only) (.453).

p a p a h a s h b r o w n (at) g m a i l (dot) c o mIve added you to the list. Thankyou!

Sent from my SM-G920V using Tapatalk

Lakehouse2012
05-24-2019, 09:19 PM
Retracing this statement, i placed it on the wrong GB. Sorry for any confusion.

Sent from my SM-G920V using Tapatalk

pettypace
05-25-2019, 07:17 AM
I'm in...

pettypace at g mail d0t c0m: brass 4 cavity lube groove HP, plain base, .453

Lakehouse2012
05-25-2019, 07:24 AM
I'm in...

pettypace at g mail d0t c0m: brass 4 cavity lube groove HP, plain base, .453Thanks Sir, ive got you on the list

Sent from my SM-G920V using Tapatalk

sfcairborne
05-28-2019, 07:36 PM
4 cavity brass, HP all pins Lube grove .453 plain bass
Mywhittyoneatyahoodotcom

Lakehouse2012
05-28-2019, 07:46 PM
Ive got you on the list, thanks!!

1 more HP order and this one goes into Last Call!!!


4 cavity brass, HP all pins Lube grove .453 plain bass
Mywhittyoneatyahoodotcom

reddhawkk
05-28-2019, 08:11 PM
(reddhawkk) 4 cavity HP brass plain, base with lube grooves, .453 dia. w/all pins. eagle-rainATcoxDOTnet

Thanks!

Lakehouse2012
05-28-2019, 08:41 PM
You are on the list! Thank you!


(reddhawkk) 4 cavity HP brass plain, base with lube grooves, .453 dia. w/all pins. eagle-rainATcoxDOTnet

Thanks!

Lakehouse2012
05-28-2019, 08:44 PM
Ive got you on the list, thanks!!

1 more HP order and this one goes into Last Call!!!

I apologize guys, I couldn't count... 5 more and this one is in last call. Still close, but needs a few more to call Last.

Boomsticks Firearms
06-06-2019, 04:30 PM
4 cavity Hp LG PB .455
boomsticksfirearms at lowcountry dot com

Lakehouse2012
06-06-2019, 09:51 PM
I've got you on the list Broomstick :)


4 cavity Hp LG PB .455
boomsticksfirearms at lowcountry dot com

Lakehouse2012
06-24-2019, 07:21 AM
Bump, this is a good one for your 45's.

Sent from my SM-G920V using Tapatalk

bronte454
08-06-2019, 02:42 PM
Lakehouse would you please put me down for 2 sets of mold handles please thadd3220 at yahoo dot com. I’m towards the top of the list thank you

Lakehouse2012
08-06-2019, 02:55 PM
Lakehouse would you please put me down for 2 sets of mold handles please thadd3220 at yahoo dot com. Iím towards the top of the list thank youYes sir, ive added you to the list

Sent from my SM-G920V using Tapatalk

Broomstraw
08-09-2019, 01:48 AM
Hey Lakehouse,

Put me down for this buy also. Looks good.

Brass Mold.
4 cavity HP, Plain Base, .453", all pins, reg lube groove.

ALBRooMS at coMCasT doT neT

Lakehouse2012
08-09-2019, 06:14 AM
Hey Lakehouse,

Put me down for this buy also. Looks good.

Brass Mold.
4 cavity HP, Plain Base, .453", all pins, reg lube groove.

ALBRooMS at coMCasT doT neTExcellent, ive got you updated thanks

Sent from my SM-G920V using Tapatalk

psychbiker
08-09-2019, 10:51 AM
This profile work in lever 45 colts?

Drew P
08-10-2019, 09:54 PM
4 cav HP, no lube groove, .453, tipstuck at yahoo dot commm

AnthonyB
08-10-2019, 10:25 PM
Four cavity brass HP plain base with all pins for Anthony B (no space) at verizon dot net.
Tony

Lakehouse2012
08-11-2019, 07:20 AM
4 cav HP, no lube groove, .453, tipstuck at yahoo dot commm

Thank you! You are on the list

Lakehouse2012
08-11-2019, 07:21 AM
Four cavity brass HP plain base with all pins for Anthony B (no space) at verizon dot net.
Tony

Thank you! You are on the list

Lakehouse2012
08-11-2019, 07:46 AM
We need 1 more HP buyer and this one goes into last call!

Sent from my SM-G920V using Tapatalk

FLYCUTTER
09-04-2019, 10:58 PM
Please remove me off of this group buy. Thank you

Lakehouse2012
09-04-2019, 11:04 PM
Please remove me off of this group buy. Thank you

I've updated you off of the list.

tradbear55
09-05-2019, 05:43 PM
DHL shipping please, number #7 on the 4 cavity HP
Thank you.

Lakehouse2012
09-05-2019, 08:48 PM
DHL shipping please, number #7 on the 4 cavity HP
Thank you.

