need 100gr 32 auto load

[jr81452]

does anybody have a load for 32 auto using 100gr RN boolits and accurate #2, #5, or #7? it would really help me out if i didn't have to buy another mold and or powder at the moment. please don't post stiff loads as i'll be using this in a FN 1910.
thanks
jason

[jr81452]

anyone?

[NickSS]

The only thing I ever loaded other than jacketed bullets was some 77 gr cast lead with 2.2 gr of Red Dot. Worked about like factory hard ball. A 100 gr boolit may be too heavy for the 32 auto.

[tejano]

I got the loads below from another shooter who posted them on another forum. He shoots them with Hornady swaged 90 gr. SWC in a Walther PP. Since I have a PP as well, I tried them all and they worked fine just as he said they would. They worked equally well in my CZ83.

1.7 grains of Bullseye for ~800 fps
2.0 grains of W231 for ~850 fps
2.0 grains of Unique for ~800 fps
2.4 grains of Herco for ~800 fps

:mrgreen:

[imashooter2]

That would have been me... I particularly like the Herco loads and have shot thousands of them with complete satisfaction.

Anyway, I saw this thread on the OP's first bump, but didn't reply since I was shooting lighter bullets and didn't use the powders desired.

[jr81452]

well by messing with the alloy i managed to get this mold to cast at 95gr. i might be able to get it a little lower. AA# 5 runs a little slower than Herco. so maybe i can run 1.8- 2.0gr #5 behind a 95gr RN? anybody have quickload :) ?