PDA

View Full Version : ACTIVE: MP Mold -.459/460 300gr RNFP with HP option



Lakehouse2012
04-21-2018, 11:12 AM
After coordinated working with @schemelschelm we have a new design based on old Accurate and Hensel molds, see thread link below for history.
http://castboolits.gunloads.com/showthread.php?359131-Interest-in-459-460-300gr-Flat-Nose-for-Leverguns

UPDATED - I've added a Gas Check option to this GB

- Casting at .459 or .460 (You choose)
- Flat base or Gas Check (You choose)
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handles (NOT included but you can add for an +$20)
- Sample of sprue lube is included (15ml)
- HP offering (Pins are Penta, Large, small and blanks)

Lube groove casts 316gr with WW
Hollow Point casts 297gr with WW

Click image for larger version.

219125 219115

Prices are with shipping included, below.

- 4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
- 4 Cavity Solid Brass - 95 Euro's (80,75 Euros with discount)
- 6 Cavity solid Aluminum - 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

Group Buy List

4 cavity HP (Brass mold) with (Gas Check or Flat base) (state size .459 or .460)
1) (jessdigs) - 4-cavity brass HP, .460, NLG, all pins + handles - Jessdigs at gmail dot com
2) (schemelschelm) - vefa01-raps (at) freenet (dot) de - 4 cavity HP, .460, Flat Base
3)
4) (lawerenceA) - 4-cav .460 HP w/all pins, flat base - lawrenceamato all one word at yahoo dot com dot au
5) (hicard) - hicard21atoutlookdotcom - 4 cavity brass, .460 dia. all hp pins, GC & + handles
6) (Lakehouse2012) - sorgatz At Ameritech d0t net - 4 cav HP, .460, GC - (Honcho Mold)
7) (rancher1913) - (forumname)@yahoo.com - 4 Cav HP .460 plain base
8) (target4fun) - .459 PB, 4 cavity, HP all the pins, brass
9) (gmsharps) - 4 cavity HP, FB, .460 - gmsharps at cs dot com
10) (tradbear55) - 4 cavity brass HP, GC .460 - bluewrench75 at gmail dot com
11) (DeputyDog25) - 4-cavity brass .460, HP all pins Flat base + handles - sfsalyers at outlook dot com - zip-32040
12) (Evoken) - 4 cav hp, flat base, .460, all pins. +Handles - kshj31 at yahoo dot com
13) (schemelschelm) - 4 cavity solid brass, flat base, Dia .460 - vefa01-raps (at) freenet (dot) de
14) (Rob870) - 4-cav .459 HP w/all pins, flat base - rob1976dart at gmail dot com
15) (CLAYPOOL) - 4 cav brass HP, 460, GC, all pins, + handles - claypool at frontier dot com
16) (Tazman1602) - 4 cav .460 HP, GC (penta) + handles - Philo187 AT YAHOO DOT COM
17) (Sc0) - 4-cav .460 HP w/all pins, flat base - i v t d i at yahoo dot c o m
18) (FLYCUTTER) - 4 cav brass, HP, GC, .460 all pins - R_karkATattDOTnet
19) (Humbo) - 4 Cav HP Brass, GC, .459" - bardisattva at gmail dot com
20)
21)
22)
23)


4 cavity Solid (Brass mold) with (Flat base or Gas Check) (state size .459 or .460)
1)
2)
3)
4)
5)
6)
7)
8)

6 cavity Solid Aluminum, (Flat base or Gas Check) (state size .459 or .460)
1) (Kawacharles) - 6-Cav Solid Alum, Flat Base .460 - kawacharles1973 at g mail dot com
2) (barefooter175) - 6-Cav Solid Alum, Flat Base .460 - winchester1873jjg at gmail dot com
3) (Petander) - 6-Cav Solid Alum, Flat Base .460, NLG plus handles - petander attaboy gmail donut com
4) (BulletsNBows) - 6 cavity aluminum solid PB .460 - nvstickbow At gmail dot com
5)
6)
7)
8)
9)
10)

schemelschelm
04-21-2018, 12:34 PM
Are the prices for real?
If so, please put me down for 1x 4 cavity HP, Dia .459, bevel base and 1x 4 cavity solid, flat base, Dia .459.

vefa01-raps (at) freenet (dot) de

Lakehouse2012
04-21-2018, 03:30 PM
I spoke to Miha- he confirmed that he will get 4 cavities into the mold, the costs are now correct, and there WILL be Penta pins along with the other pins.


