I need a favor

[GOPHER SLAYER]

If you own a Little Dandy powder measure I could use your help. My friend made me two rotors for mine and he did a great job but now I need to drill them for the powder chamber. What I need is the size of the powder chamber for #s 11 and 16, both the width and depth. Thanks

[rockshooter]

pretty close will be:
#11= 0.315 diameter, 0.425 deep
#16= 0.585 diameter, 0.425 deep
Loren

[rockshooter]

oops!
#11= 0.315 diameter, 0.545 deep
Loren

[Minerat]

I checked mine just to verify.

#11=0.311 dia x 0.544 deep
#16 = 0.450 dia x 0.426 deep (triple checked)

I use RCBS metal dial calipers not pin gauges for the diameter.