View Full Version : WTT Lead/alloys for 9MM Nickle brass
Grmps
10-19-2017, 04:29 PM
Looking to trade pure 5 BHN, 12 BHN lead or Monotype+CU for 9MM Nickle brass? (Also interested in 32 WS & 7.65 Argentine)
(The 12 BHN is a mix of COWW+Old lead boolits)
I have Monotype in the raw or smelted form.
Smelted Monotype Tested By BNE
Sample #1
Pb = 72.0%
Sb = 17.6%
Sn = 9.4%
Cu = 1.0%
Sample #2
Pb = 73.0%
Sb = 16.7%
Sn = 9.4%
Cu = 0.9%
Looking for 1,000 cases to convert to 9X18 MAK
Let me know what you would want in trade for them.
Naturally, I will go with the best deal I will consider doing 2 lots of 500
JIm
RogerDat
10-19-2017, 05:43 PM
I'm not sure how many I have not anywhere near 1000 but it is less than coffee can full not sure how many are nickel. I'll check and send a PM to let you know what I find.
baogongmeo
10-19-2017, 07:43 PM
If your not in a hurry I can search through my stash but it will probably be 3 weeks or so and even then I'm not sure that I can come up with 1000... but... hey 25 or 30 coffee cans full that's only 40 or so per can... I would REALLY like some of your monotype.
Let me know and I'll start going through cans at night... my Mrs. will love it!
whtsmoke
10-19-2017, 09:10 PM
GRMPS, I just might have that many in nickel, I will have to check(count) them tomorrow afternoon when I get home from work and let you know, bought them and never used them.
Dpmsman
10-20-2017, 12:25 AM
I also might have 1000. For sure 500. I'd be interested in some soft lead.
hardcase54
10-20-2017, 01:35 AM
GRMPS I have a small flat rate box full hiding on my bench, pm me your address and I'll send them to you.
BK7saum
10-20-2017, 10:48 PM
If you are still looking for/needing nickel 9mm, pm me, but sounds like you might be taken care of already.
Grmps
10-21-2017, 12:39 AM
Thanks for your responses.
Please PM me with how much of what lead /lead alloy you want for how many cases.
https://i.imgur.com/SO0mFi9.jpg?1
https://i.imgur.com/ipRALLu.jpg?1
Grmps
10-21-2017, 03:34 PM
Several people interested, BUT:
I'm Still looking for an offer!
Also interested in 32 WS brass
Please PM me with how much of what lead /lead alloy you want for how many cases.
Thanks
Jim
Grmps
10-22-2017, 04:40 PM
Sunday bump
Grmps
10-23-2017, 05:11 PM
Monday bump
Please PM with an offer if interested.
Grmps
10-24-2017, 01:58 PM
https://i.imgur.com/idusSQD.jpg
https://i.imgur.com/5erXBzy.jpg
https://i.imgur.com/7yfDzGP.jpg
https://i.imgur.com/OpFWKb0.jpg
Grmps
10-26-2017, 08:13 PM
please close this thread
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.