Are the prices for real?
If so, please put me down for 1x 4 cavity HP, Dia .459, bevel base and 1x 4 cavity solid, flat base, Dia .459.

vefa01-raps (at) freenet (dot) de


Aren't those are the two cav prices? IIRC, I don't think he likes putting 4 of the big HP's in one mold block.

bluejay75
04-21-2018, 03:37 PM
I spoke to Miha- he confirmed that he will get 4 cavities into the mold, the costs are now correct, and there WILL be Penta pins along with the other pins.

The Penta is the small pin. Its either or not both is what Im tracking.

Lakehouse2012
04-21-2018, 03:48 PM
The Penta is the small pin. Its either or not both is what Im tracking.Not sure where you received that info? It's not correct. There will be 4 pin types with this mold.

Sent from my SM-G950U using Tapatalk

bluejay75
04-21-2018, 04:05 PM
Youre not accounting for a cup point. Some may want that. If the cup point is listed...the small pin becomes the penta if desired.

So Im thinking that your info is wrong unless you plan on excluding the cup point.

schemelschelm
04-21-2018, 08:37 PM
Ok, great . So please put me down for 1x 4 cavity HP, Dia .459, bevel base and 1x 4 cavity solid, flat base, Dia .459.

vefa01-raps (at) freenet (dot) de

Lakehouse2012
04-21-2018, 08:44 PM
Thanks Sir, I've got you on the list.


Okay, I'm in.

4-cav .460 HP flat base mold please. all pins. [smilie=s:

shutupandjump at yahoo dot com

Lakehouse2012
04-21-2018, 08:46 PM
Ok, great . So please put me down for 1x 4 cavity HP, Dia .459, bevel base and 1x 4 cavity solid, flat base, Dia .459.

vefa01-raps (at) freenet (dot) de

Thanks! I've got you on the list!!

schemelschelm
04-22-2018, 06:17 PM
@Lakehouse
Is there a chance to add a GC-Option? Maybe that will raise the interest a bit.

Lakehouse2012
04-23-2018, 09:56 PM
I've updated the ad to include a Gas Check, thanks for the suggestion. But the Bevel Base option had to be removed. Will you tell me which you would prefer?


@Lakehouse
Is there a chance to add a GC-Option? Maybe that will raise the interest a bit.

schemelschelm
04-24-2018, 12:18 AM
Right, please cancel my order for the 4 cavity solid and put me down only for one 4 cavity HP, .459, flat base. Thanks!

Lakehouse2012
04-24-2018, 06:55 AM
Right, please cancel my order for the 4 cavity solid and put me down only for one 4 cavity HP, .459, flat base. Thanks!I've got you updated.

Sent from my SM-G950U using Tapatalk

Lakehouse2012
05-03-2018, 08:22 PM
Mid-week bump...

Sent from my SM-G950U using Tapatalk

Lakehouse2012
05-06-2018, 06:31 PM
We aren't getting much activity on this one. I've started a new thread on a different 45-70 boolit that Miha already has the cherry for. Would this work for you guys that have already shown interest?

http://castboolits.gunloads.com/showthread.php?360441-462-Hammer-GC-330gr-Mihec-Cramer-HP-(RERUN)


Ok, great . So please put me down for 1x 4 cavity HP, Dia .459, bevel base and 1x 4 cavity solid, flat base, Dia .459.

vefa01-raps (at) freenet (dot) de

schemelschelm
05-08-2018, 01:49 AM
So you stopped the GB?

Lakehouse2012
05-08-2018, 05:51 AM
So you stopped the GB?Oh no.but Hatch changed the rules for active group boys, so this one goes back to discussion until there is more interest

Sent from my SM-G950U using Tapatalk

Fastleo
05-12-2018, 08:31 AM
I’d be interested if this was a copy of the rcb 45-300 fn with a hp option, I think that would move the buy along too

Teemu
05-12-2018, 12:49 PM
4-cavity brass HP all pins .460 Flat base

paska_10 at hotmail dott comm

Lakehouse2012
05-12-2018, 06:15 PM
Thanks, I've got you down!
4-cavity brass HP all pins .460 Flat base

paska_10 at hotmail dott comm

Sent from my SM-G950U using Tapatalk

Lakehouse2012
05-13-2018, 06:42 AM
Fastleo- While this wasn't the exact design used to create, and I dont have the design dimensions to copy it, this is a VERY close design. Here is a pic for reference:

What do you think, should I reference this design in my subject-line?

