???? about quickloads

[Oklahoma Rebel]

Are they able to figure loads for only Cast boolits, or when you put weight, powder, and charge, are the loads that come up for jacketd boolits? also,does it cost anything to download quickloads?
thanks! still just trying to find the best place to start when I get mu 9.3X62mm, so far I am going to start with about 50-52grs of h380, and work up to 2100fps, maybe a bit more, depending on if I still have accuracy at that speed. I am pretty sure I will, might have to try a few different lubes, but carnauba blue looks nice. thanks!-Travis

[dragon813gt]

You can't download the program. You pay for a CD that will be sent to your house. You have to pay for the program.

It has both jacketed and cast bullets in it. You have the option to create bullet profiles of your own as well. This is what I've done for all my Accurate, NOE, MP and HM2 molds. The program has a lot of customizable options. Just remember that it's GIGO, garbage in garbage out.

[Oklahoma Rebel]

ok, some one was nice enough to do up 2 loads for me, for9.3X62, imr 4895 and H380. the loads came out very sensible, but the differed from the books a bit; using more powder to get the same velocity, though not by much. so I was wondering if there was some inconsistency, or if it was because of the boolit being cast, instead of jacketed. I decided to use H380 and it shows, for a 286gr cast, 55grs=2099 , 2100 was my goal. amd I think the pressure was 36000, so I have rroom either way, this being a 54,000-56,000 psi cartridge. the boolit I will be using is accurates new 37-286c.

[Oklahoma Rebel]

what does GIGO mean????

[dragon813gt]

what does GIGO mean????

Says it right in the sentence; garbage in, garbage out.

[Oklahoma Rebel]

lol, well aren't I observant!