6x62 Feres dimensions

[nekshot]

Does any one know the dimensions of this cartridge? Every place I looked was in German. A couple of my vz24's are getting home sick for cartridges on their side of the pond! Thanks a ton if you can help me out.

[tsubaki]

Is this any help?
http://www.chuckhawks.com/6x62_6x62R.htm
The 6x62 case is 61.46mm in length and accepts 6mm (.243") bullets.

[nekshot]

Thanks for that lead but I really would like to know the exact cartridge dimensions. I am starting to back off because I wanted it to use the slow surplus powders I have and I think this cartridge is too much of a good thing! Needs a bigger outlet hole.

[tsubaki]

http://www.cip-bobp.org/homologation/uploads/tdcc/tab-i/tabical-en-page11.pdf

[nekshot]

Ahhh thanks, that gives me what I need to know. Appreciate your info!

[ulav8r]

Head diameter of .476, could be made from '06, 270 or 280 brass. Did not convert any other dimensions, but isn't '06 63mm length?