220332 220333


I’d be interested if this was a copy of the rcb 45-300 fn with a hp option, I think that would move the buy along too

schemelschelm
08-13-2018, 03:57 AM
Monday bump!

Lakehouse2012
08-26-2018, 11:15 PM
Sunday bump, this will be a great shooter!

Sent from my SM-T580 using Tapatalk

FLYCUTTER
11-11-2018, 08:44 PM
I'm in on this ! 4 cavity brass w/pins,.460 dia. hp, GC & handles.

RunderscoreKARKatATTdotNET

Lakehouse2012
11-12-2018, 09:21 PM
I'm in on this ! 4 cavity brass w/pins,.460 dia. hp, GC & handles.

RunderscoreKARKatATTdotNET

I've added you to the list, Thank you!

hicard
11-14-2018, 05:04 PM
I'll take a 4 cavity brass w/pins,.460 dia. all hp pins, GC & handles. hicard21atoutlookdotcom

Lakehouse2012
11-19-2018, 09:25 PM
I'll take a 4 cavity brass w/pins,.460 dia. all hp pins, GC & handles. hicard21atoutlookdotcom

Thanks hicard, I've added you to the list! :)

schemelschelm
02-07-2019, 02:54 PM
Thursday bump!

Lakehouse2012
02-07-2019, 04:20 PM
Thursday bump!

Thanks for the reminder, I have moved my mold over to HP, so there are 6 orders, we need 6 more HP to send this one to active!

sfcairborne
02-18-2019, 06:54 PM
I'm in:
.460 HP Brass all pins GC 4 Cav
Mywhitty1@yahoo.com

Will this work for a light weight 45/70 round. Looking for a 300-330 HP

Lakehouse2012
02-19-2019, 12:12 AM
Hi SF,

Yes this will absolutely work for 45-70. Depending on your rifle, you will have to determine the best OAL, but its definitely a great light load.

Thank you, I've added you to the list.


I'm in:
.460 HP Brass all pins GC 4 Cav
Mywhitty1@yahoo.com

Will this work for a light weight 45/70 round. Looking for a 300-330 HP

Fastleo
02-22-2019, 01:46 AM
What is the commitment number to move this along? I forget...

Lakehouse2012
02-22-2019, 09:59 AM
What is the commitment number to move this along? I forget...

I need 5 more (12 ) to move this thread into "Active" status, and then it needs 25 for last call.

Target4fun
03-12-2019, 10:32 AM
Im in .459 PB, 4 cavity, HP all the pins, brass

Sent from my SM-G965U using Tapatalk

Lakehouse2012
03-12-2019, 11:24 AM
Im in .459 PB, 4 cavity, HP all the pins, brass

Sent from my SM-G965U using TapatalkThanks Sir, ive added you.

Sent from my SM-G920V using Tapatalk

Kawacharles
03-22-2019, 04:58 PM
I'm in: 6-Cavity Solid Aluminium Flat Base .460

kawacharles1973 at g mail dot com

Lakehouse2012
03-22-2019, 05:59 PM
Thanks Kawa - I've added you to the list!


I'm in: 6-Cavity Solid Aluminium Flat Base .460

kawacharles1973 at g mail dot com

schemelschelm
03-25-2019, 03:00 AM
...one 4 cavity HP, .459, flat base. Thanks!

@Lakehouse, please change my order from dia. .459 to .460.
Thanks!

Lakehouse2012
03-25-2019, 11:34 AM
4 more HP molds and this one goes to Active, who else is ready to sign up?...


I've updated you on the list.



@Lakehouse, please change my order from dia. .459 to .460.
Thanks!

schemelschelm
03-26-2019, 03:19 AM
Thank you, Lakehouse!

rancher1913
03-26-2019, 06:54 AM
im in

4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
460 plain base (forumname)@yahoo.com

sfcairborne
03-26-2019, 08:48 AM
Gotta take me off, thank you

Lakehouse2012
03-27-2019, 12:19 AM
Thanks Rancher, I've added you in place of SFC

No problem SFC, I've removed you from the list.


im in

4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
460 plain base (forumname)@yahoo.com


Gotta take me off, thank you

Beagle333
06-27-2019, 10:02 PM
Is this one still happening?

