PDA

View Full Version : ACTIVE - MiHec 8mm Sil Rerun 2 & 4 Cavity HP / 6 & 8 Cavity Solid



Wasalmonslayer
03-22-2018, 09:17 AM
Miha is giving the green light on this mold for a rerun.

Thank you to the designer and all past participants in the last buy!

MiHec 8mm Sil brass
This is a sign-up thread for an old GB & BRP mold design........ specifically a heavier cast boolit for the 8mm caliber rifles. This boolit is a gas check design. It casts out slightly above 0.326" and sizes easily to 0.324". Ready to load weight is about 200 gr. dependent on your alloy. It has fit in everything we've tried it in. To date the best load has gotten sub 1 MOA at 100 yds....... due to lack of a good scoped rifle.

The costs will be as follows-

- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)
- 6 Cavity solid Brass (80,75 with discount)
- 8 Cavity Aluminum (80,75 with discount)

Prices and options are to be confirmed by MiHec they may change!

Please give your disguised e-mail address and the number and type of molds you want.

As always these buys can take time please be patient and give grace. Getting upset will not make it go any faster!

The discussion thread is here: http://castboolits.gunloads.com/showthread.php?p=1603627#post1603627

280518280519

Wasalmonslayer
03-22-2018, 09:17 AM
Sign up List

Solid Molds-

1) kawacharles1973 at gmail dot com - 6 Cavity Brass
2) Shawn smc at hot mail dot com - 8 Cavity Aluminum
3) Jay Aich at Hammer Bek dot com - 8 Cavity Aluminum
4) lattanzizxc att gmail dot com - 6 Cavity brass
5) zipporaider1968 at yahoo dot com - 6 Cavity Brass
6) r dot nittritz at telus dot net - 6 Cavity Brass
7) drctml AT yahOO dot COM - 6 Cavity Brass
8) dcasad(at)hotmail(dot)com - 6 Cavity Brass with handles.
9) Ed at trilogy-health dot com - 6 Cavity Brass
10) aveni1955 at yahoo dot com - 6 Cavity Brass
11)
11)
HP Molds

1) scottturknett at hotmail dot com - 4 Cavity HP
2)
3) lattanzizxc at gmail dot com - 2 Cavity HP
4) kc5vtk at comcast dot net - 4 Cavity HP
5) m_worlund at yahoodotcom - 2 Cavity HP
6) ckulyk at telus dot net - 4 Cavity HP
7) Jay Aich at Hammer Bek dot com - 4 Cavity HP
8) zacalldredge at gmail dot com - 2 Cavity HP
9) adamjsmith80 at gmail dot com - 4 Cavity HP
10) Dan esc h n er At Gmail dot com - 4 Cavity HP
11) miamileo3 at yahoo dot com - 2 Cav HP
12) lotar95 at gmail dot com - 4 Cav HP
13) drccac at zoomon dott net - 2 Cav HP
14) Peeeeeeeebeeeeeeslingeratprotonmail dot com - 4 Cav HP
15)
16)
17)
18)
19)

bns454
03-22-2018, 09:50 AM
Is there a drawing somewhere with sizes showing the nose diameters/profile ?

Wasalmonslayer
03-22-2018, 11:19 AM
Is there a drawing somewhere with sizes showing the nose diameters/profile ?

I just attached a couple of photo's

Uncle Dave
03-22-2018, 11:32 AM
Your opinion please - would this be a good mold for both 8mm (Mauser) and 32 WS (94 Win) with the appropriate sizing of course? The picture of the flat nose or hollow point MIGHT make it safe for tube feed rifles. Any actual experience anyone?
Thanks
Uncle Dave

bns454
03-22-2018, 12:40 PM
I just attached a couple of photo's

I worded that wrong,Sorry.Can we know the approximate diameters as cast after that front drive band.

Kawacharles
03-22-2018, 02:05 PM
I'm in: (1) 6 Cavity solid Brass mold.

kawacharles1973 at gmail dot com

Wasalmonslayer
03-22-2018, 05:29 PM
Is there a drawing somewhere with sizes showing the nose diameters/profile ?

I messaged Miha to see if we could get a few specs.

bns454
03-22-2018, 05:50 PM
Thank You !