Whats your Zip code Tradebear?

tradbear55
09-06-2019, 08:58 AM
Zip code 26034

Lakehouse2012
09-06-2019, 09:24 AM
Zip code 26034Thanks, updated you

Sent from my SM-G920V using Tapatalk

megasupermagnum
09-06-2019, 09:36 PM
I'll take one mold

4 cavity hollow point, .453" diameter, one lube groove, plain base, large hollow point pin (or all if not optional)

twcondon94 at gmail dot com

Lakehouse2012
09-06-2019, 10:10 PM
Yes Sir, I've updated you onto the list, Thanks!


I'll take one mold

4 cavity hollow point, .453" diameter, one lube groove, plain base, large hollow point pin (or all if not optional)

twcondon94 at gmail dot com

harley45
09-09-2019, 03:11 PM
I'd like one 4 cavity brass GC HP 453 Eric at whitetigerleatherworks dot com

Lakehouse2012
09-09-2019, 03:51 PM
I'd like one 4 cavity brass GC HP 453 Eric at whitetigerleatherworks dot comExcellent, ive got you on the list!

This one is now at LAST CALL with 25 HP orders!

Sent from my SM-G920V using Tapatalk

Lakehouse2012
09-12-2019, 07:48 AM
Miha will only be shipping via DHL from now on and i think no more invoicing, rather youll be notified the order is ready and you purchase (similar pay methods) on his website.

This is going to be a HUGE time saver for

Sent from my SM-G920V using Tapatalk

bzajdek
09-24-2019, 05:51 AM
I would like a six cavity aluminum smooth side .453 please. Email bzajdek atttttt hotmailll dotttt commm

Lakehouse2012
09-24-2019, 06:00 AM
I would like a six cavity aluminum smooth side .453 please. Email bzajdek atttttt hotmailll dotttt commmIve got you on the list

Sent from my SM-G920V using Tapatalk

tja6435
09-24-2019, 06:28 PM
4 cavity HP/GC .453”

Zip 81252

ramsbooty at gmaildotcom

Lakehouse2012
09-24-2019, 09:52 PM
4 cavity HP/GC .453”

Zip 81252

ramsbooty at gmaildotcom

Yes Sir, I've got you on the list!

megasupermagnum
10-08-2019, 11:09 PM
Any update on this one?

megasupermagnum
10-30-2019, 07:27 PM
Is there any chance this will be out in the next two days? I'm going on a trip until November 11th, and may not have access to email. I don't want to miss out on my mold.

Lakehouse2012
11-01-2019, 12:45 PM
Is there any chance this will be out in the next two days? I'm going on a trip until November 11th, and may not have access to email. I don't want to miss out on my mold.I havent gotten any feedback from miha on this mold, but think he is caught up a bit. My guess is this one is several weeks away. So you are safe for your trip. Enjoy!

Sent from my SM-G920V using Tapatalk

jughead76
12-12-2019, 03:51 PM
4 cavity brass solid, GC .453 lube groves.
Jay72145 at gmail dot com

Lakehouse2012
12-12-2019, 04:06 PM
4 cavity brass solid, GC .453 lube groves.
Jay72145 at gmail dot comIve got you on the list, thanks

Sent from my SM-G920V using Tapatalk

Lakehouse2012
01-07-2020, 12:11 AM
Bump, another that is already in LAst Call.

Any last minute takers?

Wheelguns 1961
01-07-2020, 05:41 AM
I will take a 4 cavity hollow point brass, flat base, .453”. I don’t think I missed anything. haw1961 at live dot com. I somehow missed this one. Thanks! ( wheelguns 1961)

Lakehouse2012
01-07-2020, 08:56 AM
I'm glad we caught you up! :) Ive added you to the list, Thanks!


I will take a 4 cavity hollow point brass, flat base, .453”. I don’t think I missed anything. haw1961 at live dot com. I somehow missed this one. Thanks! ( wheelguns 1961)

megasupermagnum
01-07-2020, 09:30 PM
Bump, another that is already in LAst Call.

Any last minute takers?

I hope that minute doesn't take too many more months.:kidding:

I'm excited, the only other options I've found have had too wide a nose to fit in most magazines without seating short. This design should be a great 45 acp bullet.

megasupermagnum
01-31-2020, 08:56 PM
Any update on this yet?

Rockzilla
01-31-2020, 09:48 PM
If I'm too late, will wait for another offering if not would like this.

4 cavity Lube Groove HP (Brass mold) with (Flat base) (size .453) All pins
krantzent (at) googlemail (dot) com

thanks..

-Rock

Lakehouse2012
02-01-2020, 02:44 AM
Your timing is good Rock, I've added you in to the GB.

Thanks,


If I'm too late, will wait for another offering if not would like this.

4 cavity Lube Groove HP (Brass mold) with (Flat base) (size .453) All pins
krantzent (at) googlemail (dot) com

thanks..

-Rock

Lakehouse2012
02-01-2020, 02:48 AM
Any update on this yet?

