View Full Version : WTB 30-06 commercial blem cases for 45 ACP Shotshells
millsa2
11-12-2017, 09:43 PM
I have got all the Brass I need for now.
Thanks
Alton Mills
.................................................. .................................................. .....
Gunfreak25
11-12-2017, 09:51 PM
I’m interested in some too
Sent from my iPhone using Tapatalk
edwardware
11-12-2017, 10:13 PM
You realize that any of the -03 family would do about as well, right? .30-03, .30-06, .270, .308, .243, etc.
Bump
millsa2
11-12-2017, 10:41 PM
308 or 243 Would be fine also. Thank You
Alton
Mr_Sheesh
11-13-2017, 02:15 AM
308 family would be superior for 1911's due to the extractor groove (TBH 30-06 do seem to work OK though)
BUCKEYE BANDIT
11-13-2017, 07:04 AM
I've had excellent results with 7.62x51 blanks for donor's . 200 !!! , man there's a winter project.
Also,IMO they cycle better if NOT annealed.
millsa2
11-14-2017, 12:45 AM
You Are so Right. I am changing add to 308. Thank You
Catshooter
11-14-2017, 01:24 AM
millsa2,
I have 40+ .308 cases that I cut off, sized in an ACP die and then sized the front in a .44 mag die. That is so they'd fit into the throat of a 1917 for maximum case length. More shot that way.
I also lathe turned the rims/extractor grooves to allow for moon clipping.
I'll ship 'em to you for $22 if you want.
Cat
kycrawler
11-14-2017, 07:58 AM
I have about 100 commercial range pickup 308 .10 each plus sfrb shipping I would have to count them to get a good total
millsa2
11-15-2017, 04:43 PM
Thanks but using these in a 1911 Auto. Wish I had a Revolver.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.