Lakehouse2012
06-27-2019, 10:21 PM
Is this one still happening?

I'd like to see it make production, but it's had a 1-year birthday with 8 out of the required 25 HP buyers to get it in front of Miha. There must be a few more 45 loaders that need a new variant mold?...

gmsharps
06-27-2019, 10:51 PM
4 cavity HP (Brass mold) with ( Flat base) (size .460)
.460, 4-cavity brass HP all pins Flat base gmsharps at cs dot com

Lakehouse2012
06-27-2019, 11:09 PM
4 cavity HP (Brass mold) with ( Flat base) (size .460)
.460, 4-cavity brass HP all pins Flat base gmsharps at cs dot com

Thank you Sir, I've added you on to the list!

Lakehouse2012
06-27-2019, 11:11 PM
Im in .459 PB, 4 cavity, HP all the pins, brass

Sent from my SM-G965U using Tapatalk

Target - I need your disguised email please.

tradbear55
06-28-2019, 07:13 AM
bluewrench75 at gmail dot com, 4 cavity brass HP, GC .460

Lakehouse2012
06-28-2019, 07:36 AM
Thanks Sir, 2 more and this goes into the active!!

jughead76
06-30-2019, 05:45 AM
4 cavity brass solid- 459 GC

Jay72145@gmail.com

Lakehouse2012
06-30-2019, 07:43 AM
4 cavity brass solid- 459 GC

Jay72145@gmail.comIve added you to the list, thankyou!

Sent from my SM-G920V using Tapatalk

Lakehouse2012
07-09-2019, 12:10 AM
Monday bump

Lakehouse2012
07-09-2019, 08:08 PM
2 more orders and this one goes to active folks!

Lakehouse2012
07-17-2019, 12:26 AM
1 more gets this into Active status!! Who is in?

Lakehouse2012
07-28-2019, 06:54 PM
Sunday bump, another great one that should be further along!

Lakehouse2012
08-19-2019, 11:28 PM
Great HP option here!!

DeputyDog25
08-26-2019, 02:55 PM
I'm in on this ! .460, 4-cavity brass HP all pins Flat base

sfsalyers at outlook dot com zip-32040

Lakehouse2012
08-26-2019, 06:58 PM
I'm in on this ! .459, 4-cavity brass HP all pins Flat base

sfsalyers at outlook dot com zip-32040

Thank you Sir, I've added you onto the list!

Lakehouse2012
08-26-2019, 11:18 PM
One more HP order and this one moves to active!

DeputyDog25
08-27-2019, 06:24 AM
Will you please change my size from .459 to .460 please. Sorry for any inconvenience. I will edit my original post.

Lakehouse2012
08-27-2019, 06:01 PM
Will you please change my size from .459 to .460 please. Sorry for any inconvenience. I will edit my original post.

Yes Sir, I've modified for you.

DeputyDog25
08-27-2019, 06:25 PM
Yes Sir, I've modified for you.

Thank you sir!

DeputyDog25
09-02-2019, 08:25 PM
Will you please add handles to my order. Thanks in advance.

Lakehouse2012
09-02-2019, 10:22 PM
Will you please add handles to my order. Thanks in advance.

Thanks, I've added handles to your order

DeputyDog25
09-03-2019, 10:58 AM
Thanks, I've added handles to your order

Thank you sir!

FLYCUTTER
09-04-2019, 11:01 PM
please remove me off of this group buy. thank you

Lakehouse2012
09-04-2019, 11:06 PM
please remove me off of this group buy. thank you

I've updated you off of the list.

LawrenceA
09-05-2019, 06:31 AM
Still interested
lawrenceamato at yahoo dot com dot au
4-cav .460 HP w/all pins, flat base

Lakehouse2012
09-05-2019, 07:01 AM
Still interested
lawrence dot amato at yahoo dot com dot au
4-cav .460 HP w/all pins, flat baseThanks, ive place you in spot #4.

Sent from my SM-G920V using Tapatalk

LawrenceA
09-05-2019, 07:16 AM
Just noticed I gave you the wrong email
lawrenceamato all one word at yahoo dot com dot au
sorry

Lakehouse2012
09-05-2019, 07:39 AM
Just noticed I gave you the wrong email
lawrenceamato all one word at yahoo dot com dot au
sorryGot that changed

Sent from my SM-G920V using Tapatalk

LawrenceA
09-10-2019, 06:39 AM
Question at the risk of sounding stupid. Where do you crimp it?

