Win 94 - Floppy Trigger

[garandsrus]

Hi,

I only have one Win 94, so I don't know if my trigger is behaving correct or not, but I don't think it is...

The trigger on my rifle moves back and forth freely. In other words, it flops backwards and forwards when no pressure is on it. When I put pressure on the trigger, the rifle fires without any problems.

My guess is that a spring or some other part that is supposed to hold the trigger to the rear is broken, causing the trigger to flop around. I have not taken the trigger group out as I don't know if this is a normal condition or not.

Assuming that a part is broken, what is the most likely culprit? The rifle is a Win 94 BB in .375 Win, top eject.

Here is a schematic for the Win 94 BB, top eject (http://www.e-gunparts.com/productschem.asp?chrMasterModel=0950z94%20POST%206 4%20TOP%20EJECT%20BIG%20BORE)

Thanks,
John

[Jon K]

It's not broken, it is typical trigger flop, mostly due to the triggerstop spring(right hand side looking down, has been bent to lighten the tension on the trigger return.

Jon