.41 Swiss

[Battis]

I pulled the bullet and powder from a very old .41 Swiss cartridge. The bullet is 300 gr, hollow base, and might have been paper patched. It held approx. 14 grs of a very fine powder.
Is there any way to ID the powder or its modern "family" based on its look, size, etc?

[John Boy]

A full box of UMC 41 Swiss ammunition is worth about $150. I wouldn't worry about the powder and not pull any bullets

[Battis]

I want to replicate the load with a slightly heavier bullet and I was wondering what modern powder is equivalent.

[John Boy]

http://castboolits.gunloads.com/showthread.php?115629-10-4x42R-(-41-Swiss)-loads

[Battis]

Yeah, I read that link. I'm trying to figure out what type of powder was used that only required 14 grs.

[mazo kid]

Joe (smokem joe, now deceased) used 12 gr. Of Unique. As usual, start low and work up.

[hpbear101]

203407
I have real good luck with the Lee 310 grain bullet and 18 grains of 2400. I have tried it with GC no GC, lubed or LLO, large rifle and large pistol primes they all seem to shoot just as well.

[Gewehr-Guy]

Philip B. Sharpe's book "Complete Guide To Handloading" shows many comparison photos of obsolete and current powders[1949],also gives detailed descriptions of the powder's history and popular applications. Not having seen your powder, my guess would be SR#80, discontinued in 1939, or maybe DuPont#1204, disc.1935 and later replaced with IMR4227, or it could be a powder that was never offered to the public. Anyone interested in old cartridges and reloading history should get this book