My Contender Long Gun

[OlDeuce]

I jumped in with both feet on this Contender!!! When I bought it it came with a Match 21" .22 LR barrel !! With in the 1st hour I ordered
a 23''Bull Barrel in 30-30 !!! and than I had to have a .44mag barrel so I ordered a MGM 24'' bull barrel !! It was shipped with in 30 minutes
of placing the order !!! WoW now that's Service!!!...............Well the barrel came to my door on the 3rd day !! The 4th day I had it in the lathe
and re-cut the chamber to my .44-56WC !!!!what a sweet shooter !! This is a Great Gun ,easy to handle and the trigger pull is near Perfect compared to my Set Trigger on my 1894 Winchester !!!
https://s20.postimg.org/z4p9kbi0d/IMG_4297_edited-1.jpg (https://postimg.org/image/itp5o05ih/)
https://s20.postimg.org/x5lzerawd/IMG_4294.jpg (https://postimg.org/image/8ccfe3rvt/)

Ol Deuce

[NSB]

Looks like a lot of fun in store. Great service from the barrel company. Let us know how it shoots.

[richhodg66]

I picked up one like that in .17 HMR. Had no real interest in a .17, but the asking price was way too good a deal to pass up.

Man is that thing easy to shoot well! Really nice rifle. Am considering buying an MGM barrel in .22 Hornet or .218 Bee for it eventually. Also considered having it rechambered for .17 Hornet so I could at least reload for it. Not sure yet, but ther are very good rifles.

[OlDeuce]

This was my 2nd go around !!! and I'm a happy camper !!! I've made some changes to my load and I'm ready to re shoot the target to see in the changes
made a difference
https://s20.postimg.org/7e593atbh/IMG_4299.jpg (https://postimg.org/image/6bv2krai1/)

after shooting this target I went back to the loading bench and I dipped and scaled each load!!! did 5..... than the next 5 were loaded with a 1gr increase
to help tighten up the group if this works out than I can go back to the scope for some changes !!!!
We'll see how it responds

Ol Deuce

[quilbilly]

Now you will have to buy another frame (it simply is not proper to have just one). Then you will have to get a couple extra springs and other spare parts from Mike Bellm just in case. I feel for you but you have a ways to catch up with my happy addiction.

[OlDeuce]

Now you will have to buy another frame (it simply is not proper to have just one). Then you will have to get a couple extra springs and other spare parts from Mike Bellm just in case. I feel for you but you have a ways to catch up with my happy addiction.

I'm trying tehehe.............this rifle sure gets in your blood fast !!!! Ol Deuce

[OlDeuce]

I have made the decision on my new Barrel !!! 24'' bull in 25-35... I have over 400 rounds ready to go! dies ,the works it's a no brainer !!! LoL
the thing I need to get is a mold ,spear point around 120+gr.......!!!!

OL Deuce

[OlDeuce]

Now you will have to buy another frame (it simply is not proper to have just one). Then you will have to get a couple extra springs and other spare parts from Mike Bellm just in case. I feel for you but you have a ways to catch up with my happy addiction.

When I tried to fire the 30-30 ,She didn't work ! The hammer spring was flat gone!! It would do the 22 rim fire but not the center fire!! Ordered a 5 pack of
hammer springs from Mike Bellm !! the new hammer spring was what she needed ! now it feels like Brand New !
https://s20.postimg.org/4g88m2965/IMG_4258.jpg (https://postimg.org/image/55r0yf9pl/)

the next Gun part I want to pick up is a thumb hole butt stock !! that should help out!!1

Ol Deuce

[quilbilly]

You might see if you can find a folding Contender carbine stock with the pistol grip as well. Mine has been much admired and makes it ever so portable even if you lose a little (not much) accuracy. I especially like my Choate folder with either my 9mm Luger 18" barrel or my Hornet both with peep sights.

[OlDeuce]

You might see if you can find a folding Contender carbine stock with the pistol grip as well. Mine has been much admired and makes it ever so portable even if you lose a little (not much) accuracy. I especially like my Choate folder with either my 9mm Luger 18" barrel or my Hornet both with peep sights.

Where did you locate the folding stock????? I really like the TPL in 12.5 to 13" it makes for an easy sight picture for me!!! My Shiloh is like 14'' and WoW what a reach ....TGF for a set trigger on that ol'girl LoL

Ol Deuce

[Leadmelter]

Get a 32/20 barrel for some cheap fun.
Leadmelter

[OlDeuce]

Get a 32/20 barrel for some cheap fun.
Leadmelter

Hahaha I've thought of that and my thought is to build a axillare chamber that will fit in the 30-30 chamber !!! I have one for the 32 S&W !!!!
Ol Deuce

[charlie b]

FWIW, try different positions on the bench. None of my short barrel ones (14") liked any pressure from the bags. I would put the trigger guard up against the bag and have as little weight as I could on the forearm. I think putting your hand under the forearm and rest hand on bag might help too (Win 94 shooting 'trick'). The barrels are thin so any deviation on pressure will show up on the target.

[OlDeuce]

FWIW, try different positions on the bench. None of my short barrel ones (14") liked any pressure from the bags. I would put the trigger guard up against the bag and have as little weight as I could on the forearm. I think putting your hand under the forearm and rest hand on bag might help too (Win 94 shooting 'trick'). The barrels are thin so any deviation on pressure will show up on the target.

