Availability of .678 round ball mould

[3Gunnah]

I am looking for a .678 round ball mould. I am having little luck finding anything on the internet. It appears Lyman has discontinued making their mould any other suggestions?

[Beagle333]

You could have Jeff Tanner make you one.
http://www.jt-bullet-moulds.co.uk/moulds.html

Or... Track of the Wolf has a .680 that might work.
https://www.trackofthewolf.com/Categories/PartDetail.aspx/1204/1/MOLD-BAG-680

They do sell .678 balls, if you don't need many.
https://www.trackofthewolf.com/Categories/PartDetail.aspx/186/1/BALL-678-X

[3Gunnah]

If we cannot locate a used one our plan is to buy the .600 and have it machined out to .678. We are doing quite a bit of flintlock musket shooting and are sick of paying $0.50 a ball when I have all the casting equipment and lead on hand.

[Hogtamer]

Look in active group buys....MiHec just ran one, prolly has extras, he makes great molds too. Works great in 12 ga wadcup loads to

[longbow]

RCBS 0.678" mould listed on Buffalo Arms site:

https://www.buffaloarms.com/bullet-moulds/round-ball-moulds?p=2

0.662" works well too but generally needs patching to snug fit in shotcup. Donut wads might also do the trick with 0.662" ball.

Longbow