PDA

View Full Version : Wanting some 356404



Wheelgun
01-11-2018, 10:44 PM
I'd like a handful to try out in my Colt Mustang. I'd prefer as cast, but would appreciate any. Will gladly pay or swap what I have for them.
Thanks

This is a discontinued mold weighing around 95gr. A picture can be found here, about 1/3rd of the way down. http://www.three-peaks.net/bullet_molds.htm

340six
06-02-2018, 12:26 AM
I have a mold and was going to use them in My 5.5" Ruger Black Hawk When i cast some I can send ya some. Lubed or As cast? Let me know or PM me so I have ya info. I size 355-356-357 and 358 as I shoot light cast in my 9mm and 38 as well. So can size what ever ya want and lube with White Label Red Carnuba Commercial

James Wisner
06-02-2018, 09:56 AM
I have the Lyman 356632 mould which is the updated 1990's version of that bullet.
Is a little heavier and seems to have a larger meplat.
With my alloy it weighs 103.5 grs as cast, and a diameter of .358

I use it in my .380 ACP ( PPK/S and Browning 1910 ) and as light loads in 38 Spl pistols

If you want any just PM me , I had cast about 1000 of them just a few months ago and have not sized any yet.

JW

Youngtimer
09-25-2018, 06:29 PM
I cast a few thousand of these (356404 95gr) a few months ago, if your still looking I'll send you a bunch. I do not check my cast boolit messages every day, but usually once or twice a week.

JK

Youngtimer
10-13-2018, 08:44 AM
I cast a few thousand 356404 a while ago if your still looking. They are not sized or lubed. Pay shipping and I'll send you a bunch to try. Shoot me a PM if interested.