Hi Mega,

When I talked to Miha last week he said the pins were ordered and he was getting back into the shop and starting to cut blocks. Europe has quite a long holiday period and he was telling me that the entire month of december, he wasnt able to machine, but that January was catch-up. I think we will start to see movement in the next few weeks.

megasupermagnum
03-06-2020, 10:57 PM
Please remove me from this group buy.

Lakehouse2012
03-06-2020, 11:13 PM
Please remove me from this group buy.

I've removed you from the list.

megasupermagnum
03-06-2020, 11:14 PM
Thanks.

rototerrier
03-13-2020, 07:14 AM
How we looking in this? Anytime soon?

Lakehouse2012
03-13-2020, 07:22 AM
How we looking in this? Anytime soon?

I asked Miha for an update a few weeks back and haven't heard back on this one yet. I'll ping him again and wait patiently :)

Stay tuned.

Rockzilla
03-14-2020, 11:36 PM
I just checked my order and "all pins" aren't listed in it. Did I make a mistake?
Thanks, Rock

Lakehouse2012
03-14-2020, 11:48 PM
I just checked my order and "all pins" aren't listed in it. Did I make a mistake?
Thanks, RockNo worries, everyone gets all pins, no matter what they say.... I dont know why some feel the need to even write it. :)

Sent from my SM-A102U using Tapatalk

rototerrier
04-01-2020, 05:30 AM
Please remove me from this group buy.

Lakehouse2012
04-01-2020, 09:40 AM
Please remove me from this group buy.

I've removed you from the list (2 molds)

tomme boy
04-03-2020, 05:03 AM
Don't you think you need to tell everyone that SHIPPING IS NOT INCLUDED! And they will be charged an extra $17.50 or more to the price?

Lakehouse2012
04-03-2020, 11:22 PM
Miha called me last night, he is working on revamping the pricing and getting this out to all the existing GB's.

Until I have that, I dont think its worthwhile to get everyone flamed up. The entire country is stirred up, is it necessary to stir up this group also?


Don't you think you need to tell everyone that SHIPPING IS NOT INCLUDED! And they will be charged an extra $17.50 or more to the price?

hicard
04-08-2020, 10:30 AM
Please remove me from this group buy. hicard21 at outlook dot com I am #4 on the list.

Lakehouse2012
04-08-2020, 09:44 PM
Please remove me from this group buy. hicard21 at outlook dot com I am #4 on the list.

Sure, I've removed you. I hope all is well!

davek8s
04-08-2020, 10:42 PM
Davidcates408(at)gmail(dot)com

6 cavity solid, GC, .453", regular lube groove


Sent from my iPhone using Tapatalk

If itís not to late can I change my order?

Brass, HP, GC, .453, regular lube groove.


Sent from my iPhone using Tapatalk

Lakehouse2012
04-10-2020, 09:20 AM
If it’s not to late can I change my order?

Brass, HP, GC, .453, regular lube groove.


Sent from my iPhone using Tapatalk

Sure Dave, I've placed you into slot #4 of the HP section.

thanks.

Multra
05-01-2020, 08:17 PM
Can I sneak in for 4 cavity Lube Groove HP (Brass mold) with (Flat base) (453)?
Multra @ gmail

Thanks

Lakehouse2012
05-05-2020, 10:55 AM
Can I sneak in for 4 cavity Lube Groove HP (Brass mold) with (Flat base) (453)?
Multra @ gmail

ThanksSorry so slow, I've added you to the list.
Thanks!

Sent from my SM-A102U using Tapatalk

RT4406
05-08-2020, 08:03 AM
Please put me down for 4 cavity Smooth side HP (Brass mold), .453", all pins, no lube groove. RT4406 at a o l dot com .Thanks SR

Lakehouse2012
05-08-2020, 09:05 AM
Please put me down for 4 cavity Smooth side HP (Brass mold), .453", all pins, no lube groove. RT4406 at a o l dot com .Thanks SR

Thanks, I've got you on the list!

Wheelguns 1961
06-18-2020, 08:05 PM
Any idea what’s going on with this?

Lakehouse2012
06-19-2020, 01:34 AM
Any idea what’s going on with this?

He is in process with this one

FLYCUTTER
06-26-2020, 04:14 PM
Put me down for a 4 cavity brass hp. plain base lube grooves .453 dia. w/all pins . rUNDERSCOREkarkATattdotNET

Lakehouse2012
06-28-2020, 02:00 AM
Put me down for a 4 cavity brass hp. plain base lube grooves .453 dia. w/all pins . rUNDERSCOREkarkATattdotNET

Thanks Sir, I've added you to the list!

Wheelguns 1961
07-31-2020, 06:37 PM
Please remove me from this list. I just got one from noe.

Lakehouse2012
07-31-2020, 09:30 PM
Please remove me from this list. I just got one from noe.

No problem, I've removed you.

