View Full Version : paper patching for smokeless powder
Billyspetz
02-06-2018, 02:27 PM
hello i have a m91/30 mosin nagant that slugs to .314 and i am wondering if paper patching allows me to use a .311 or .312 bullet
wmitty
02-06-2018, 04:19 PM
Short answer is no. The bullet needs to be land/bore diameter (or .001 or .002" over) and the patched bullet groove dia. (.314" in your case). Welcome to the madness and check out the paper-patched boolit info a little farther down the contents page.
Billyspetz
02-06-2018, 06:17 PM
thank you very much but also if i get a mold should it be .316?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.