WTS; DIES Hornady, RCBS, Lyman, C&H

[GoodAlloy]

Please post here that you "will take it" and follow up with PM for payment details.
Thanks guys! PRICE REDUCED ON THE 44mag dies, they are the only ones left.


Hornady new dimension die set in 44 Special / 44 Magnum with titanium ring size die. Same principal as carbide ring as you do not need to use lube to size cases. Die set has been well used but are in good serviceable condition and work perfect.
$27 shipped.
206139

Lyman 41 Magnum die set with carbide sizer die and M neck expanding die. Complete set of dies for the 41 Magmum or 41 Special.
Die set is in excellent condition.
$40 shipped
SPF TO SSGOLDFART
206140

C&H Tool & Die military crimp removal die set. Die set is new in the box. Comes with stems to remove small and large crimps in brass primer pockets.
$35 shipped.
SPF TO PULL THE TRIGGER
206141

RCBS 30 carbine die set. This is the Carbide size die set. Dies are in excellent condition.
$50 shipped.
SPF TO MTGRS 737
206144

RCBS 9mm carbide die set. Well used but in good serviceable shape. Die set works perfect.
$32 shipped.
SOLD PENDING FUNDS TO IDAHOAN
206145

Lyman old style reloading die set for the 30/30. All parts are there and die set is complete.
$18 shipped.
SOLD PENDING FUNDS TO FIREBYOROLONG
206146

Lyman 38 Special / 357 Magnum die set. Comes with the carbide size die and "M" expander die. Complete die set.
Used but in really good shape.
$32 shipped.
SOLD TO MYTMOUSEMALIBU
206147

[firebyprolong]

I'll take the old style Lyman 30/30 set.

[SSGOldfart]

I'll take the 41 magnum set, with the "m" die. Pm inbound

[mtgrs737]

I would like the 30 Carbine die set. Pm to follow

[pull the trigger]

I would like the military crimp remover please

[RogerDat]

I would like the military crimp remover please I like mine from C&H, I found that a tiny amount of Lee case lube on the expander tip could help with really tight pockets, as could doing a half hard pull to start opening pocket, release pressure, rotate case and do a finish pull to get the expander full depth in pocket. Did notice the rods can unscrew a bit from the base in use and warrant checking for screwed in tight once in awhile.

Nice score bump. :-)

[GoodAlloy]

prices reduced

[pull the trigger]

I like mine from C&H, I found that a tiny amount of Lee case lube on the expander tip could help with really tight pockets, as could doing a half hard pull to start opening pocket, release pressure, rotate case and do a finish pull to get the expander full depth in pocket. Did notice the rods can unscrew a bit from the base in use and warrant checking for screwed in tight once in awhile.

Nice score bump. :-)

Thanks for the tips!! I am pretty excited to try it. Ive wanted one for a while now

[Idahoan]

I will take the RCBS 9MM carbide set, pm sent,

[Mytmousemalibu]

Lyman 38/357 dies: I'll take it!

[GoodAlloy]

Price reduction bump

[GoodAlloy]

Bump to sell the 44 mag dies