686
08-27-2008, 02:08 PM
i bought a lee 150 gr 358 rn fb mold . casted one day a little slow , only using the one 6 cav. mold. the bullets were filled out good. the next day i pushed it . as soon as the spru was hard enugh to cut i did. i cool the spru under a fan. the bullets were not as good looking and when i went to size them some were under size to the point some bands were not tuching the sizer. i know i had it hot but thought it would fill out better . is the bullet srinking in the mold from being to hot? both days i used the same lead mix and pot temp.