PDA

View Full Version : Discounted Hazmat at Midsouth Shooters supply for *Shooters World Powder*



AlexAkai
02-16-2018, 09:35 PM
Anyone have any experience with this stuff?

"Free Hazmat when you purchase 4LBS or Half Hazmat with the purchase of 2LBS of SHOOTERS WORLD POWDER" Until 2/20/2018

https://www.midsouthshooterssupply.com/

thegatman
02-16-2018, 09:51 PM
Bought some but haven’t used it yet. They have reloading data on it.

Rcmaveric
02-17-2018, 02:47 AM
All my research says its relabeled Lovex powders, including their website.

NoZombies
02-17-2018, 03:13 AM
I've used a bit of their 'blackout' powder in the blackout, using their data, and had good results. I've probably used 4 or 5 pounds at this point, and I'll buy more when my 8 pound jug runs out.

Beagle333
02-17-2018, 04:46 AM
'Looks like a pretty good deal. I still have lots of odds and ends of powders left over from scrounging what I could find back during the shortage though, so I have to "learn and burn" a bunch of new loads to get rid of these various cans before I buy more unknown powders.

jdfoxinc
02-17-2018, 12:19 PM
Grafs has free hazmat and shipping of powder with purchase of lots of 50lb or 100lb increments of powder.

dverna
02-17-2018, 12:33 PM
I bought a lot (30 lbs) of their pistol powder during the panic when it was on sale IIRC it was about $15/lb.

I have not used it but read good reviews on it and I wanted to be in good shape just in case. I have not used it yet, but will be loading it this year. I do not compete anymore and how bad could it be?

Should add I bought the Clean Shot. I figured even if not a good pistol powder, I could use it up in shotshells.

rototerrier
02-18-2018, 09:08 AM
I now use CleanShot exclusively. Been doing so for about 6 months now. It's good stuff.

4.9gr with 230gr Cast in 45 and 3.7gr with 140gr cast in 9mm.

I was using WIN231/HP38 and dabbled a bit in TiteGroup. After scoring 5lbs for cheap at a gun show and trying it, I bought 10lbs more at the next gun show and it's now all I use.

Load data here: https://shootersworldsc.com/reloading-guide/

I ignore their cast load data since I powder coat. Max on 45ACP/230gr is 5.3. I stopped at 4.9 as it was very accurate, cycled everything I shot it in, and still had plenty of recoil.

Same for 9mm. They show only a max charge of 3.7 and that's what I use for my 140gr boolits. I tried 3.2 all the way up to 3.7. The lighter loads shot fine, but they were just a little too weak for my liking.

I've tried their Tactical Rifle with great success. Buddy of mine has tried their match rifle, also with great success. So far, it all goes boom and doesn't do anything unexpected.