Wasalmonslayer
03-23-2018, 09:16 AM
Your opinion please - would this be a good mold for both 8mm (Mauser) and 32 WS (94 Win) with the appropriate sizing of course? The picture of the flat nose or hollow point MIGHT make it safe for tube feed rifles. Any actual experience anyone?
Thanks
Uncle Dave

Good morning
I have no personal experience with either of them but maybe someone else will chime in to help out.
I do know it may be a little sketchy in the win 94 tube just for reasons with the bullet being pushed back in the case.
You would have to do a decent crimp to get it to hold.

shawnsmc
03-23-2018, 01:56 PM
I'm in for an 8 cavity. Shawn smc at hot mail dot com

Wasalmonslayer
03-27-2018, 08:52 AM
I'm in for an 8 cavity. Shawn smc at hot mail dot com

Got you on the list

Thank you!

HangFireW8
03-27-2018, 06:05 PM
6 Cavity solid Brass
hang fire w8 atttttt gmail dot com

Wasalmonslayer
03-30-2018, 08:30 AM
6 Cavity solid Brass
hang fire w8 atttttt gmail dot com


Got you down

Thanks!

pistol
04-07-2018, 11:52 AM
lattanzizxc att gmail dot com 6 cavities brass
PS New at group buys, please do inform me as to further steps to be taken... Thanks!

5 RING
04-08-2018, 02:43 PM
sign me up for a - 6 Cavity solid Brass. zipporaider1968 at yahoo dot com

AlaskaScott
04-08-2018, 03:07 PM
I will take a 4 cavity
scottturknett at hotmail dot com

Wasalmonslayer
04-09-2018, 12:35 AM
lattanzizxc att gmail dot com 6 cavities brass
PS New at group buys, please do inform me as to further steps to be taken... Thanks!


Got you on the list.
Now we wait. Nothing else required till Miha mills them and sends you a paypal invoice.

Thank you!

Wasalmonslayer
04-09-2018, 12:37 AM
sign me up for a - 6 Cavity solid Brass. zipporaider1968 at yahoo dot com

Got you fixed up

Thank you

Wasalmonslayer
04-09-2018, 12:39 AM
I will take a 4 cavity
scottturknett at hotmail dot com



4 Cavity hp??
If you want a solid mold it will be a six cavity brass or 8 cavity aluminum.

Please advise

AlaskaScott
04-09-2018, 11:41 PM
Yes, hp. It will come with blank (flat nose) pins too correct?

Wasalmonslayer
04-10-2018, 11:10 AM
Correct it will come with blank pins as well.

Wasalmonslayer
04-10-2018, 11:12 AM
Got you fixed up!

ArmoCaster77
04-27-2018, 10:12 AM
Hello!

Sure - why not! I am in on a HP 2 cavity brass CG with all pins, no handles.

armocaster77 at gmail dot com

Thanks!

Wasalmonslayer
04-27-2018, 03:49 PM
Hello!

Sure - why not! I am in on a HP 2 cavity brass CG with all pins, no handles.

armocaster77 at gmail dot com

Thanks!

Your listed.

Thank you!

pistol
05-14-2018, 02:40 PM
Sorry to be such an "ignoramus", Wasalmonslayer, I was just hit by a doubt: I reside in the EU, like I believe Miha. I guess his invoice (when the time comes) will have to be somehow different. Can/should I inform him of such detail? and how? Mumble, mumble...Thanks for your help!

Wasalmonslayer
05-14-2018, 10:43 PM
Sorry to be such an "ignoramus", Wasalmonslayer, I was just hit by a doubt: I reside in the EU, like I believe Miha. I guess his invoice (when the time comes) will have to be somehow different. Can/should I inform him of such detail? and how? Mumble, mumble...Thanks for your help!

He will send a paypal invoice and that will convert it to your currency.

No worries at all people from all over the world buy his fine molds.

kungfustyle
05-15-2018, 11:24 PM
Is there a need for both? http://castboolits.gunloads.com/showthread.php?358096-Mihec-8mm-Hunter-3-Cav-HP-brass-amp-6-Cav-Brass-or-8-Cav-Aluminum-Solids&p=4352111#post4352111
Looks very similar. Why not merge the two and get this under way?

kungfustyle
05-15-2018, 11:27 PM
2 Cavity HP all pins included 95 Euro's (80,75 with discount)
Either mold http://castboolits.gunloads.com/showthread.php?358096-Mihec-8mm-Hunter-3-Cav-HP-brass-amp-6-Cav-Brass-or-8-Cav-Aluminum-Solids&p=4352111#post4352111
Let's get this going...

