NuJudge
10-08-2017, 07:59 PM
I have a S&W 25-2 in .45 acp that has large cylinder throats, .455" at the front but .456" for most of the throat. I saw that Midway had Remington .455" 250 grain bullets, so I bought some:
https://www.midwayusa.com/product/1601446981/remington-bullets-45-colt-long-colt-455-diameter-250-grain-lead-round-nose
I anticipate loading them into .45 Auto Rim brass. Does anyone have experience with this bullet in .45 AR brass, or with the similar Hornady bullet in .45 AR brass:
https://www.midwayusa.com/product/616817/hornady-bullets-45-caliber-454-diameter-255-grain-lead-flat-nose-box-of-200
I am thinking a mild load of Bullseye or 231 should work well.
https://www.midwayusa.com/product/1601446981/remington-bullets-45-colt-long-colt-455-diameter-250-grain-lead-round-nose
I anticipate loading them into .45 Auto Rim brass. Does anyone have experience with this bullet in .45 AR brass, or with the similar Hornady bullet in .45 AR brass:
https://www.midwayusa.com/product/616817/hornady-bullets-45-caliber-454-diameter-255-grain-lead-flat-nose-box-of-200
I am thinking a mild load of Bullseye or 231 should work well.