Uncle Dave
08-01-2020, 01:43 PM
davelandvatter AT yah00. C0m
Please sign me up for a 4 cav brass w/smooth sides flat base at .453 with all pins

Lakehouse2012
08-01-2020, 11:09 PM
Thanks Dave, I've added you to the list!


davelandvatter AT yah00. C0m
Please sign me up for a 4 cav brass w/smooth sides flat base at .453 with all pins

tja6435
08-16-2020, 12:07 AM
I am #20 on the HP list, please change mine to plain base. Thanks!

Lakehouse2012
08-16-2020, 09:04 AM
I am #20 on the HP list, please change mine to plain base. Thanks!All fixed up

Sent from my SM-A102U using Tapatalk

agamon
09-13-2020, 12:39 PM
Still without News from Miha?

Lakehouse2012
09-13-2020, 09:28 PM
Still without News from Miha?

Miha talked with me last night. he is up and running and should be running these within a few weeks.

HankAz
09-24-2020, 12:45 AM
Onefingerhank(at)gmail(dot)com-4 cavity Lube Groove HP (Brass mold)FB-.453 all pins + Handles

Lakehouse2012
09-24-2020, 06:35 PM
Onefingerhank(at)gmail(dot)com-4 cavity Lube Groove HP (Brass mold)FB-.453 all pins + Handles

Thank you Sir, you are on the list in spot #21

rogerpjr
09-26-2020, 10:49 PM
If I'm not too late I'd like to get one of the six cavity aluminum with lube groove, flat base, and .453 diameter.

Lakehouse2012
09-26-2020, 10:51 PM
If I'm not too late I'd like to get one of the six cavity aluminum with lube groove, flat base, and .453 diameter.

Hi Roger, You are not too late, but will you modify your previous post and add a disguized email address please so I can put you on the list.

rogerpjr
09-26-2020, 11:00 PM
Sorry, I guess I didn't read the descriptions close enough. I need the hollow point version, so please change my request to the 4 cavity brass with all hollow point pins in lube groove and .453 diameter. Use rpetrella39 at msn dot com

Lakehouse2012
09-26-2020, 11:08 PM
Thank you Sir, I've put you in slot #5 of the HP group, you are good to go!



Sorry, I guess I didn't read the descriptions close enough. I need the hollow point version, so please change my request to the 4 cavity brass with all hollow point pins in lube groove and .453 diameter. Use rpetrella39 at msn dot com

HankAz
09-28-2020, 07:48 PM
Oops, double post.

Ltdshooter
09-28-2020, 09:28 PM
Hello,

Would like to get in on this one if there is still time.

4 cavity HP, GC, .453", all pins, regular lube groove

Ltdshooter

elarsdvc at gmail dot com

Lakehouse2012
09-28-2020, 09:45 PM
Yes Sir, you are just in time, I've added you onto the list!


Hello,

Would like to get in on this one if there is still time.

4 cavity HP, GC, .453", all pins, regular lube groove

Ltdshooter

elarsdvc at gmail dot com

rogerpjr
09-30-2020, 10:35 PM
I decided I didn't want to keep swapping mold handles from my other 6 cavity Lee mold, so could you add a set of mold handles to my order (#5 on list of 4 cavity brass mold) ?

Lakehouse2012
09-30-2020, 11:15 PM
Yes, its kinda a pain when you are continually swapping. I've added handles to your order. Thanks



I decided I didn't want to keep swapping mold handles from my other 6 cavity Lee mold, so could you add a set of mold handles to my order (#5 on list of 4 cavity brass mold) ?

ranger391xt
10-05-2020, 05:11 PM
Please put me down for the following:

4 cav w/ Lube Groove, HP, Flat base (.453)

ranger391xt at gmail dot com

Thanks!

Sent from my SM-N960U using Tapatalk

Lakehouse2012
10-06-2020, 07:55 AM
Please put me down for the following:

4 cav NLG, HP, Flat base (.453)

ranger391xt at gmail dot com

Thanks!

Sent from my SM-N960U using Tapatalk

You are added Sir, thanks!

ranger391xt
10-09-2020, 03:12 PM
You are added Sir, thanks!Hi,

I noticed you put me on the Lube Groove list. After thinking about it, id prefer this option. Just want to make sure the "NLG" on my entry doesn't create confusion.

Sent from my SM-N960U using Tapatalk

Lakehouse2012
10-10-2020, 12:58 AM
Good catch Ranger. I've removed the NLG and left your entry under the lubed version. For clarity, just go back to your post #171 and remove the NLG there and we are good to go!

Thanks,


Hi,

I noticed you put me on the Lube Groove list. After thinking about it, id prefer this option. Just want to make sure the "NLG" on my entry doesn't create confusion.