Wasalmonslayer
05-16-2018, 12:03 AM
Is there a need for both? http://castboolits.gunloads.com/showthread.php?358096-Mihec-8mm-Hunter-3-Cav-HP-brass-amp-6-Cav-Brass-or-8-Cav-Aluminum-Solids&p=4352111#post4352111
Looks very similar. Why not merge the two and get this under way?

They are similar but not the same.
The sign ups need to happen to make em live.
Tell All your friends we need more 8mm people to sign up.

Wasalmonslayer
05-16-2018, 12:04 AM
2 Cavity HP all pins included 95 Euro's (80,75 with discount)
Either mold http://castboolits.gunloads.com/showthread.php?358096-Mihec-8mm-Hunter-3-Cav-HP-brass-amp-6-Cav-Brass-or-8-Cav-Aluminum-Solids&p=4352111#post4352111
Let's get this going...

Need your disguised email if you want on the buy please.

pistol
05-16-2018, 05:05 PM
Thank you Wasalmonslayer!
Let's see if we can move things along a bit.
Will you please sign me up also for a 2 cavities HP (all pins)? lattanzizxc at gmail dot com

pistol
05-24-2018, 01:39 PM
Thank you Wasalmonslayer!
Let's see if we can move things along a bit.
Will you please sign me up also for a 2 cavities HP (all pins)? lattanzizxc at gmail dot com
Wasalmonslayer,
Just in case you did not notice my previous message: I asked to buy one ADDITIONAL mould.
Thank you.

Wasalmonslayer
05-25-2018, 12:45 AM
Wasalmonslayer,
Just in case you did not notice my previous message: I asked to buy one ADDITIONAL mould.
Thank you.

Sorry about missing that.

You are fixed up now.

Thank you :)

pistol
05-29-2018, 02:22 PM
Thank YOU Monslayer!
Your help is much appreciated. pistol

kungfustyle
06-17-2018, 11:41 AM
4) kungfustyle - 2 Cavity HP Need disguised email addy
sorry about that:
kungfustyle @ hotmail dot com

Wasalmonslayer
06-18-2018, 12:21 AM
4) kungfustyle - 2 Cavity HP Need disguised email addy
sorry about that:
kungfustyle @ hotmail dot com



No worries!
Got you all corrected have a great evening :)

Wasalmonslayer
07-18-2018, 10:02 AM
Midweek bump

kungfustyle
08-09-2018, 09:16 AM
bump, Lets get this going!!!!!!

Wasalmonslayer
08-25-2018, 07:08 PM
Bumpski :)

Wasalmonslayer
09-21-2018, 08:19 AM
Friday bump

mart
10-04-2018, 07:46 PM
count me in. four cavity hp with all the pins.

marty dot weatherup at yahoo DOT com

Wasalmonslayer
10-04-2018, 11:13 PM
count me in. four cavity hp with all the pins.

marty dot weatherup at yahoo DOT com

Got you added.

Thank you!

quasi
10-19-2018, 08:42 PM
2 cavity all pins g.c.

ckulyk at telus dot net

Wasalmonslayer
10-19-2018, 09:34 PM
2 cavity all pins g.c.

ckulyk at telus dot net

You are added

Thank you!

HangFireW8
11-02-2018, 04:02 PM
Please remove me. This Group Buy has outlived the 8mm barrel it was intended for, and the rifle will be a 7x57 soon.

Wasalmonslayer
11-02-2018, 11:33 PM
Please remove me. This Group Buy has outlived the 8mm barrel it was intended for, and the rifle will be a 7x57 soon.

Sorry to see you go.
I completely understand thou!

Wasalmonslayer
11-14-2018, 10:56 PM
Bumpski :guntootsmiley:

Wasalmonslayer
11-23-2018, 10:15 AM
Friday Bump!

8mmFan
11-27-2018, 05:54 PM
Is it too late to get in on this?

8mmFan

Wasalmonslayer
11-28-2018, 01:05 AM
Is it too late to get in on this?

8mmFan

Nope she is still active.
Please get me your disguised email addy and what mold configuration you would like.

Thank you!

Wasalmonslayer
11-30-2018, 11:20 PM
Bumpski

pacomdiver
12-02-2018, 11:08 PM
do you have an ETA of completion? i see this thread has been going on for over 8 months

kungfustyle
12-02-2018, 11:32 PM
The sooner people sign up the sooner we can get this done.