Lakehouse2012
09-10-2019, 07:03 AM
Will you answer the question on crimp location please.
Are the prices for real?
If so, please put me down for 1x 4 cavity HP, Dia .459, bevel base and 1x 4 cavity solid, flat base, Dia .459.

vefa01-raps (at) freenet (dot) de

Sent from my SM-G920V using Tapatalk

Lakehouse2012
09-12-2019, 07:50 AM
Miha will only be shipping via DHL from now on and i think no more invoicing, rather youll be notified the order is ready and you purchase (similar pay methods) on his website.

This is going to be a HUGE time saver for

Sent from my SM-G920V using Tapatalk

DeputyDog25
09-13-2019, 09:12 AM
Miha will only be shipping via DHL from now on and i think no more invoicing, rather youll be notified the order is ready and you purchase (similar pay methods) on his website.

This is going to be a HUGE time saver for

Sent from my SM-G920V using Tapatalk

So jut for clarification and since this is my first group buy, are you saying that Miha will let each person on the list know through email that our mold is ready and then we go to his site to complete the transaction?

DukeInFlorida
09-13-2019, 11:42 AM
1) Welcome to the amazing CastBoolits Group Buys, Scott! Best molds you will ever own and use.
2) No, not exactly. The job of the honcho is to gather up pre-orders for MP-Molds. Once enough pre-orders are gathered, the Group Buy gets moved from "Discussion" area to "Active" area. Then, when Miha finally makes the molds, he will post HERE, in this THREAD, that the molds are ready. In a couple of these new threads (new way of doing the paying, that is), he's been posting a link, direct to that mold, on his web site. There' you will just click the ORDER link, pay for the mold, and he will ship it to you via DHL.
3) You are smart to buy a set of his handles with the mold. He gives a discount if you buy the handles at the same time as the mold, and he tucks the handles in the same box with the mold. They both arrive at the same time. You'll have the mold, and the handles in a about 3-4 days after paying on line.

So, welcome again to the custom molds here at CB. Hope to meet up with you in JAX sometime before you make your move.
Orville

PS: Sorry, Chris. Didn't mean to step on toes. Scott is a local gun buddy here in Florida.


So jut for clarification and since this is my first group buy, are you saying that Miha will let each person on the list know through email that our mold is ready and then we go to his site to complete the transaction?

DeputyDog25
09-13-2019, 01:19 PM
1) Welcome to the amazing CastBoolits Group Buys, Scott! Best molds you will ever own and use.
2) No, not exactly. The job of the honcho is to gather up pre-orders for MP-Molds. Once enough pre-orders are gathered, the Group Buy gets moved from "Discussion" area to "Active" area. Then, when Miha finally makes the molds, he will post HERE, in this THREAD, that the molds are ready. In a couple of these new threads (new way of doing the paying, that is), he's been posting a link, direct to that mold, on his web site. There' you will just click the ORDER link, pay for the mold, and he will ship it to you via DHL.
3) You are smart to buy a set of his handles with the mold. He gives a discount if you buy the handles at the same time as the mold, and he tucks the handles in the same box with the mold. They both arrive at the same time. You'll have the mold, and the handles in a about 3-4 days after paying on line.

So, welcome again to the custom molds here at CB. Hope to meet up with you in JAX sometime before you make your move.
Orville

PS: Sorry, Chris. Didn't mean to step on toes. Scott is a local gun buddy here in Florida.

Thanks for clarifying the process for me Orville. I have heard great things about his molds so wanted to get with the program. I’m sure we can get together before we make our move. I’ll PM you in the next few days and see what we can arrange.

Lakehouse2012
09-24-2019, 09:56 PM
PS: Sorry, Chris. Didn't mean to step on toes. Scott is a local gun buddy here in Florida.

Thanks Orville, I've been preoccupied with new job and moving and appreciate you updating the masses!

big bore nut
10-24-2019, 07:19 AM
Big Bore Nut 1 4 cavity brass GC with all pins .460 greggoryashley at yahoo dot com

Lakehouse2012
10-24-2019, 11:13 AM
Big Bore Nut 1 4 cavity brass GC with all pins .460 greggoryashley at yahoo dot comThanks, ive got you on the list

Sent from my SM-G920V using Tapatalk

Bphunter
10-28-2019, 09:04 AM
Put me down for 4-cav .460 HP w/all pins, flat base.
mr.boyd at comcast dot net

Lakehouse2012
10-28-2019, 09:11 AM
Put me down for 4-cav .460 HP w/all pins, flat base.
mr.boyd at comcast dot netYou are on the list, thanks

Sent from my SM-G920V using Tapatalk

DeputyDog25
11-14-2019, 08:56 AM
Is there any word on when this might go to production or if in production when it will ship?

