PDA

View Full Version : Gualandi Dangerous game slug



marten
02-12-2018, 10:30 AM
Anyone have any load data for this slug (1 1/8 oz)?
Got loads of bluedot hanging around!

longbow
02-12-2018, 12:49 PM
The BPI slug loading manual has load data for that slug. Not sure if there are recipes using BD or not, I'd have to check.

You might check their Load of the Week archive as well. And the Alliant Powder reloading info.

What hulls and primers do you have.

KrakenFan69
02-12-2018, 07:00 PM
Hoping to find some load data for this with HS-6 myself. Just ordered the Slug manual ( and the Coyote manual) but it'll be a week before it arrives. sigh...

Kraken Fan #69

vzerone
02-12-2018, 08:12 PM
Here's out of BPI's manual for 2 3/4 12 ga roll crimp for the Dangerous Game Slug
1024-214 12 Cheddite Ched209 Longshot 34 Dangerous Game Slug COS12 1 1/8 492 8700 1480
51230-965R 12 Cheddite Ched209 Longshot 40 Dangerous Game Slug COS12 1 1/8 492 10300 1625
110112-2710 12 Cheddite Ched209 PB 28 Dangerous Game Slug COS12 1 1/8 492 8700 1335
31024-215 12 Cheddite Ched209 PB 32 Dangerous Game Slug COS12 1 1/8 492 9700 1490
40401-379 12 Cheddite Ched209 PB 33 Dangerous Game Slug COS12 1 1/8 492 10700 1545
70516-45 12 Fiocchi Fio616 Green Dot 24 Dangerous Game Slug 1 1/8 492 10000 1370
70516-46 12 Fiocchi Fio616 International Clays 23 Dangerous Game Slug COS12 1 1/8 492 9900 1345
51230-965 12 Fiocchi Fio616 Longshot 40 Dangerous Game Slug COS12 1 1/8 492 10300 1625
100520-2117L 12 Fiocchi Fio616 Universal Clays 33.5 Dangerous Game Slug COS12 1 1/8 492 10900 1540
100518-2096 12 Rio Rio209 Green Dot 26 Dangerous Game Slug COS12 1 1/8 492 10500 1400
105018-2097 12 Rio Rio209 International Clays 26 Dangerous Game

Here it is same except folded crimp.

101206-2619 12 Cheddite Ched209 Longshot 38 Dangerous Game Slug 1 1/8 492 9200 1565
100520-2115 12 Fiocchi Fio616 Universal Clays 28 Dangerous Game Slug 1 1/8 492 11000 1520© Copyright 2015 Ballistic Products, Inc. All Rights Reserved
The Slug Manual, 6th Edition
50
Load ID Ga. Hull Primer Powder Grns. Gas Seal Wad Slug Over Shot Slug Wgt. Load Grns. PSI FPS
(BVHFt£w-FOHUIt%BOHFSPVT(BNF4MVHt'PME$SJNQ DPOUJOVFE

100518-2094 12 Rio Rio209 Longshot 38 Dangerous Game Slug 1 1/8 492 10600 1630
100520-2100 12 Rio Rio209 Longshot 39.5 Dangerous Game Slug 1 1/8 492 10900 1670
100518-2098 12 Rio Rio209 PB 29 Dangerous Game Slug 1 1/8 492 11000 1500
100520-2099L 12 Rio Rio209 Unique 29 Dangerous Game Slug 1 1/8 492 10400 1430
100518-2095L 12 Rio Rio209 Unique 31 Dangerous Game Slug 1 1/8 492 11000 1525
100520-2101L 12 Rio Rio209 Universal Clays 29 Dangerous Game Slug 1 1/8 492 11000 1490

vzerone
02-12-2018, 08:18 PM
214076

214077

Maybe this is better to read.

elvas
02-13-2018, 03:33 AM
http://www.gualandi.it/en/tables.html

marten
02-13-2018, 07:52 AM
214076

214077

Maybe this is better to read.

Cool thank you!

marten
02-13-2018, 07:53 AM
http://www.gualandi.it/en/tables.html

Yeah got that, did not find it much use.

vzerone
02-13-2018, 02:25 PM
Cool thank you!

You're welcom marten, I was in the same boat as you with no data so I purchased the BPI slug loading book. It seems when it comes to loading slugs there's not an abundant amount of data out there, at least not free on the internet.

Vince

marten
02-13-2018, 02:33 PM
Thanks again Vince! Fortunately cheddite cases and some longshot on its way!

vzerone
02-13-2018, 03:01 PM
Thanks again Vince! Fortunately cheddite cases and some longshot on its way!

Marten the biggest factor that I found for my slug loading is consistant wad pressure, but I'm using a Foster type slug that I swag and the wads are fiber wads, nitro cards, and plastic powder seals, roll crimp. My shotgun is a Browning BPS with the rifled slug barrel.

If you use different brand hulls as long as the wad depths are the same I don't see much difference in the load. I used Cheddites with the 16mm high brass/steel heads. If you go with RIO's but that primer hole swage from BPI it works great and on all brand loose primer holes. It's fairly cheap and a good investment if you reload shotshells often.

stripercrazy
03-28-2018, 06:24 PM
just got a Russian mold today thans for the info

Scrumbag
12-11-2022, 05:54 PM
Hi Marten, sorry to resurrect an old thread. How did you get on with the Gualandi DGS / Borra?

Best wishes,

Scrummy