Sent from my SM-N960U using Tapatalk

rogerpjr
11-07-2020, 09:39 PM
I was just checking on the active status of this buy and noticed a bit of info missing from my purchase request. I am #5 in the first group with the 4 cavity brass mold and it doesn't list whether I wanted the plain base or gas check style. Would you please update it so it shows I want the plain flat base?

Lakehouse2012
11-09-2020, 08:59 PM
I was just checking on the active status of this buy and noticed a bit of info missing from my purchase request. I am #5 in the first group with the 4 cavity brass mold and it doesn't list whether I wanted the plain base or gas check style. Would you please update it so it shows I want the plain flat base?

Hi Roger,

Thanks for checking this out, I've updated your request to include the FB option.

Wots
11-20-2020, 09:27 PM
I'm #14 on 4-cav Brass mold. Please remove me from this group buy. Thank-you
.

NuJudge
11-21-2020, 06:29 PM
Put me down for a 6-cavity aluminum, plain base, regular grooves, .455" diameter.
If Miha makes handles, I'd like to buy a pair of his.

dingell (the number 4)judge(at)yahoo.com

Lakehouse2012
11-21-2020, 08:08 PM
I'm #14 on 4-cav Brass mold. Please remove me from this group buy. Thank-you
.

Wots- you are not on this GB, please double check post #1 please.

Lakehouse2012
11-21-2020, 08:13 PM
Put me down for a 6-cavity aluminum, plain base, regular grooves, .455" diameter.
If Miha makes handles, I'd like to buy a pair of his.

dingell (the number 4)judge(at)yahoo.com

Hi NuJudge,

I've put you into slot #2 of the 6-cav.

Thanks,

Uncle Dave
12-13-2020, 11:36 PM
Sorry all!
I’m going to drop out on this one. Please remove me from the list -
Thanks
Dave

Lakehouse2012
12-14-2020, 09:55 AM
No problem Dave, I've removed you from the list.


Sorry all!
I’m going to drop out on this one. Please remove me from the list -
Thanks
Dave

rcn11thacr
01-17-2021, 01:20 PM
I’m in.
4 cavity Smooth side HP (Brass mold) all pins with (Flat base only) (.455)
Redoldspot at gmail dot com

Lakehouse2012
01-18-2021, 01:38 AM
Thank you Sir, I've added you onto the list!


I’m in.
4 cavity Smooth side HP (Brass mold) all pins with (Flat base only) (.455)
Redoldspot at gmail dot com

AZBrian
01-27-2021, 05:44 PM
Lakehouse, I'd like to join this buy, please. I'd like a brass 4 cavity HP w/all pins, NLG, FB/PB, .453", + handles

brian dot dinse at yahoo dot com

Thank you!, Brian

Lakehouse2012
01-27-2021, 09:13 PM
Hi Brian,

I've added you, you are all set, thank you!


Lakehouse, I'd like to join this buy, please. I'd like a brass 4 cavity HP w/all pins, NLG, FB/PB, .453", + handles

Thank you!, Brian

big bore nut
02-05-2021, 04:02 PM
Please take me off the list.

Johns87
02-05-2021, 05:09 PM
Lakehouse, please add me to the list. 6 cavity smooth side aluminum FB .453 + MP handles

johns87 at comcast dot net. Thanks

Lakehouse2012
02-05-2021, 05:19 PM
Ok, you are updated


Please take me off the list.

Lakehouse2012
02-05-2021, 05:24 PM
Ok, I have updated you to slot #1 on the list. Thanks


Lakehouse, please add me to the list. 6 cavity smooth side aluminum FB .453 + MP handles

johns87 at comcast dot net. Thanks

Ltdshooter
02-23-2021, 08:42 PM
Hello...
Any update on when this might go into production? Given the current shortage on good 45 Bullets (Projectiles); I would hope this would make this one somewhat more urgent. Any update would be greatly appreciated.
Ltd...

Lakehouse2012
02-24-2021, 08:42 AM
Morning LTD,

Ortonville, your practically in my back yard (Rose Township actually)

I wish I could predict timing for these molds, but every time I try, I fail.... I have calls into Miha, but we haven't been able to connect yet. I hope it will be a month or so...

Side note- if you need projectiles in 45 in the mean time, I could cast up for you, PM me if that's an option.


Hello...
Any update on when this might go into production? Given the current shortage on good 45 Bullets (Projectiles); I would hope this would make this one somewhat more urgent. Any update would be greatly appreciated.
Ltd...

rototerrier
02-24-2021, 11:41 AM
Removed

Ltdshooter
03-01-2021, 08:23 PM
Morning LTD,

Ortonville, your practically in my back yard (Rose Township actually)

I wish I could predict timing for these molds, but every time I try, I fail.... I have calls into Miha, but we haven't been able to connect yet. I hope it will be a month or so...

Side note- if you need projectiles in 45 in the mean time, I could cast up for you, PM me if that's an option.