Lakehouse2012
11-14-2019, 11:56 AM
Is there any word on when this might go to production or if in production when it will ship?Hard to speculate, need 25 HP orders to go to production.

Sent from my SM-G920V using Tapatalk

Petander
12-03-2019, 07:02 AM
Hard to speculate, need 25 HP orders to go to production.



Here is one more HP order -if NLG is possible?

Lakehouse2012
12-03-2019, 11:46 PM
Here is one more HP order -if NLG is possible?

Yes Sir, I can put you in for NLG on this order. Just give me a post with all the info.

Thanks,

Petander
12-04-2019, 08:20 AM
Yes Sir, I can put you in for NLG on this order. Just give me a post with all the info.

Thanks,

I just noticed there is no crimp groove so I'll pass this time. My bad,I'm sorry.

Thank you anyway.

jughead76
02-12-2020, 07:28 PM
I’m sorry but could you remove me from this post. I sold my 45-70 so I longer need this mold. Thank you

Lakehouse2012
02-12-2020, 08:37 PM
No problem, I've removed you from the list.


I’m sorry but could you remove me from this post. I sold my 45-70 so I longer need this mold. Thank you

Rob870
03-11-2020, 10:50 PM
I'll take one - 4-cav .459 HP w/all pins, flat base - rob1976dart at gmail dot com

Lakehouse2012
03-13-2020, 07:20 AM
Welcome to the forum and to this GB area. I've added you to the list, Thanks!


I'll take one - 4-cav .459 HP w/all pins, flat base - rob1976dart at gmail dot com

USSR
03-22-2020, 08:18 PM
Yep, lack of a crimp groove makes it a "no-go" for me.

Don

Beagle333
03-26-2020, 07:54 AM
I'm going to back out of this one. I found a 300 grain mold now.
Thanks! Chuck.

shutupandjumpatyahoodotcom

Lakehouse2012
03-29-2020, 09:58 AM
I'm going to back out of this one. I found a 300 grain mold now.
Thanks! Chuck.

shutupandjumpatyahoodotcom

no problem Chuck, I've removed you from the list.

jessdigs
08-16-2020, 02:23 PM
Yes Sir, I can put you in for NLG on this order. Just give me a post with all the info.

Thanks,
If you can do NLG then I'm in.
Jessdigs at gmail dot com .460, 4-cavity brass HP all pins NLG + handles
Thanks


Sent from my iPhone using Tapatalk Pro

CLAYPOOL
08-16-2020, 11:51 PM
4 cavity brass hp, 460, gc, all pins, plus handles...claypool at frontier dot com did i forget any thing..?

Lakehouse2012
08-17-2020, 10:07 AM
Thanks, I added you to slot #1


If you can do NLG then I'm in.
Jessdigs at gmail dot com .460, 4-cavity brass HP all pins NLG + handles
Thanks


Sent from my iPhone using Tapatalk Pro

Lakehouse2012
08-17-2020, 10:08 AM
4 cavity brass hp, 460, gc, all pins, plus handles...claypool at frontier dot com did i forget any thing..?

Thanks Sir, I'd added you to the list

barefooter175
09-03-2020, 08:08 PM
I am interested... one 6-Cavity Solid Aluminium Flat Base .460

Thank you,
James

winchester1873jjg at gmail dot com

Lakehouse2012
09-05-2020, 12:04 AM
Thanks, I've added you on the list!


I am interested... one 6-Cavity Solid Aluminium Flat Base .460

Thank you,
James

winchester1873jjg at gmail dot com

Sc0
09-13-2020, 01:04 PM
1ea brass 4-cav .460 HP w/all pins, flat base; i v t d i at yahoo dot c o m

Lakehouse2012
09-13-2020, 09:27 PM
1ea brass 4-cav .460 HP w/all pins, flat base; i v t d i at yahoo dot c o m

Thanks Sc0, I've got you on the list!

Lakehouse2012
10-12-2020, 12:05 AM
Bumping

Tazman1602
11-10-2020, 12:31 AM
4 cav .460 GC W/HP PINS (penta) and handles.