Wasalmonslayer
12-03-2018, 08:09 PM
It’s all about people signing up.
Miha needs a certain amount of hollow point pins to have his sublet make them for him.
Typically he needs around 100 hp pins of one mold type so he can get them made.

bamabound
12-11-2018, 11:57 AM
Put me down for a 2 cavity brass HP with all pins. If tracking is available, my zip code is 35071.

zacalldredge at gmail dot com

Sent from my SM-G955U using Tapatalk

Wasalmonslayer
01-17-2019, 12:00 AM
Updated

quasi
01-17-2019, 01:43 AM
can you change mine to 4 cavity H.P. all pins? ckulyk #6

Wasalmonslayer
01-20-2019, 12:19 PM
can you change mine to 4 cavity H.P. all pins? ckulyk #6

Got you fixed up sir

quasi
01-20-2019, 05:32 PM
thank you fish man .

asmith80
02-06-2019, 11:08 AM
I'm in for a 4 cavity HP

adamjsmith80 at gmail dot com

Wasalmonslayer
02-07-2019, 10:19 AM
I'm in for a 4 cavity HP

adamjsmith80 at gmail dot com

Got you fixed up

Thank you!

Wasalmonslayer
03-12-2019, 09:48 AM
Bump it up

ventilator
04-09-2019, 12:18 AM
6 cavity solid brass.
r dot nittritz at telus dot net

Wasalmonslayer
04-09-2019, 09:05 AM
6 cavity solid brass.
r dot nittritz at telus dot net

Got you added Thank you!

ArmoCaster77
05-28-2019, 07:21 PM
Hello - Unfortunately I need to withdraw from this list as I have parted with the 8MM.

"2) armocaster77 at gmail dot com - 2 Cavity HP"

Thank you as always.

Wasalmonslayer
05-29-2019, 12:00 PM
Hello - Unfortunately I need to withdraw from this list as I have parted with the 8MM.

"2) armocaster77 at gmail dot com - 2 Cavity HP"

Thank you as always.

You are removed :)

Thanks for the heads up

mart
05-29-2019, 10:25 PM
You can remove me as well.

marty dot weatherup at yahoo dot com

kungfustyle
06-04-2019, 07:28 PM
Hate to do it, please remove me from the list. Just bought the hunter mold from MP...Thanks for the suggestion. Good luck everyone.

mart
07-13-2019, 01:17 PM
I'll drop out of this one. marty dot weatherup AT yahoo dot com

Beagle333
07-16-2019, 10:28 PM
I'm in! 4 cav HP please.
shutupandjump at yahoo dot com

Thanks!!!! Chuck.

MostlyOnThePaper
07-17-2019, 07:17 AM
I've been following this for so long I thought I was already signed up.

4cav gc hp with all pins please.

kc5vtk at comcast dot net

Sent from my LG-LS998 using Tapatalk

Wasalmonslayer
07-25-2019, 03:43 PM
You guys are removed and a few new places in those empty spots.

Please verify list for correctness.

Thank you!

AlaskaScott
04-11-2020, 07:35 PM
Dang Gina, I hope a few more step up

jixxerbill
04-12-2020, 02:32 PM
I’m in on another group buy that’s closed. It’s a Miha mold. Does someone let us know when the molds are on his websit for purchase or we just have to keep looking for it ? I ask this question on the buy I’m on and didn’t get an answer. Thanks

bamabound
04-12-2020, 02:55 PM
Iím in on another group buy thatís closed. Itís a Miha mold. Does someone let us know when the molds are on his websit for purchase or we just have to keep looking for it ? I ask this question on the buy Iím on and didnít get an answer. ThanksUsually there will be a notification that emails are sent out. In the group buys I have purchased from before, Miha would send you a invoice to your PayPal. Last group buy it was a link to purchase it and he included a discount code (IIRC).

Sent from my SM-G975U using Tapatalk

jixxerbill
04-13-2020, 08:52 AM
Usually there will be a notification that emails are sent out. In the group buys I have purchased from before, Miha would send you a invoice to your PayPal. Last group buy it was a link to purchase it and he included a discount code (IIRC).

Sent from my SM-G975U using Tapatalk


Yes sir that’s the way it was in the past when I got my group buys. But if you look in group buy discussions the top sticky. It says Miha started using DHL to mail molds and because of that he no longer sends an invoice out.

Leoparddog
04-15-2020, 07:45 AM
If the buy is still open I would like to take a spot for the: 2 Cavity HP all pins included.
email is m_worlund at yahoodotcom

Wasalmonslayer
05-08-2020, 08:55 AM
If the buy is still open I would like to take a spot for the: 2 Cavity HP all pins included.
email is m_worlund at yahoodotcom


Still live and you are added sir.

Thank you!

AlaskaScott
05-28-2020, 11:02 PM
Do both options need to be full before it closes?

DanInCt
10-15-2020, 09:41 PM
4cav gc hp with all pins please
Dan esc h n er At Gmail dot com

bamabound
10-23-2020, 09:49 AM
Do both options need to be full before it closes?Any update on this?

Sent from my SM-G975U using Tapatalk

Wasalmonslayer
10-24-2020, 11:36 PM
Any update on this?

Sent from my SM-G975U using Tapatalk

Will send email and see what the mistro thinks about possible running this one.

Have a good evening!
WS

cainttype
01-04-2021, 08:56 AM
Iím in for a 6 cav solid brass, if itís available... drctml AT yahOO dot COM

Wasalmonslayer
01-06-2021, 10:31 AM
I’m in for a 6 cav solid brass, if it’s available... drctml AT yahOO dot COM

Will add you to the list.

Thank You
WS

FabMan
01-09-2021, 09:00 PM
I couldn’t get the attachment to come up. I did see a picture of it on the old listing.
How would this mold work with old 8mm milsurp rifles? I powder coat and would like to remove the lube grove. How hard is that? I have access to a vertical mill. With gas checks getting scarce, how hard is it to make your own and have them stay on? I would be interested in the 8 cavity option.

AlaskaScott
02-25-2021, 02:32 AM
Pretty easy to make your own gas checks

https://patmarlins.com/


I couldn’t get the attachment to come up. I did see a picture of it on the old listing.
How would this mold work with old 8mm milsurp rifles? I powder coat and would like to remove the lube grove. How hard is that? I have access to a vertical mill. With gas checks getting scarce, how hard is it to make your own and have them stay on? I would be interested in the 8 cavity option.

pack3480
03-29-2021, 08:14 AM
One brass 6 cav solid with handles
dcasad(at)hotmail(dot)com

Wasalmonslayer
03-30-2021, 07:19 AM
One brass 6 cav solid with handles
dcasad(at)hotmail(dot)com

Got you added.

Thank you
WS

Wasalmonslayer
03-30-2021, 07:29 AM
I couldn’t get the attachment to come up. I did see a picture of it on the old listing.
How would this mold work with old 8mm milsurp rifles? I powder coat and would like to remove the lube grove. How hard is that? I have access to a vertical mill. With gas checks getting scarce, how hard is it to make your own and have them stay on? I would be interested in the 8 cavity option.


Sorry I missed this you can get ahold of Dave Matteson too he makes a nice gas check maker.
I have a couple and they work well.
I also reattached the pics not sure what happened there but it’s fixed now.

WS

MostlyOnThePaper
03-30-2021, 02:18 PM
Two years!!!

Wasalmonslayer
04-02-2021, 09:58 AM
It’s like fine wine it takes a bit of time :drinks:

Beagle333
05-10-2021, 07:27 AM
HP Molds


2) shutupandjump at yahoo dot com - 4 Cavity HP



Please remove me. I sold this rifle.
Thanks.
Chuck.

rcn11thacr
05-20-2021, 03:07 PM
What are some examples of rifles that this mold would work well for? Yea, little experience with 8mm so I’m asking a dumb question.

Wasalmonslayer
05-21-2021, 09:57 PM
What are some examples of rifles that this mold would work well for? Yea, little experience with 8mm so I’m asking a dumb question.

Sorry no help here on 8mm not my cup of tea just trying to help some guys get one of these for their rifles.

MostlyOnThePaper
05-21-2021, 10:11 PM
Mainly I think 8x57 with some 8mm-06 on the side. Measurements depending I might give it a whirl in the 32-40 for fun. Maybe.

Wasalmonslayer
05-21-2021, 11:04 PM
HP Molds


2) shutupandjump at yahoo dot com - 4 Cavity HP



Please remove me. I sold this rifle.
Thanks.
Chuck.

Got you removed.

