Grmps
01-15-2018, 11:15 PM
Prototype Multiple Gascheck seating "jig" for progressive press [Loadmaster]
Trying to find a faster way to seat primers on to boolits for size/crip with a Lee boolit sizing die.
https://i.imgur.com/swvLxuP.jpg
https://i.imgur.com/C6ZeMvM.jpg
https://i.imgur.com/ox9T0mO.jpg
https://i.imgur.com/ri8jEDF.jpg
https://i.imgur.com/P8UNrcE.jpg
https://i.imgur.com/JnEh7fY.jpg
https://i.imgur.com/LSmTIsA.jpg
https://i.imgur.com/oEL2EHQ.jpg
I discovered that it works a little better if you take a small hammer and give all the checks a couple quick taps before dumping and sizing
Trying to find a faster way to seat primers on to boolits for size/crip with a Lee boolit sizing die.
https://i.imgur.com/swvLxuP.jpg
https://i.imgur.com/C6ZeMvM.jpg
https://i.imgur.com/ox9T0mO.jpg
https://i.imgur.com/ri8jEDF.jpg
https://i.imgur.com/P8UNrcE.jpg
https://i.imgur.com/JnEh7fY.jpg
https://i.imgur.com/LSmTIsA.jpg
https://i.imgur.com/oEL2EHQ.jpg
I discovered that it works a little better if you take a small hammer and give all the checks a couple quick taps before dumping and sizing