Philo187 AT YAHOO DOT COM

Hopefully will still be alive when we get the right # of molds!

Art

Petander
11-11-2020, 04:30 PM
Me too,got a hungry Marlin...

- 6-Cavity Solid Aluminium Flat Base .460 plus handles - NLG if possible.

petander attaboy gmail donut com

Lakehouse2012
11-11-2020, 06:56 PM
Thanks Taz and Pet, I've updated you both onto the list! Getting closer on this one!!!

Stay safe!


Me too,got a hungry Marlin...

- 6-Cavity Solid Aluminium Flat Base .460 plus handles - NLG if possible.

petander attaboy gmail donut com


4 cav .460 GC W/HP PINS (penta) and handles.

Philo187 AT YAHOO DOT COM

Hopefully will still be alive when we get the right # of molds!

Art

Lonegun1894
12-02-2020, 02:45 PM
Nevermind. Just noticed the lack of crimp groove and that there's no 2 cavity option. With those additions, I'd be very interested.

Bphunter
12-10-2020, 12:13 AM
Put me down for 4-cav .460 HP w/all pins, flat base.
mr.boyd at comcast dot net

It's been over a year and I've found a good source for 300 gr bullets. Please take me off the list.

Lakehouse2012
12-10-2020, 09:19 AM
I understand, you are removed from the list.


It's been over a year and I've found a good source for 300 gr bullets. Please take me off the list.

Olevern
12-23-2020, 10:48 AM
Lakehouse, is it possible to get two cav. GC and two cav. PB?

sukivel
12-23-2020, 12:49 PM
I wish MP would do a gc/pb mold, but he doesn’t. Maybe if there were enough interest?!


Sent from my iPhone using Tapatalk

Lakehouse2012
12-23-2020, 01:54 PM
Sorry guys, I wish for the same, mixing cavities. But with these being cut on a CNC, it would require a tool change in the middle of the operation, Miha wouldn't sign up to that unless there were at least 25 people that could agree on the same mixing of cavities.... :) It would be like herding cats....


Lakehouse, is it possible to get two cav. GC and two cav. PB?


I wish MP would do a gc/pb mold, but he doesn’t. Maybe if there were enough interest?!


Sent from my iPhone using Tapatalk

schemelschelm
01-01-2021, 10:44 AM
Please put me down for 1x 4 cavity solid brass, flat base, Dia .460.

vefa01-raps (at) freenet (dot) de

blasternank
01-01-2021, 01:46 PM
Can you get a NLG with a GC on this?

Thanks.

Sc0
01-01-2021, 02:23 PM
Correction, I should be listed under the Hollow Point version instead of the solid. Any updates on this run?

Lakehouse2012
01-03-2021, 01:28 AM
Ok, I've added you in slot #13.

Thanks!!


Please put me down for 1x 4 cavity solid brass, flat base, Dia .460.

vefa01-raps (at) freenet (dot) de

Lakehouse2012
01-03-2021, 01:31 AM
Hi,

The NLG process wipes out any grooves in the cavities, so no, if you want NLG, then the mold will only be available in FB. Sorry.


Can you get a NLG with a GC on this?

Thanks.

Lakehouse2012
01-03-2021, 01:33 AM
Correction, I should be listed under the Hollow Point version instead of the solid. Any updates on this run?

Hi Sc0, Thanks for catching my mistake, I've moved you to the HP area.

For updates, not much from Miha going on at moment, their country is locked down like a fort... Hopefully all the molds start moving quickly....

Take care,

Bowhunter73
01-05-2021, 06:22 PM
Please Remove Me From the List (Bowhunter73)- 6-cavity Solid Alum, flat base .459, bow-hunter73 at hotmail dot com As I already have a mold like this Sorry

Lakehouse2012
01-06-2021, 06:16 PM
Put me down for (Bowhunter73)- 6-cavity Solid Alum, flat base .459, bow-hunter73 at hotmail dot com

Yes Sir, I've got you on the list!

Bowhunter73
01-13-2021, 11:22 AM
Please remove me from the list as I already have a mold like this Sorry

Lakehouse2012
01-13-2021, 02:20 PM
Please remove me from the list as I already have a mold like this Sorry

ok, I've update you on the list.

