Grmps
11-25-2017, 08:35 PM
It's easier to line up the sides and re-assemble if you:
1) Take the valve assembly off, DON'T LOSE THE WASHERS, Dont remove the other top screws (they help keep the side aligned)
2) Take the base off
3) unscrew the bottom and slide down
4) remove the front panel and squeeze grove together
5) Reassemble
(I didn't show all the steps)
https://i.imgur.com/1Zpx2jf.jpg
https://i.imgur.com/SP5d1OL.jpg
https://i.imgur.com/DbaR2u0.jpg
https://i.imgur.com/T276Zmo.jpg
https://i.imgur.com/6HTAfXO.jpg
https://i.imgur.com/JLGoZhG.jpg
https://i.imgur.com/ef4Ab78.jpg
1) Take the valve assembly off, DON'T LOSE THE WASHERS, Dont remove the other top screws (they help keep the side aligned)
2) Take the base off
3) unscrew the bottom and slide down
4) remove the front panel and squeeze grove together
5) Reassemble
(I didn't show all the steps)
https://i.imgur.com/1Zpx2jf.jpg
https://i.imgur.com/SP5d1OL.jpg
https://i.imgur.com/DbaR2u0.jpg
https://i.imgur.com/T276Zmo.jpg
https://i.imgur.com/6HTAfXO.jpg
https://i.imgur.com/JLGoZhG.jpg
https://i.imgur.com/ef4Ab78.jpg