View Full Version : Mold Handles
redgum
08-13-2008, 10:25 PM
Can anyone confirm that RCBS handles will or won't fit a Lyman Mold?
.38 Special
08-13-2008, 11:02 PM
Well, a quick check shows that the Lyman handles are a little thicker than RCBS where they fit into the blocks. Just a few hundredths or so difference, it looks like, so it wouldn't be too hard to fix, but I don't know if that's the only issue because I didn't investigate any further.
HTH!
dromia
08-14-2008, 02:04 AM
My RCBS handles will fit my Lyman moulds.
My Lyman handles won't fit my RCBS moulds.
tjshooter
08-29-2008, 08:26 AM
My RCBS handles will fit my Lyman moulds.
My Lyman handles won't fit my RCBS moulds.
Thats what I find to be true for me too!
44man
08-29-2008, 09:48 AM
I have several RCBS molds and I use my Lyman handles. I don't remember if I filed them a little though. I do drill more holes to fit larger molds on some handles.
tn gun runner
09-07-2008, 08:05 PM
Yes they interchange . All my handles I numbered , I fit them to a mold and number the mold
that way I get perfect fit everytime . 90% of the time stock handle don't fit correctly .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.