Hey!
I'm good for bullets for some time but was just wondering when this one might happen as it looks like the perfect 45ACP cast bullet for bring out my 1911's after a long nap! Give me a PM when you have a chance as we are indeed in close proximity and should get together and toss some lead down range. I'm a member over at HGC and from what I can see you are as well.
Ltd...

Lakehouse2012
03-01-2021, 11:18 PM
I couldnt resist bombing my own thread.... :)

Yes Sir, I'm pistol director out there, and also MD for Steel Challenge, 14MAR21 we have the next match if you can make it. I'll PM you next with more contact info, definitely need to throw some lead with ya!



Hey!
I'm good for bullets for some time but was just wondering when this one might happen as it looks like the perfect 45ACP cast bullet for bring out my 1911's after a long nap! Give me a PM when you have a chance as we are indeed in close proximity and should get together and toss some lead down range. I'm a member over at HGC and from what I can see you are as well.
Ltd...

Ltdshooter
03-05-2021, 09:20 PM
PM sent....
Looking forward to hearing back and the March Match.
Ltd...

rcn11thacr
03-05-2021, 10:59 PM
’m in.
4 cavity Smooth side HP (Brass mold) all pins with (Flat base only) (.455)
Redoldspot at gmail dot com

Apologize but I forgot to add... NLG and handles to my order

Lakehouse2012
03-07-2021, 10:00 PM
Thanks Sir, I've got you on the list.


’m in.
4 cavity Smooth side HP (Brass mold) all pins with (Flat base only) (.455)
Redoldspot at gmail dot com

Apologize but I forgot to add... NLG and handles to my order

justindad
03-12-2021, 08:12 PM
Please put me down for a 4 cavity brass mold, smooth side, HP with all pins, flat base, .453 DIA, and handles.

justindad (at) protonmail (dot) com

Lakehouse2012
03-12-2021, 08:51 PM
Please put me down for a 4 cavity brass mold, smooth side, HP with all pins, flat base, .453 DIA, and handles.

justindad (at) protonmail (dot) com

I've got you added!

starbits
03-15-2021, 05:56 PM
Please put me down for a 4 cavity brass mold, smooth side, HP with all pins, flat base, .453 DIA, and handles.

katy2kary at yahoo dot com

Old School Big Bore
03-15-2021, 06:14 PM
Lakehouse - Please include me for a four cavity brass flat base HP with grease grooves, all pins and a set of handles.
cctxsniper AT yahoo DOT com
Has this really been cookin' for three years or is this a re-run?
Ed <><

Lakehouse2012
03-15-2021, 08:39 PM
Please put me down for a 4 cavity brass mold, smooth side, HP with all pins, flat base, .453 DIA, and handles.

katy2kary at yahoo dot com


Lakehouse - Please include me for a four cavity brass flat base HP with grease grooves, all pins and a set of handles.
cctxsniper AT yahoo DOT com
Has this really been cookin' for three years or is this a re-run?
Ed <><

Thanks guys, I've got you both on the list.

Yes, this is really 3 years old, but I will say the first 2 years this one was very slow and didnt get the numbers it needed to go active. The last 6 months have brought this one into Last Call...

critterkillr
03-21-2021, 09:55 PM
Lakehouse if itís not too late Iíll take a brass 4 cavity hollow point mould plain base .453 dia with all the pins. My email is krslates at live dot com Thanks

Lakehouse2012
03-22-2021, 08:35 AM
Lakehouse if it’s not too late I’ll take a brass 4 cavity hollow point mould plain base .453 dia with all the pins. My email is krslates at live dot com Thanks

I've got you on the list!

fdrywkr
04-06-2021, 09:50 PM
Lakehouse2012
Please include me for a brass 4 cavity hollow point mold plain base .453 dia with grease grooves, all the pins plus handles. Email patrnmkr at lhtot dot com.
thank you.

Lakehouse2012
04-07-2021, 12:18 PM
Yes Sir, you are on the list!


Lakehouse2012
Please include me for a brass 4 cavity hollow point mold plain base .453 dia with grease grooves, all the pins plus handles. Email patrnmkr at lhtot dot com.
thank you.

davek8s
04-17-2021, 09:33 PM
If itís not to late can I change my order?

Brass, HP, GC, .453, regular lube groove.


Sent from my iPhone using Tapatalk

Iím #4 on the HP with lube groove list.

Can I change my order to:
HP, .453, no lube groove, flat base


Sent from my iPhone using Tapatalk

Lakehouse2012
04-22-2021, 03:31 PM
Cool, I've got my edit privilege's, and got you modified.


I’m #4 on the HP with lube groove list.

