41 MAG Leverguns

[6pt-sika]

I'm intrested to hear what gas check moulds any of you use for the 41 MAG in your Marlin rifles !

I have one of the Lyman 210 grain SWC GC moulds already . Curiouse as to what other's you guys might use [smilie=1:

[felix]

I find that gascheck design boolits are not really needed when sized 413 in the Marlins. ... felix

[6pt-sika]

I find that gascheck design boolits are not really needed when sized 413 in the Marlins. ... felix

You may be very correct !

However I want gas check bullets :drinks:

[missionary5155]

So far I have only used plain base boolits in my Marlin .41.... I move them about 1500 fps and have no problems with leading. 185s up to 240´s´.... my rifle did not like to chamber SWC but a dremel took care of that.

[crowbeaner]

My friend has me cast up the Lyman 410610 for his. Lyman doesn't catalog any checks for it any more, so you'll have to get them from Gator. I had 4000 stolen from my shed with about $7000 worth of other stuff. If anyone bought some this past winter/spring from anyone in CNY I'd appreciate a discreet email. CB.

[Glen]

I like the NEI .410-260-GC (#215F), sized .413", over 19.0 grains of H110 for a little over 1500 fps.

[6pt-sika]

I like the NEI .410-260-GC (#215F), sized .413", over 19.0 grains of H110 for a little over 1500 fps.

That 215F might be a real good choice ! I could also use it in my 40-65 and 40-82 :drinks: