Atlast357
09-15-2017, 10:13 PM
I have settled on using a conversion in my 1858 Remington revolver. I will be using
light loads , this is for fun plinking after all. My plan is push 228 grain RN lead bullet
and use 3f holy black just like the old days.
One concern is the crimping. My loading equipment is Lee , press mold etc.I will see how well
45 ACP seating dies work.
In smokeless cartridges I used no crimp on both 9mm and 45 till discovered bullet movement,
immedialty got a tapper crimp. Problem solved .
The only roll crimp I seem to find is other brands,like RCBS, will they fit a Lee press?
I'm sure this has been discussed before , but can't find it..........
light loads , this is for fun plinking after all. My plan is push 228 grain RN lead bullet
and use 3f holy black just like the old days.
One concern is the crimping. My loading equipment is Lee , press mold etc.I will see how well
45 ACP seating dies work.
In smokeless cartridges I used no crimp on both 9mm and 45 till discovered bullet movement,
immedialty got a tapper crimp. Problem solved .
The only roll crimp I seem to find is other brands,like RCBS, will they fit a Lee press?
I'm sure this has been discussed before , but can't find it..........