Can I change my order to:
HP, .453, no lube groove, flat base


Sent from my iPhone using Tapatalk

StuBach
05-07-2021, 09:25 PM
Hey Chris, I need another 45 mold like I need another hole in the head but youíve twisted my arm on this one. Please add me for:

4-cav lube groove HP no-GC .453

Tryandstopthisox at gmail dot com

Lakehouse2012
05-09-2021, 10:10 PM
LOL - I hear ya! I've added you on to this GB. Thank you Sir


Hey Chris, I need another 45 mold like I need another hole in the head but you’ve twisted my arm on this one. Please add me for:

4-cav lube groove HP no-GC .453

Tryandstopthisox at gmail dot com

Cord
05-12-2021, 12:26 PM
Sir, Please add me to this buy.....

(Cord) 4 Cav .453 HP Gas Check with Lube Groove all pins (denbay58 at twc dot com)

Thank you !
.

Lakehouse2012
05-12-2021, 10:32 PM
Yes Sir, I've added you to the list!


Sir, Please add me to this buy.....

(Cord) 4 Cav .453 HP Gas Check with Lube Groove all pins (denbay58 at twc dot com)

Thank you !
.

bronte454
05-26-2021, 08:05 AM
I’m number 3 on the list . Thadd3220 , could you please take 1 set of handles off . Thank you

ranger391xt
05-26-2021, 02:56 PM
just curious if there is any idea where this one sits in the queue? I know these things take time but when I see other buys being run that started later and went into last call later it got me curious.

Not complaining....just need to scratch that need a new mold itch....

Sent from my SM-N960U using Tapatalk

Lakehouse2012
05-29-2021, 12:35 PM
Hi Ranger,

Unfortunately I dont have any update on this GB. I will ask Miha when I call him next week. There are several of these GB's that are growing old... All I can say is that the china virus is really affecting Europe still and last I talked to Miha, materials, and labor were in short supply.

My guess is that he is shipping on:
1) molds he already has the cherry for and doesnt need to wait for his supplier to make and
2) non-HP molds, this darn pin issue, his supplier for pins has some other high-paying govt work and he is being continually delayed by this.

I'll post when I know more.


just curious if there is any idea where this one sits in the queue? I know these things take time but when I see other buys being run that started later and went into last call later it got me curious.

Not complaining....just need to scratch that need a new mold itch....

Sent from my SM-N960U using Tapatalk

Capt.Red.44
06-02-2021, 05:58 PM
Lakehouse- put me down for a 4 CAV, BRASS, PLAINBASE, HP, all pins, + handles. .453. Normal lube groove. Capt.tipton at g male, zip 32059

Lakehouse2012
06-03-2021, 08:08 PM
Thanks Capt, I've added you to the list!


Lakehouse- put me down for a 4 CAV, BRASS, PLAINBASE, HP, all pins, + handles. .453. Normal lube groove. Capt.tipton at g male, zip 32059

sukivel
06-09-2021, 10:26 PM
4 cavity brass HP - .453 - PB - smooth side please

inkgardener at gmaildotcom

Lakehouse2012
06-10-2021, 11:57 AM
Thanks, I've got you on the list!


4 cavity brass HP - .453 - PB - smooth side please

inkgardener at gmaildotcom

zeljohn
07-09-2021, 09:48 AM
Please put me down for a 6 cavity Lube Groove Aluminum, (Gas Check) (.455) zeljohnatcenturylinkdotnet

Lakehouse2012
07-09-2021, 07:04 PM
Please put me down for a 6 cavity Lube Groove Aluminum, (Gas Check) (.455) zeljohnatcenturylinkdotnet

Thanks- I've got you on the list!

redriverhunter
07-10-2021, 08:34 AM
jklm98315 at yahoo dot com please put me down for
4 cavity brass HP, GC, .453", all pins, reg lube groove.
rrh

Lakehouse2012
07-10-2021, 06:02 PM
Thanks, I've added you to the list!


jklm98315 at yahoo dot com please put me down for
4 cavity brass HP, GC, .453", all pins, reg lube groove.
rrh

Cowhide
07-10-2021, 10:19 PM
Lakehouse2012 I sent you a PM about this mould ordering. Question on Euro to US dollars for mould cost.

Cowhide
07-11-2021, 06:30 PM
Put me down for one brass 4 cavity regular lube grove HP GC .455" all pins
and MP handles please

mdsleatherworks4u@gmail.com zip code 63640

Lakehouse2012
07-11-2021, 09:54 PM
Put me down for one brass 4 cavity regular lube grove HP GC .455" all pins
and MP handles please

mdsleatherworks4u@gmail.com zip code 63640

Yes Sir, I've added you to the list! If you have anymore questions, dont hesitate to ask me.

Armorguy63
07-12-2021, 08:31 AM
kshafer1@gmail.com

Please put me down for
4 cavity brass HP, GC, .453", all pins, MP handles, smooth
Thank you

Lakehouse2012
07-12-2021, 09:45 AM
Hi Armorguy,

I've put you in but there is one issue with your request: If you want the GC, you can't have it smooth side. When Miha machines these, he has to do the smooth side as a secondary operation, so he goes in and bores out the grooves which also wipes out the GC. Let me know if the GC or the grooveless is more important to you.