Charlie.........thats good info.......once I get the load worked up to being a bit more consistent ! I can move on......Randy

[quilbilly]

I "googled" Contender folding stocks and found out they are still available from Choat at about $110. My 10" 32/20 barrel is far and away my favorite Contender pistol barrel. I have never been able to shoot well a pistol with a scope but that 32/20 is very hard on coyotes out to 150 yards with the original iron sights and an MV of 1350. Good enough for me.

[OlDeuce]

I "googled" Contender folding stocks and found out they are still available from Choat at about $110. My 10" 32/20 barrel is far and away my favorite Contender pistol barrel. I have never been able to shoot well a pistol with a scope but that 32/20 is very hard on coyotes out to 150 yards with the original iron sights and an MV of 1350. Good enough for me.

On my spread ...Coyotes are in season 24-7........all the rest of the critters are safe!!! unless a Badger comes in plane view!!! I have a perfect yard for shooting!! I can get 220yds to my SouthWest and I can pick up to 450yds to my south!! Beyond this I have to go to the range!! and thats about 7 miles
to my North LoL !!!

I'm really liking this contender and I will check into the folding stock!!! This chamber is what I'm going to copy and change it to a 32-20 for my 30-30 barrel
https://s20.postimg.org/6u0z0d7n1/IMG_3571.png (https://postimg.org/image/pz48a4max/)

Ol Deuce

[OlDeuce]

Going to shoot my last test tomorrow morning !!! Now that the Eclipse has passed my shooting should get better !:roll:

Ol Deuce

[45workhorse]

Be careful how you store your barrels, if they are to close together, they multiple like rabbits:drinks:

[jmorris]

Yeah, I found it to be a platform where one can dump a lot of money.

You say you have a lathe, if you also have a mill you can save money just making your own barrels.

I machine the lugs complete except the pivot as well as the scope mount screws and ejector slot are machined after I weld them on.

http://castboolits.gunloads.com/attachment.php?attachmentid=202483&d=1503489528

This is a folder 16" .22 I did and a 20 shot group at 60 yards beside the quarter.

http://castboolits.gunloads.com/attachment.php?attachmentid=202484&d=1503489546

This is it below a Remington 510 for scale. It's quite compact folded, even more so without the suppressor on it.
http://castboolits.gunloads.com/attachment.php?attachmentid=202485&d=1503489564

[OlDeuce]

Yeah, I found it to be a platform where one can dump a lot of money.

You say you have a lathe, if you also have a mill you can save money just making your own barrels.

I machine the lugs complete except the pivot as well as the scope mount screws and ejector slot are machined after I weld them on.

http://castboolits.gunloads.com/attachment.php?attachmentid=202483&d=1503489528

This is a folder 16" .22 I did and a 20 shot group at 60 yards beside the quarter.

http://castboolits.gunloads.com/attachment.php?attachmentid=202484&d=1503489546

This is it below a Remington 510 for scale. It's quite compact folded, even more so without the suppressor on it.
http://castboolits.gunloads.com/attachment.php?attachmentid=202485&d=1503489564

Cool Stuff!!! Your plan on the block is Good!! I was thinking of doing that but !!!!! Time .........Do you have Samples of the Block ??? Tehehe:happy dance::awesome:
Ol Deuce

[jmorris]

Yeah, that's how it always is, time vs how much you want to spend.

If you just do a run of them all at once it's not too terrible. Cut the bar stock, mill the slots, drill the holes all one after another with the same stops, etc. Then you just go grab one out of the bag next time you want it.

There are lots more complicated things to make for firearms.

[OlDeuce]

Yeah, that's how it always is, time vs how much you want to spend.

If you just do a run of them all at once it's not too terrible. Cut the bar stock, mill the slots, drill the holes all one after another with the same stops, etc. Then you just go grab one out of the bag next time you want it.

There are lots more complicated things to make for firearms.

JMorris..........WoW you do excellent work !! I only dabble with my lathe/mill and when I do something big I use my friends lathe ....I do my own
chambers, little stuff !!! I really need to venture out and increase my skill level !!! There is lots of good barrels out there !! Time to play !! who said
ya can't have fun at 70 tehehe............:guntootsmiley::Bright idea::awesome::target_smiley::goodpost:

Ol Deuce

[joatmon]

jmorris what type metal would you use for those blocks?
Thanks Aaron

[OlDeuce]

On my spread ...Coyotes are in season 24-7........all the rest of the critters are safe!!! unless a Badger comes in plane view!!! I have a perfect yard for shooting!! I can get 220yds to my SouthWest and I can pick up to 450yds to my south!! Beyond this I have to go to the range!! and thats about 7 miles
to my North LoL !!!

I'm really liking this contender and I will check into the folding stock!!! This chamber is what I'm going to copy and change it to a 32-20 for my 30-30 barrel
https://s20.postimg.org/6u0z0d7n1/IMG_3571.png (https://postimg.org/image/pz48a4max/)

Ol Deuce

I found a 30 carbine die that will do perfect for doing my 32-20 brass to make 30-20 .......this is going to be a fun project I'll
keep ya posted !!!

Ol Deuce

[OlDeuce]

we are going to scrap this idea for bigger and better Powder Burners !!! LoL OL Deuce

[OlDeuce]

Yup................