Battis
01-12-2018, 08:28 AM
Any suggestions for 8mm Lebel revolver bullets? I have brass and dies. The bore measures approx. .327". Graf sells a plated bullet in .330" but that seems too large in a plated bullet (plus, they won't ship to MA, even with a $40 minimum order).
The Lyman mold #32359 can't be found.
I have a Lee mold for S&W .32 but the bullets are way too small in diameter. Lee makes an 8mm rifle bullet mold, but not one for the revolver.
I could keep slugging the bore and load the slugs...
The Lyman mold #32359 can't be found.
I have a Lee mold for S&W .32 but the bullets are way too small in diameter. Lee makes an 8mm rifle bullet mold, but not one for the revolver.
I could keep slugging the bore and load the slugs...