Any one use Saeco 224 moulds?

[Lee W]

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=102179

I plan on casting a bunch of 223 boolits and the RCBS mould I have needs to be retired.
They also have the four cavity mould I would get over the 2 cavity.
I plan using them in a Mini-14 with 18 grains IMR4895 and I feel I need many, many boolits for testing. :lovebooli

[felix]

Should be excellent for a 12 twist auto. ... felix

[Lee W]

Felix,
You got me thinking, I have no idea what the twist is on the mini.
I took a cleaning rod and marked it, I pushed it into the barrel for one full turn then measured it, I got 1:9.
The 60 grain boolit should do quite well in it.

[Lee W]

1.5 hours from finding it till ordering it. I need to step away from the credit card.
:groner:

[C1PNR]

1.5 hours from finding it till ordering it. I need to step away from the credit card.
:groner:
Only question I have is - Did you stop at that one item?

I'm looking for a 12 step program that will help me to click on "Check Out" with only one item in my "Shoping Cart!":wink:

You know how it goes: Heck, I've got to pay shipping anyway, might as well get that other thing I need (want!), and, oh yeah, there's this 'nother thing, too! "Honey, just think of all the shipping charges I'm avoiding!":lol:

[Lee W]

I had the feeling I needed to buy more, but I stopped...
I could have purchased gas checks, but I am on the list for Gator checks.
I have about .5 ton of ingots, so lead is not needed.
I also have close to a lifetime supply of brass....


:Fire: Put down the credit card and take one step back!