arclight
07-31-2008, 03:01 AM
Hi guys,
I'm getting ready to cast up some of the Lyman 12GA "wasp waist" slugs, and I'd like to confirm the load data.
I plan to use Winchester AA hulls, the WAA12F114 wads, and Hodgson Universal powder with a Winchester 209 primer.
I have load data for a standard 1 1/4oz shot load, that puts me around 24gr of Universal using the above components.
I also found an excerpt from the Lyman Shotgun loading manual online that says 29.5gr of Universal is correct with these components.
Can someone confirm that this is a valid load? I'd rather not rely on second-hand info without hearing from someone who's done it.
Thanks!
John
I'm getting ready to cast up some of the Lyman 12GA "wasp waist" slugs, and I'd like to confirm the load data.
I plan to use Winchester AA hulls, the WAA12F114 wads, and Hodgson Universal powder with a Winchester 209 primer.
I have load data for a standard 1 1/4oz shot load, that puts me around 24gr of Universal using the above components.
I also found an excerpt from the Lyman Shotgun loading manual online that says 29.5gr of Universal is correct with these components.
Can someone confirm that this is a valid load? I'd rather not rely on second-hand info without hearing from someone who's done it.
Thanks!
John