Thanks,


kshafer1@gmail.com

Please put me down for
4 cavity brass HP, GC, .453", all pins, MP handles, smooth
Thank you

Armorguy63
07-13-2021, 06:17 PM
Shoot, sorry no GC. Smooth please

Lakehouse2012
07-13-2021, 11:38 PM
Shoot, sorry no GC. Smooth please

No prob, I've modified you to plain base.

cainttype
07-28-2021, 08:41 AM
.453” 6 cav aluminum solid gas-checked, if I’m not too late.

drctml AT yahoo DOT com

Lakehouse2012
07-29-2021, 11:12 PM
.453” 6 cav aluminum solid gas-checked, if I’m not too late.

drctml AT yahoo DOT com

Yes Sir, I've got you on this one as well, thank you!!

zeljohn
10-07-2021, 02:50 PM
Sorry to do this, but please remove me from this group buy.

Thanks

bronte454
10-08-2021, 01:11 AM
Sir , Lakehouse would you be kind as to modify myentry on #3 for thadd3220 to show just 1 set of handles . Just curious have you heard any word from Miha as to the procurement of HP pins or machining in house with another highly trained and skilled machinist ? Thank you for any info .

Lakehouse2012
10-08-2021, 08:09 PM
Sorry to do this, but please remove me from this group buy.

Thanks

No problem, I've removed you.

Lakehouse2012
10-08-2021, 08:10 PM
Hi Bronte, Yes Sir I've modifed it for you.

Unfortunately I haven't been able to get Miha to respond to me and give an update. It's not for lack of trying but he much just be too busy to talk.


Sir , Lakehouse would you be kind as to modify myentry on #3 for thadd3220 to show just 1 set of handles . Just curious have you heard any word from Miha as to the procurement of HP pins or machining in house with another highly trained and skilled machinist ? Thank you for any info .

Lakehouse2012
10-14-2021, 11:28 PM
Hi everyone,

I talked with Miha yesterday, he is very sorry for all the delay in mold production. There are 2 issues he is dealing with, his supplier of the HP pins and a general shortage (and high cost) of raw materials. It's no different in the USA, if you have tried to buy any steel lately, you are in for a real shock... 2-3 times the cost from "pre-covid" pricing.

The GOOD news is, he has a new lathe coming, is supposed to start it's voyage by sea on the 28th and once it arrives and gets setup, Miha will start making his own pins!! Soon this pin-issue will be behind us. Stay patient and keep posted.

-Lakehouse2012

Lakehouse2012
12-21-2021, 03:29 PM
Update for everyone from Miha:

The CNC lathe to make all the pins is now on the ocean, expecting arrival at his shop of 28JAN22. This means that sometime in Feb he'll begin making all the pins. So stay tuned HP molds will start flowing again!

NYBushBro
12-26-2021, 08:27 PM
Is ANYONE interested in the 2-cavity version? I'm an old fart and prefer the 2-cav mold weight for casting.

Ask Miha if he can do this... inquiring minds want to know.

ADDENDUM: if he can, I'd like a .455 plain base smooth side 2-cav HP with all pins.

Lakehouse2012
12-26-2021, 11:51 PM
Ok, I made it so! :)

There are more than enough people to get pin-count on the 4-cav, so I've added the 2-cav option. When he starts making, he will have to contact those directly with the price of this mold.


Is ANYONE interested in the 2-cavity version? I'm an old fart and prefer the 2-cav mold weight for casting.

Ask Miha if he can do this... inquiring minds want to know.

ADDENDUM: if he can, I'd like a .455 plain base smooth side 2-cav HP with all pins.

NYBushBro
12-29-2021, 09:19 AM
ok, i made it so! :)

there are more than enough people to get pin-count on the 4-cav, so i've added the 2-cav option. When he starts making, he will have to contact those directly with the price of this mold.

thanks, lakehouse! Happy new year!

sukivel
12-29-2021, 11:36 PM
Yes, I would rather have the 2 cavityÖ


2 cav FB .453 brass HP with all pins

I am currently #12 on the smooth side listÖ

Thank!


Sent from my iPhone using Tapatalk

Lakehouse2012
12-30-2021, 09:18 PM
No problem. I've modified you over, thanks


Yes, I would rather have the 2 cavity…


2 cav FB .453 brass HP with all pins

I am currently #12 on the smooth side list…

Thank!


Sent from my iPhone using Tapatalk

NYBushBro
12-31-2021, 06:01 AM
Please add my e-mail address: mopedmedic AT hotmail DOT com
(NYBushBro) 2-cav .455 plain base smooth side 2-cav HP with all pins.

Lakehouse2012
12-31-2021, 03:37 PM
Please add my e-mail address: mopedmedic AT hotmail DOT com
(NYBushBro) 2-cav .455 plain base smooth side 2-cav HP with all pins.

Late night updates.... sometimes I forget the important stuff, all updated now, thanks!