Lee Priming tool

[bigiron]

In need of a small priming pin for the old Lee Auto Prime tool. Called Lee there are no parts available. Anyone have one they don't use?

[jimkim]

Good luck.

[JBinMN]

Maybe give one of the sponsors here a try:
https://www.titanreloading.com/priming-system-parts


This might be the part??
https://www.titanreloading.com/priming-system-parts/lee-ram-prime-small-primer-pin

G'Luck!
:)

[RED BEAR]

Watch evil - bay and snatch them up when ever they are at a reasonable price. Refuse to pay thirty to fourth dollars for a used one. Not sure why they have to improve something that works well to start with. But it almost never fails they must screw up a good thing by improving it.

[Skunk1]

Are you looking for the pin to the one with the tray for primers or the old one with screw in shell holders?

[country gent]

My old round tray lee primer pins were a simple t shaped pin I believe head size was the same and the pusher part was sized to the primer. One wouldn't be hard to turn up for it. If you have the tray you can get the head size and then the rods size from it. If theres a machine supply store that specializes in machinists supplies a ejector or core pin may be found that only needs to be cut to length even. core pins are 60 rc thru and ejector pins are case hardened so you want to get it in the right size. If you go this route.
Another way may be a allen head machine screw if the head and shank can be found in the correct dia.

[rockshooter]

PM sent- I have some extras
Loren

[Honcho]

BigIron, I also have a few extras that I had bought from Lee, from the older, round primer holders, I must have 5 or 6 of these priming tools, so there has got to be a spare SP pin in my box of parts.