375449 Gc

[msp2640]

Forgive me if this is in the wrong section - I'm looking to feed my CZ 550 in 375 H&H. Anybody willing to sell about 50-75 375449GC's. I'd need them GC'd, lubed and sized. Factory ammo is beating me and the wallet up. I have RCBS dies and some jacketed bullets, but just haven't started loading for it yet. Wanted to try some of those before I invest in a new mould and sizing die. I haven't slugged the barrel, but it's about two years old and I'm lookig to push them around 1500-1800 fps - Thanks to anyone who can help out - Bill

[osage]

Bill have you looked at the Bullshop link at the bottom of this page?

[Larry Gibson]

I understand the cost of componants for large bores. I recently bought a box of 300 gr bullets and thought they were outrageous until I bought a box of 50 Woodleigh's 350 gr bullets!

The 375449 is an excellent bullet in the .375 H&H. I cast them of WWs + 2% tin and water quench. I use a .377 sizer and Hornady GCs. With 32-36 gr of AA5744 velocity is 1702-1872 out of my M70. Accuraycy runs 2-3" for 10 shots with a 2.5X scope. I use Javelina lube.

I suggest you just get the mould and sizer and have at it. Failing that, take a look at Bullshops bullets as mentioned.

Larry Gibson