View Full Version : Lyman 356637 147gr 9mm design
jamesp81
02-05-2018, 02:01 PM
Does anyone know if any of the designs from Accurate molds are a copy of the Lyman 356637 mold? Not that I'm married to that particular design, but I have good load data for it.
Considering brass this time instead of aluminum.
jmort
02-05-2018, 02:20 PM
Just ask Tom to make it exactly how you want it
jamesp81
02-05-2018, 02:53 PM
Just ask Tom to make it exactly how you want it
I'd need the dimensions, which I don't have. Anyone here know the measurements?
jmort
02-05-2018, 02:57 PM
Why not ask him???
jamesp81
02-05-2018, 04:22 PM
Why not ask him???
I did. He does not know the dimensions of Lyman 356637.
I'll probably just use 35-147C with no bevel on the base. It looks really close to the Lyman. Close enough I ought to be able to work up a load from it without blowing myself up :D
jmort
02-05-2018, 05:58 PM
That is a great looking design
I bet you will be more than happy
Tom Myers
02-06-2018, 01:24 PM
I did. He does not know the dimensions of Lyman 356637.
I'll probably just use 35-147C with no bevel on the base. It looks really close to the Lyman. Close enough I ought to be able to work up a load from it without blowing myself up :D
I used the Precision Bullet Design ~ Advanced (http://www.tmtpages.com/#advanced) software to produce this sketch and the chart of weights and dimensions from various alloys.
The dimensions were not measured from an actual bullet but were scaled from a photo of a 4 cavity Lyman mold.
I have no idea what the as-cast diameter of the mold would be so I arbitrarily chose an as-cast diameter of 0.358".
The software calculated the weight from Lyman #2 alloy as 146.9 grains, so I believe that the entered values should be quite close to actual as-cast dimensions.
If you so choose, you are welcome to use the sketch as a pattern for a custom mold.
Hope this helps.
http://www.tmtpages.com/LinkSkyImages/forum_images/Lyman%20356637/Lyman_356637_147_gr_Sketch.Jpg
http://www.tmtpages.com/LinkSkyImages/forum_images/Lyman%20356637/Lyman_356637_147_gr_Alloys.Jpg
jamesp81
02-11-2018, 05:49 PM
Very interesting. My thanks.
Shingle
02-15-2018, 08:33 AM
Accurate 45-147 c would be one of the easy ones to load in the 9mm. If you use it in various guns it can be seated deep for tight throats.
trapper9260
02-17-2018, 09:23 AM
That Lyman boolit is my go to in my 9mm. Works great. I also use it in my 357mag and 38spl.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.