Thanks for the heads up
WS

Minerat
05-23-2021, 05:24 PM
Put me on the list for a 2 Cavity HP all pins

SteveOBb at outdrs dot net

Wasalmonslayer
06-24-2021, 11:23 PM
Updated Thanks for being patient

Minerat
07-09-2021, 07:50 PM
Bump up

Kuato
07-18-2021, 08:18 PM
If this is still open id like to be in for a 2 cav hp mold.. hopefully it wont be another 3 years.

miamileo3 at yahoo dot com

Minerat
07-18-2021, 08:38 PM
WS,

Just noticed a mistake in my email address HP#2. Should be SteveOB at outdrs dot net reason too many B's. Thanks Steve

SoonerEd
07-20-2021, 11:27 PM
Please add me for a 6 cavity brass solid

Ed at trilogy-health dot com

Thanks

Kuato
07-21-2021, 05:05 PM
If this is still open id like to be in for a 2 cav hp mold.. hopefully it wont be another 3 years.

miamileo3 at yahoo dot com

3 days later and not added to the list.......

SoonerEd
07-26-2021, 10:21 PM
@wasalmonslayer

Bump

Wasalmonslayer
07-27-2021, 08:44 PM
If this is still open id like to be in for a 2 cav hp mold.. hopefully it wont be another 3 years.

miamileo3 at yahoo dot com

Got you added

Thanks
WS

Wasalmonslayer
07-27-2021, 08:45 PM
WS,

Just noticed a mistake in my email address HP#2. Should be SteveOB at outdrs dot net reason too many B's. Thanks Steve

Got it fixed up sorry about that...
WS

Wasalmonslayer
07-27-2021, 08:46 PM
3 days later and not added to the list.......

Sorry work has been a zoo so my time here is very very limited!

You are fixed up now.

Minerat
07-27-2021, 09:13 PM
Ws, thanks but it wasn't you. I put it in wrong in my original request.:veryconfu

SoonerEd
07-27-2021, 10:59 PM
I think you missed adding me to the list.

Kuato
08-02-2021, 06:36 PM
Sorry work has been a zoo so my time here is very very limited!

You are fixed up now.

no worries, I appreciate it. Thanks!

Wasalmonslayer
08-14-2021, 02:31 PM
I think you missed adding me to the list.

Sorry got you added.

Thanks
WS

Lotar
08-27-2021, 10:49 AM
I'm in for a 4 cav. HP with all the pins.
lotar95 at gmail dot com
I have a question...will be possible to contact Miha when the molds will be ready so that I can add another one he has in stock in the shipping?
Thanks!

Wasalmonslayer
09-18-2021, 02:12 PM
I'm in for a 4 cav. HP with all the pins.
lotar95 at gmail dot com
I have a question...will be possible to contact Miha when the molds will be ready so that I can add another one he has in stock in the shipping?
Thanks!


Got you added.

Not sure on your request you will have to message Miha direct to see if he can accomodate that.

RogerDat
12-08-2021, 09:55 AM
I would be in for a 2 cavity HP brass mold with Gas Check. No Handles drccac at zoomon dott net. I really like the way the Lee bore ride design 8mm shoots and this design seems similar. And heavy. And hollow point. Hopefully will be able to become my "main" 8mm mold.

Imagine same issues with getting materials right now over there as here. Doubt it will be a fast turn around but we are nearly a full list :-)

Wasalmonslayer
12-19-2021, 01:18 PM
Got you added to the list

Thanks
WS

Minerat
02-01-2022, 12:41 AM
2022 bump

AlaskaScott
03-10-2022, 04:56 PM
Are we really just one mold away? If so I would take a brass solid if that would put us over the line.

Wasalmonslayer
03-15-2022, 03:25 PM
Are we really just one mold away? If so I would take a brass solid if that would put us over the line.

That will help us get there but Miha is also working on a project to make pins in house so once that is up and running hopefully things will start to progress along....

Shua
03-23-2022, 08:01 PM
Peeeeeeeebeeeeeeslingeratprotonmail dot com
In for a four cav brass HP please

Wasalmonslayer
04-10-2022, 01:13 AM
Peeeeeeeebeeeeeeslingeratprotonmail dot com
In for a four cav brass HP please


Got you added.

Thanks
WS

Otony
08-05-2022, 11:29 AM
6 cavity brass solid please

aveni1955 at yahoo dot com

Thank you!

Minerat
08-05-2022, 07:23 PM
WS,

I'd like to drop out of this one. #2 on HP list steveobatoutdrsdotnet

Decided to go another route.

Thanks Steve.

Wasalmonslayer
09-05-2022, 03:57 AM
Got you guys fixed up

Thank you
WS