View Full Version : 7mm cast bullet mold recommendations
15meter
12-05-2017, 09:38 PM
I am considering 287-168-RF 2 cavity GC. Did a search and found some older posts, looks like a good mold. Any new opinions after use?
Looked at the 287-150, it has a much larger meplat.
Biggest concern is feeding from the magazine.
Thanks
MT Gianni
12-06-2017, 01:04 AM
7 TCU or 7mm Mashbourne? I am not sure which manufacturer yo are looking at either, NOE?
The 7mm Hunter shoots well for me in 7mm08 and 7/30 Waters. Both are ss TC rifles, an Encore and a Contender. I can't help with feed issues.
15meter
12-06-2017, 10:58 AM
These are for a couple of Mauser action in "275 Rigby" alias 7x57. Biggest concern is feeding from the magazine.....single shot wouldn't matter.
That is NOE's part number, should have clarified that, sorry.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.