FLYCUTTER
01-30-2021, 01:06 PM
Please put me on the list for a 4 cavity brass, HP., GC, .460 w/ pins
R_karkATattDOTnet

Lakehouse2012
01-30-2021, 03:10 PM
Thanks Sir, I've got you on the list.


Please put me on the list for a 4 cavity brass, HP., GC, .460 w/ pins
R_karkATattDOTnet

big bore nut
02-05-2021, 03:57 PM
Please take me off the list.

Lakehouse2012
02-05-2021, 05:26 PM
I've updated you.


Please take me off the list.

Evoken
07-19-2021, 10:41 AM
I would like to get in on this please. 4 cav hp, flat base, .460, all pins. Handles also.

kshj31 at yahoo dot com

Thanks, Ken

Lakehouse2012
07-19-2021, 01:37 PM
Thanks, you are on the list! I put you in spot #12


I would like to get in on this please. 4 cav hp, flat base, .460, all pins. Handles also.

kshj31 at yahoo dot com

Thanks, Ken

Lakehouse2012
10-14-2021, 11:29 PM
Hi everyone,

I talked with Miha yesterday, he is very sorry for all the delay in mold production. There are 2 issues he is dealing with, his supplier of the HP pins and a general shortage (and high cost) of raw materials. It's no different in the USA, if you have tried to buy any steel lately, you are in for a real shock... 2-3 times the cost from "pre-covid" pricing.

The GOOD news is, he has a new lathe coming, is supposed to start it's voyage by sea on the 28th and once it arrives and gets setup, Miha will start making his own pins!! Soon this pin-issue will be behind us. Stay patient and keep posted.

-Lakehouse2012

Tazman1602
10-15-2021, 12:24 AM
It doesn’t matter how long this takes, these molds are worth every single second!

Art

BulletsNBows
10-20-2021, 08:58 AM
If this is still open please put me down for a 6 cavity aluminum solid PB .460. Email is nvstickbow @ gmail dot com. Thank you

Lakehouse2012
10-23-2021, 08:34 PM
If this is still open please put me down for a 6 cavity aluminum solid PB .460. Email is nvstickbow @ gmail dot com. Thank you

Sorry for the slow reply, I've added you to the list, thanks!!

Humbo
12-13-2021, 04:56 PM
Please sign me up for a 4 Cavity Hollow Point Brass, GC, .459".
bardisattva at gmail dot com
Thanks!

Tazman1602
12-14-2021, 02:24 PM
Hey Lake — if it’s not too late can we make mine a gas check and add a set of handles please? If not no problem.

Many Thanks,

Art

PS— anyone waffling these molds are WAY worth the wait!


Sent from my iPhone using Tapatalk Pro

Lakehouse2012
12-16-2021, 03:07 AM
Hi Humbo and Art, I've got you both fixed up on the GB. Thanks!


Please sign me up for a 4 Cavity Hollow Point Brass, GC, .459".
bardisattva at gmail dot com
Thanks!


Hey Lake — if it’s not too late can we make mine a gas check and add a set of handles please? If not no problem.

Many Thanks,

Art

PS— anyone waffling these molds are WAY worth the wait!


Sent from my iPhone using Tapatalk Pro

Humbo
12-16-2021, 09:36 AM
Hi Humbo and Art, I've got you both fixed up on the GB. Thanks!

Much appreciated, thanks!

Tazman1602
12-16-2021, 10:00 AM
Hi Humbo and Art, I've got you both fixed up on the GB. Thanks!


Thank You!

Art

CLAYPOOL
12-17-2021, 08:28 PM
This looked so good i started to sign up again.....

Lakehouse2012
12-21-2021, 03:28 PM
Update for everyone from Miha:

The CNC lathe to make all the pins is now on the ocean, expecting arrival at his shop of 28JAN22. This means that sometime in Feb he'll begin making all the pins. So stay tuned HP molds will start flowing again!

schemelschelm
01-26-2022, 03:07 AM
Good news!

Lakehouse2012
03-21-2022, 03:04 PM
UPDATE from Miha today - He is doing good and ready to turn on the lathe for making pins this week, he expects to start working on orders this week, we are getting close!

Teemu
03-30-2022, 03:16 AM
I need to get of from this GB. I'm third on 4 cav. HP Brass list. Thanks

Lakehouse2012
04-02-2022, 12:26 PM
I need to get of from this GB. I'm third on 4 cav. HP Brass list. Thanks

Done

Sc0
08-07-2022, 02:18 PM
Any updates?